| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 05 Jan 2024 15:54:28 +0100
From: Luca Weiss <luca.weiss@...rphone.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Luca Weiss <luca.weiss@...rphone.com>
Subject: [PATCH 2/2] arm64: dts: qcom: sm7225-fairphone-fp4: Add PM6150L
thermals
Configure the thermals for the PA_THERM1, MSM_THERM, PA_THERM0,
RFC_CAM_THERM, CAM_FLASH_THERM and QUIET_THERM thermistors connected to
PM6150L.
Due to hardware constraints we can only register 4 zones with
pm6150l_adc_tm, the other 2 we can register via generic-adc-thermal.
The trip points can really only be considered as placeholders, more
configuration with cooling etc. can be added later.
Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
---
arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 191 ++++++++++++++++++++++
1 file changed, 191 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index b7ccfe4011bb..6f435a7ed855 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -84,6 +84,20 @@ memory@...01000 {
};
};
+ msm_therm_sensor: thermal-sensor-msm {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&pm6150l_adc ADC5_AMUX_THM2_100K_PU>;
+ io-channel-names = "sensor-channel";
+ };
+
+ rear_cam_sensor: thermal-sensor-rear-cam {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&pm6150l_adc ADC5_GPIO2_100K_PU>;
+ io-channel-names = "sensor-channel";
+ };
+
thermal-zones {
chg-skin-thermal {
polling-delay-passive = <0>;
@@ -113,6 +127,90 @@ active-config0 {
};
};
+ pa0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm6150l_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pa1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm6150l_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ quiet-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm6150l_adc_tm 3>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ rear-cam-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&rear_cam_sensor>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ rfc-flash-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm6150l_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ sdm-skin-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&msm_therm_sensor>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
xo-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
@@ -423,6 +521,91 @@ &mpss {
status = "okay";
};
+&pm6150l_adc {
+ pinctrl-0 = <&pm6150l_adc_default>;
+ pinctrl-names = "default";
+
+ channel@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pa_therm1";
+ };
+
+ channel@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "msm_therm";
+ };
+
+ channel@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pa_therm0";
+ };
+
+ channel@53 {
+ reg = <ADC5_GPIO2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "rear_cam_therm";
+ };
+
+ channel@54 {
+ reg = <ADC5_GPIO3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "rear_cam_flash_therm";
+ };
+
+ channel@55 {
+ reg = <ADC5_GPIO4_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "quiet_therm";
+ };
+};
+
+&pm6150l_adc_tm {
+ status = "okay";
+
+ pa-therm1@0 {
+ reg = <0>;
+ io-channels = <&pm6150l_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pa-therm0@1 {
+ reg = <1>;
+ io-channels = <&pm6150l_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ rear-cam-flash-therm@2 {
+ reg = <2>;
+ io-channels = <&pm6150l_adc ADC5_GPIO3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ quiet-therm@3 {
+ reg = <3>;
+ io-channels = <&pm6150l_adc ADC5_GPIO4_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
&pm6150l_flash {
status = "okay";
@@ -445,6 +628,14 @@ led-1 {
};
};
+&pm6150l_gpios {
+ pm6150l_adc_default: adc-default-state {
+ pins = "gpio6", "gpio7", "gpio10";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-high-impedance;
+ };
+};
+
&pm6150l_wled {
qcom,switching-freq = <800>;
qcom,current-limit-microamp = <20000>;
--
2.43.0
Powered by blists - more mailing lists