| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 8 Feb 2007 23:10:18 +0200
From: Maxim Levitsky <maximlevitsky@...il.com>
To: netdev@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Subject: [PATCH 2.6.20 1/5] dmfe : trivial/spelling fixes
From: Maxim Levitsky <maximlevitsky@...il.com>
Subject: [PATCH 2.6.20 1/5] dmfe : trivial/spelling fixes
Fix a typo, wrap lines on 80-th column, change KERN_ERR to KERN_INFO for
link status message
Signed-off-by: Maxim Levitsky <maximlevitsky@...il.com>
---
--- linux-2.6.20-orig/drivers/net/tulip/dmfe.c 2007-02-03 11:47:52.000000000
+0200
+++ linux-2.6.20-test/drivers/net/tulip/dmfe.c 2007-02-08 20:29:33.000000000
+0200
@@ -143,9 +143,16 @@
#define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */
#define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */
-#define DMFE_DBUG(dbug_now, msg, value) if (dmfe_debug || (dbug_now))
printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
-
-#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed
to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
+#define DMFE_DBUG(dbug_now, msg, value) \
+ do { \
+ if (dmfe_debug || (dbug_now)) \
+ printk(KERN_ERR DRV_NAME ": %s %lx\n",\
+ (msg), (long) (value)); \
+ } while (0)
+
+#define SHOW_MEDIA_TYPE(mode) \
+ printk (KERN_INFO DRV_NAME ": Change Speed to %sMhz %s duplex\n" , \
+ (mode & 1) ? "100":"10", (mode & 4) ? "full":"half");
/* CR9 definition: SROM/MII */
@@ -163,10 +170,20 @@
#define SROM_V41_CODE 0x14
-#define SROM_CLK_WRITE(data, ioaddr) outl(data|CR9_SROM_READ|
CR9_SRCS,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS|
CR9_SRCLK,ioaddr);udelay(5);outl(data|CR9_SROM_READ|
CR9_SRCS,ioaddr);udelay(5);
+#define SROM_CLK_WRITE(data, ioaddr) \
+ outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
+ udelay(5); \
+ outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \
+ udelay(5); \
+ outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
+ udelay(5);
+
+#define __CHK_IO_SIZE(pci_id, dev_rev) \
+ (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? \
+ DM9102A_IO_SIZE: DM9102_IO_SIZE)
-#define __CHK_IO_SIZE(pci_id, dev_rev) ( ((pci_id)==PCI_DM9132_ID) ||
((dev_rev) >= 0x02000030) ) ? DM9102A_IO_SIZE: DM9102_IO_SIZE
-#define CHK_IO_SIZE(pci_dev, dev_rev) __CHK_IO_SIZE(((pci_dev)->device <<
16) | (pci_dev)->vendor, dev_rev)
+#define CHK_IO_SIZE(pci_dev, dev_rev) \
+ (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev))
/* Sten Check */
#define DEVICE net_device
@@ -329,7 +346,7 @@ static void dmfe_program_DM9802(struct d
static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * );
static void dmfe_set_phyxcer(struct dmfe_board_info *);
-/* DM910X network baord routine ---------------------------- */
+/* DM910X network board routine ---------------------------- */
/*
* Search DM910X board ,allocate space and register it
@@ -356,7 +373,8 @@ static int __devinit dmfe_init_one (stru
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
- printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
+ printk(KERN_WARNING DRV_NAME
+ ": 32-bit PCI DMA not available.\n");
err = -ENODEV;
goto err_out_free;
}
@@ -402,8 +420,11 @@ static int __devinit dmfe_init_one (stru
db->dev = dev;
/* Allocate Tx/Rx descriptor memory */
- db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) *
DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
- db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT +
4, &db->buf_pool_dma_ptr);
+ db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) *
+ DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
+
+ db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC *
+ TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
db->first_tx_desc_dma = db->desc_pool_dma_ptr;
@@ -440,7 +461,8 @@ static int __devinit dmfe_init_one (stru
/* read 64 word srom data */
for (i = 0; i < 64; i++)
- ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
+ ((u16 *) db->srom)[i] =
+ cpu_to_le16(read_srom_word(db->ioaddr, i));
/* Set Node address */
for (i = 0; i < 6; i++)
@@ -509,7 +531,8 @@ static int dmfe_open(struct DEVICE *dev)
DMFE_DBUG(0, "dmfe_open", 0);
- ret = request_irq(dev->irq, &dmfe_interrupt, IRQF_SHARED, dev->name, dev);
+ ret = request_irq(dev->irq, &dmfe_interrupt,
+ IRQF_SHARED, dev->name, dev);
if (ret)
return ret;
@@ -650,7 +673,8 @@ static int dmfe_start_xmit(struct sk_buf
/* No Tx resource check, it never happen nromally */
if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) {
spin_unlock_irqrestore(&db->lock, flags);
- printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_queue_cnt);
+ printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n",
+ db->tx_queue_cnt);
return 1;
}
@@ -722,7 +746,8 @@ static int dmfe_stop(struct DEVICE *dev)
#if 0
/* show statistic counter */
- printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx
RCR8:%lx FAL:%lx TT:%lx\n",
+ printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx"
+ " LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
db->tx_fifo_underrun, db->tx_excessive_collision,
db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
@@ -919,7 +944,9 @@ static void dmfe_rx_packet(struct DEVICE
db->rx_avail_cnt--;
db->interval_rx_cnt++;
- pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE,
PCI_DMA_FROMDEVICE);
+ pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2),
+ RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+
if ( (rdes0 & 0x300) != 0x300) {
/* A packet without First/Last flag */
/* reuse this SKB */
@@ -1078,7 +1105,8 @@ static void dmfe_timer(unsigned long dat
if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) {
db->cr6_data &= ~0x40000;
update_cr6(db->cr6_data, db->ioaddr);
- phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
+ phy_write(db->ioaddr,
+ db->phy_addr, 0, 0x1000, db->chip_id);
db->cr6_data |= 0x40000;
update_cr6(db->cr6_data, db->ioaddr);
db->timer.expires = DMFE_TIMER_WUT + HZ * 2;
@@ -1153,7 +1181,8 @@ static void dmfe_timer(unsigned long dat
/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
/* AUTO or force 1M Homerun/Longrun don't need */
if ( !(db->media_mode & 0x38) )
- phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
+ phy_write(db->ioaddr, db->phy_addr,
+ 0, 0x1000, db->chip_id);
/* AUTO mode, if INT phyxcer link failed, select EXT device */
if (db->media_mode & DMFE_AUTO) {
@@ -1259,7 +1288,8 @@ static void dmfe_reuse_skb(struct dmfe_b
if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
rxptr->rx_skb_ptr = skb;
- rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data,
RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev,
+ skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
db->rx_avail_cnt++;
@@ -1291,8 +1321,11 @@ static void dmfe_descriptor_init(struct
outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */
/* rx descriptor start pointer */
- db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) *
TX_DESC_CNT;
- db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) *
TX_DESC_CNT;
+ db->first_rx_desc = (void *)db->first_tx_desc +
+ sizeof(struct tx_desc) * TX_DESC_CNT;
+
+ db->first_rx_desc_dma = db->first_tx_desc_dma +
+ sizeof(struct tx_desc) * TX_DESC_CNT;
db->rx_insert_ptr = db->first_rx_desc;
db->rx_ready_ptr = db->first_rx_desc;
outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */
@@ -1470,7 +1503,8 @@ static void allocate_rx_buffer(struct dm
if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
break;
rxptr->rx_skb_ptr = skb; /* FIXME (?) */
- rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data,
RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data,
+ RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
rxptr = rxptr->next_rx_desc;
@@ -1510,7 +1544,8 @@ static u16 read_srom_word(long ioaddr, i
for (i = 16; i > 0; i--) {
outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
udelay(5);
- srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
+ srom_data = (srom_data << 1) |
+ ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
udelay(5);
}
@@ -1537,9 +1572,11 @@ static u8 dmfe_sense_speed(struct dmfe_b
if ( (phy_mode & 0x24) == 0x24 ) {
if (db->chip_id == PCI_DM9132_ID) /* DM9132 */
- phy_mode = phy_read(db->ioaddr, db->phy_addr, 7, db->chip_id) & 0xf000;
+ phy_mode = phy_read(db->ioaddr,
+ db->phy_addr, 7, db->chip_id) & 0xf000;
else /* DM9102/DM9102A */
- phy_mode = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0xf000;
+ phy_mode = phy_read(db->ioaddr,
+ db->phy_addr, 17, db->chip_id) & 0xf000;
/* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
switch (phy_mode) {
case 0x1000: db->op_mode = DMFE_10MHF; break;
@@ -1576,8 +1613,11 @@ static void dmfe_set_phyxcer(struct dmfe
/* DM9009 Chip: Phyxcer reg18 bit12=0 */
if (db->chip_id == PCI_DM9009_ID) {
- phy_reg = phy_read(db->ioaddr, db->phy_addr, 18, db->chip_id) & ~0x1000;
- phy_write(db->ioaddr, db->phy_addr, 18, phy_reg, db->chip_id);
+ phy_reg = phy_read(db->ioaddr,
+ db->phy_addr, 18, db->chip_id) & ~0x1000;
+
+ phy_write(db->ioaddr,
+ db->phy_addr, 18, phy_reg, db->chip_id);
}
/* Phyxcer capability setting */
@@ -1650,10 +1690,12 @@ static void dmfe_process_mode(struct dmf
case DMFE_100MHF: phy_reg = 0x2000; break;
case DMFE_100MFD: phy_reg = 0x2100; break;
}
- phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+ phy_write(db->ioaddr,
+ db->phy_addr, 0, phy_reg, db->chip_id);
if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
mdelay(20);
- phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+ phy_write(db->ioaddr,
+ db->phy_addr, 0, phy_reg, db->chip_id);
}
}
}
@@ -1663,7 +1705,8 @@ static void dmfe_process_mode(struct dmf
* Write a word to Phy register
*/
-static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16
phy_data, u32 chip_id)
+static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
+ u16 phy_data, u32 chip_id)
{
u16 i;
unsigned long ioaddr;
@@ -1689,11 +1732,13 @@ static void phy_write(unsigned long ioba
/* Send Phy address */
for (i = 0x10; i > 0; i = i >> 1)
- phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
+ phy_write_1bit(ioaddr,
+ phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
/* Send register address */
for (i = 0x10; i > 0; i = i >> 1)
- phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0);
+ phy_write_1bit(ioaddr,
+ offset & i ? PHY_DATA_1 : PHY_DATA_0);
/* written trasnition */
phy_write_1bit(ioaddr, PHY_DATA_1);
@@ -1701,7 +1746,8 @@ static void phy_write(unsigned long ioba
/* Write a word data to PHY controller */
for ( i = 0x8000; i > 0; i >>= 1)
- phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0);
+ phy_write_1bit(ioaddr,
+ phy_data & i ? PHY_DATA_1 : PHY_DATA_0);
}
}
@@ -1738,11 +1784,13 @@ static u16 phy_read(unsigned long iobase
/* Send Phy address */
for (i = 0x10; i > 0; i = i >> 1)
- phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
+ phy_write_1bit(ioaddr,
+ phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
/* Send register address */
for (i = 0x10; i > 0; i = i >> 1)
- phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0);
+ phy_write_1bit(ioaddr,
+ offset & i ? PHY_DATA_1 : PHY_DATA_0);
/* Skip transition state */
phy_read_1bit(ioaddr);
@@ -1963,7 +2011,8 @@ static void dmfe_HPNA_remote_cmd_chk(str
/* Check remote device status match our setting ot not */
if ( phy_reg != (db->HPNA_command & 0x0f00) ) {
- phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id);
+ phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command,
+ db->chip_id);
db->HPNA_timer=8;
} else
db->HPNA_timer=600; /* Match, every 10 minutes, check */
@@ -2003,8 +2052,11 @@ module_param(HPNA_tx_cmd, byte, 0);
module_param(HPNA_NoiseFloor, byte, 0);
module_param(SF_mode, byte, 0);
MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)");
-MODULE_PARM_DESC(mode, "Davicom DM9xxx: Bit 0: 10/100Mbps, bit 2: duplex, bit
8: HomePNA");
-MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function (bit 0: VLAN, bit
1 Flow Control, bit 2: TX pause packet)");
+MODULE_PARM_DESC(mode, "Davicom DM9xxx: "
+ "Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
+
+MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function "
+ "(bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)");
/* Description:
* when user used insmod to add module, system invoked init_module()
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists