| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 11 Dec 2006 11:25:09 +0100
From: Brice Goglin <brice@...i.com>
To: Jeff Garzik <jeff@...zik.org>, netdev@...r.kernel.org
Subject: [PATCH 2/7] myri10ge: add page-based skb routines
Add physical page skb allocation routines and page based rx_done,
to be used by upcoming patches.
Signed-off-by: Brice Goglin <brice@...i.com>
---
drivers/net/myri10ge/myri10ge.c | 190 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 190 insertions(+)
Index: linux-git/drivers/net/myri10ge/myri10ge.c
===================================================================
--- linux-git.orig/drivers/net/myri10ge/myri10ge.c 2006-12-11 10:52:08.000000000 +0100
+++ linux-git/drivers/net/myri10ge/myri10ge.c 2006-12-11 10:52:26.000000000 +0100
@@ -92,8 +92,14 @@
#define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
#define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
+#define MYRI10GE_ALLOC_ORDER 0
+#define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
+#define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
+
struct myri10ge_rx_buffer_state {
struct sk_buff *skb;
+ struct page *page;
+ int page_offset;
DECLARE_PCI_UNMAP_ADDR(bus)
DECLARE_PCI_UNMAP_LEN(len)
};
@@ -116,9 +122,14 @@
u8 __iomem *wc_fifo; /* w/c rx dma addr fifo address */
struct mcp_kreq_ether_recv *shadow; /* host shadow of recv ring */
struct myri10ge_rx_buffer_state *info;
+ struct page *page;
+ dma_addr_t bus;
+ int page_offset;
int cnt;
+ int fill_cnt;
int alloc_fail;
int mask; /* number of rx slots -1 */
+ int watchdog_needed;
};
struct myri10ge_tx_buf {
@@ -150,6 +161,7 @@
struct myri10ge_rx_buf rx_big;
struct myri10ge_rx_done rx_done;
int small_bytes;
+ int big_bytes;
struct net_device *dev;
struct net_device_stats stats;
u8 __iomem *sram;
@@ -266,6 +278,10 @@
module_param(myri10ge_debug, int, 0);
MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
+static int myri10ge_fill_thresh = 256;
+module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed\n");
+
#define MYRI10GE_FW_OFFSET 1024*1024
#define MYRI10GE_HIGHPART_TO_U32(X) \
(sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
@@ -958,6 +974,180 @@
}
}
+static inline void
+myri10ge_rx_skb_build(struct sk_buff *skb, u8 * va,
+ struct skb_frag_struct *rx_frags, int len, int hlen)
+{
+ struct skb_frag_struct *skb_frags;
+
+ skb->len = skb->data_len = len;
+ skb->truesize = len + sizeof(struct sk_buff);
+ /* attach the page(s) */
+
+ skb_frags = skb_shinfo(skb)->frags;
+ while (len > 0) {
+ memcpy(skb_frags, rx_frags, sizeof(*skb_frags));
+ len -= rx_frags->size;
+ skb_frags++;
+ rx_frags++;
+ skb_shinfo(skb)->nr_frags++;
+ }
+
+ /* pskb_may_pull is not available in irq context, but
+ * skb_pull() (for ether_pad and eth_type_trans()) requires
+ * the beginning of the packet in skb_headlen(), move it
+ * manually */
+ memcpy(skb->data, va, hlen);
+ skb_shinfo(skb)->frags[0].page_offset += hlen;
+ skb_shinfo(skb)->frags[0].size -= hlen;
+ skb->data_len -= hlen;
+ skb->tail += hlen;
+ skb_pull(skb, MXGEFW_PAD);
+}
+
+static void
+myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
+ int bytes, int watchdog)
+{
+ struct page *page;
+ int idx;
+
+ if (unlikely(rx->watchdog_needed && !watchdog))
+ return;
+
+ /* try to refill entire ring */
+ while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
+ idx = rx->fill_cnt & rx->mask;
+
+ if ((bytes < MYRI10GE_ALLOC_SIZE / 2) &&
+ (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE)) {
+ /* we can use part of previous page */
+ get_page(rx->page);
+ } else {
+ /* we need a new page */
+ page =
+ alloc_pages(GFP_ATOMIC | __GFP_COMP,
+ MYRI10GE_ALLOC_ORDER);
+ if (unlikely(page == NULL)) {
+ if (rx->fill_cnt - rx->cnt < 16)
+ rx->watchdog_needed = 1;
+ return;
+ }
+ rx->page = page;
+ rx->page_offset = 0;
+ rx->bus = pci_map_page(mgp->pdev, page, 0,
+ MYRI10GE_ALLOC_SIZE,
+ PCI_DMA_FROMDEVICE);
+ }
+ rx->info[idx].page = rx->page;
+ rx->info[idx].page_offset = rx->page_offset;
+ /* note that this is the address of the start of the
+ * page */
+ pci_unmap_addr_set(&rx->info[idx], bus, rx->bus);
+ rx->shadow[idx].addr_low =
+ htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset);
+ rx->shadow[idx].addr_high =
+ htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus));
+
+ /* start next packet on a cacheline boundary */
+ rx->page_offset += SKB_DATA_ALIGN(bytes);
+ rx->fill_cnt++;
+
+ /* copy 8 descriptors to the firmware at a time */
+ if ((idx & 7) == 7) {
+ if (rx->wc_fifo == NULL)
+ myri10ge_submit_8rx(&rx->lanai[idx - 7],
+ &rx->shadow[idx - 7]);
+ else {
+ mb();
+ myri10ge_pio_copy(rx->wc_fifo,
+ &rx->shadow[idx - 7], 64);
+ }
+ }
+ }
+}
+
+static inline void
+myri10ge_unmap_rx_page(struct pci_dev *pdev,
+ struct myri10ge_rx_buffer_state *info, int bytes)
+{
+ /* unmap the recvd page if we're the only or last user of it */
+ if (bytes >= MYRI10GE_ALLOC_SIZE / 2 ||
+ (info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) {
+ pci_unmap_page(pdev, (pci_unmap_addr(info, bus)
+ & ~(MYRI10GE_ALLOC_SIZE - 1)),
+ MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+ }
+}
+
+#define MYRI10GE_HLEN 64 /* The number of bytes to copy from a
+ * page into an skb */
+
+static inline int
+myri10ge_page_rx_done(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
+ int bytes, int len, __wsum csum)
+{
+ struct sk_buff *skb;
+ struct skb_frag_struct rx_frags[MYRI10GE_MAX_FRAGS_PER_FRAME];
+ int i, idx, hlen, remainder;
+ struct pci_dev *pdev = mgp->pdev;
+ struct net_device *dev = mgp->dev;
+ u8 *va;
+
+ len += MXGEFW_PAD;
+ idx = rx->cnt & rx->mask;
+ va = page_address(rx->info[idx].page) + rx->info[idx].page_offset;
+ prefetch(va);
+ /* Fill skb_frag_struct(s) with data from our receive */
+ for (i = 0, remainder = len; remainder > 0; i++) {
+ myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
+ rx_frags[i].page = rx->info[idx].page;
+ rx_frags[i].page_offset = rx->info[idx].page_offset;
+ if (remainder < MYRI10GE_ALLOC_SIZE)
+ rx_frags[i].size = remainder;
+ else
+ rx_frags[i].size = MYRI10GE_ALLOC_SIZE;
+ rx->cnt++;
+ idx = rx->cnt & rx->mask;
+ remainder -= MYRI10GE_ALLOC_SIZE;
+ }
+
+ hlen = MYRI10GE_HLEN > len ? len : MYRI10GE_HLEN;
+
+ /* allocate an skb to attach the page(s) to. */
+
+ skb = netdev_alloc_skb(dev, MYRI10GE_HLEN + 16);
+ if (unlikely(skb == NULL)) {
+ mgp->stats.rx_dropped++;
+ do {
+ i--;
+ put_page(rx_frags[i].page);
+ } while (i != 0);
+ return 0;
+ }
+
+ /* Attach the pages to the skb, and trim off any padding */
+ myri10ge_rx_skb_build(skb, va, rx_frags, len, hlen);
+ if (skb_shinfo(skb)->frags[0].size <= 0) {
+ put_page(skb_shinfo(skb)->frags[0].page);
+ skb_shinfo(skb)->nr_frags = 0;
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->dev = dev;
+
+ if (mgp->csum_flag) {
+ if ((skb->protocol == htons(ETH_P_IP)) ||
+ (skb->protocol == htons(ETH_P_IPV6))) {
+ skb->csum = csum;
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ } else
+ myri10ge_vlan_ip_csum(skb, csum);
+ }
+ netif_receive_skb(skb);
+ dev->last_rx = jiffies;
+ return 1;
+}
+
static inline unsigned long
myri10ge_rx_done(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
int bytes, int len, __wsum csum)
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists