| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 22 Sep 2019 13:59:40 -0400
From: Brian Masney <masneyb@...tation.org>
To: a.hajda@...sung.com, narmstrong@...libre.com,
Laurent.pinchart@...asonboard.com
Cc: jonas@...boo.se, jernej.skrabec@...l.net, airlied@...ux.ie,
daniel@...ll.ch, dri-devel@...ts.freedesktop.org,
linux-kernel@...r.kernel.org, enric.balletbo@...labora.com,
Laurent Pinchart <laurent.pinchart@...asonboard.com>
Subject: [PATCH v3] drm/bridge: analogix-anx78xx: add support for 7808 addresses
According to the downstream Android sources, the anx7808 variants use
address 0x78 for TX_P0 and the anx781x variants use address 0x70. Since
the datasheets aren't available for these devices, and we only have the
downstream kernel sources to look at, let's assume that these addresses
are fixed based on the model, and pass the i2c addresses to the driver
via the data pointer in the driver's of_match_table.
Signed-off-by: Brian Masney <masneyb@...tation.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
---
Changes since v2:
- Change comments in analogix-anx78xx.h from using the address to the
name
drivers/gpu/drm/bridge/analogix-anx78xx.c | 36 +++++++++++++++--------
drivers/gpu/drm/bridge/analogix-anx78xx.h | 17 ++++-------
2 files changed, 28 insertions(+), 25 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
index 8daee6b1fa88..dec3f7e66aa0 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -38,12 +38,20 @@
#define AUX_CH_BUFFER_SIZE 16
#define AUX_WAIT_TIMEOUT_MS 15
-static const u8 anx78xx_i2c_addresses[] = {
- [I2C_IDX_TX_P0] = TX_P0,
- [I2C_IDX_TX_P1] = TX_P1,
- [I2C_IDX_TX_P2] = TX_P2,
- [I2C_IDX_RX_P0] = RX_P0,
- [I2C_IDX_RX_P1] = RX_P1,
+static const u8 anx7808_i2c_addresses[] = {
+ [I2C_IDX_TX_P0] = 0x78,
+ [I2C_IDX_TX_P1] = 0x7a,
+ [I2C_IDX_TX_P2] = 0x72,
+ [I2C_IDX_RX_P0] = 0x7e,
+ [I2C_IDX_RX_P1] = 0x80,
+};
+
+static const u8 anx781x_i2c_addresses[] = {
+ [I2C_IDX_TX_P0] = 0x70,
+ [I2C_IDX_TX_P1] = 0x7a,
+ [I2C_IDX_TX_P2] = 0x72,
+ [I2C_IDX_RX_P0] = 0x7e,
+ [I2C_IDX_RX_P1] = 0x80,
};
struct anx78xx_platform_data {
@@ -1315,6 +1323,7 @@ static int anx78xx_i2c_probe(struct i2c_client *client,
struct anx78xx *anx78xx;
struct anx78xx_platform_data *pdata;
unsigned int i, idl, idh, version;
+ const u8 *i2c_addresses;
bool found = false;
int err;
@@ -1354,15 +1363,16 @@ static int anx78xx_i2c_probe(struct i2c_client *client,
}
/* Map slave addresses of ANX7814 */
+ i2c_addresses = device_get_match_data(&client->dev);
for (i = 0; i < I2C_NUM_ADDRESSES; i++) {
struct i2c_client *i2c_dummy;
i2c_dummy = i2c_new_dummy_device(client->adapter,
- anx78xx_i2c_addresses[i] >> 1);
+ i2c_addresses[i] >> 1);
if (IS_ERR(i2c_dummy)) {
err = PTR_ERR(i2c_dummy);
DRM_ERROR("Failed to reserve I2C bus %02x: %d\n",
- anx78xx_i2c_addresses[i], err);
+ i2c_addresses[i], err);
goto err_unregister_i2c;
}
@@ -1372,7 +1382,7 @@ static int anx78xx_i2c_probe(struct i2c_client *client,
if (IS_ERR(anx78xx->map[i])) {
err = PTR_ERR(anx78xx->map[i]);
DRM_ERROR("Failed regmap initialization %02x\n",
- anx78xx_i2c_addresses[i]);
+ i2c_addresses[i]);
goto err_unregister_i2c;
}
}
@@ -1471,10 +1481,10 @@ MODULE_DEVICE_TABLE(i2c, anx78xx_id);
#if IS_ENABLED(CONFIG_OF)
static const struct of_device_id anx78xx_match_table[] = {
- { .compatible = "analogix,anx7808", },
- { .compatible = "analogix,anx7812", },
- { .compatible = "analogix,anx7814", },
- { .compatible = "analogix,anx7818", },
+ { .compatible = "analogix,anx7808", .data = anx7808_i2c_addresses },
+ { .compatible = "analogix,anx7812", .data = anx781x_i2c_addresses },
+ { .compatible = "analogix,anx7814", .data = anx781x_i2c_addresses },
+ { .compatible = "analogix,anx7818", .data = anx781x_i2c_addresses },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, anx78xx_match_table);
diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix-anx78xx.h
index 25e063bcecbc..55d6c2109740 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.h
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.h
@@ -6,15 +6,8 @@
#ifndef __ANX78xx_H
#define __ANX78xx_H
-#define TX_P0 0x70
-#define TX_P1 0x7a
-#define TX_P2 0x72
-
-#define RX_P0 0x7e
-#define RX_P1 0x80
-
/***************************************************************/
-/* Register definition of device address 0x7e */
+/* Register definitions for RX_PO */
/***************************************************************/
/*
@@ -171,7 +164,7 @@
#define SP_VSI_RCVD BIT(1)
/***************************************************************/
-/* Register definition of device address 0x80 */
+/* Register definitions for RX_P1 */
/***************************************************************/
/* HDCP BCAPS Shadow Register */
@@ -217,7 +210,7 @@
#define SP_SET_AVMUTE BIT(0)
/***************************************************************/
-/* Register definition of device address 0x70 */
+/* Register definitions for TX_P0 */
/***************************************************************/
/* HDCP Status Register */
@@ -451,7 +444,7 @@
#define SP_DP_BUF_DATA0_REG 0xf0
/***************************************************************/
-/* Register definition of device address 0x72 */
+/* Register definitions for TX_P2 */
/***************************************************************/
/*
@@ -674,7 +667,7 @@
#define SP_INT_CTRL_REG 0xff
/***************************************************************/
-/* Register definition of device address 0x7a */
+/* Register definitions for TX_P1 */
/***************************************************************/
/* DP TX Link Training Control Register */
--
2.21.0
Powered by blists - more mailing lists