| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 24 Feb 2007 01:59:39 -0500 (EST)
From: Sivakumar Subramani <Sivakumar.Subramani@...erion.com>
To: jeff@...zik.org, netdev@...r.kernel.org
cc: leonid.grossman@...erion.com, sreenivasa.honnur@...erion.com,
ramkrishna.vepa@...erion.com, santosh.rastapur@...erion.com,
alicia.pena@...erion.com, sriram.rapuru@...erion.com
Subject: [PATCH 3/6] S2IO: Added a loadable parameter to enable or disable
vlan stripping in frame.
- Added code to not to strip vlan tag when driver is in promiscuous mode
- Added module loadable parameter 'vlan_tag_strip" through which user can
enable or disable vlan stripping irrespective of mode
( promiscuous or non-promiscuous ).
Signed-off-by: Sivakumar Subramani <sivakumar.subramani@...erion.com>
---
diff -urpN patch2/drivers/net/s2io.c patch3/drivers/net/s2io.c
--- patch2/drivers/net/s2io.c 2007-02-21 15:21:14.000000000 +0530
+++ patch3/drivers/net/s2io.c 2007-02-24 11:42:48.000000000 +0530
@@ -42,6 +42,14 @@
* Possible values '1' for enable '0' for disable. Default is '0'
* lro_max_pkts: This parameter defines maximum number of packets can be
* aggregated as a single large packet
+ * napi: This parameter used to enable/disable NAPI (polling Rx)
+ * Possible values '1' for enable and '0' for disable. Default is '1'
+ * ufo: This parameter used to enable/disable UDP Fragmentation Offload(UFO)
+ * Possible values '1' for enable and '0' for disable. Default is '0'
+ * vlan_tag_strip: This can be used to enable or disable vlan stripping.
+ * Possible values '1' for enable , '0' for disable.
+ * Default is '2' - which means disable in promisc mode
+ * and enable in non-promiscuous mode.
************************************************************************/
#include <linux/module.h>
@@ -293,6 +301,9 @@ static void s2io_vlan_rx_register(struct
spin_unlock_irqrestore(&nic->tx_lock, flags);
}
+/* A flag indicating whether 'RX_PA_CFG_STRIP_VLAN_TAG' bit is set or not */
+int vlan_strip_flag;
+
/* Unregister the vlan */
static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
{
@@ -404,6 +415,7 @@ S2IO_PARM_INT(indicate_max_pkts, 0);
S2IO_PARM_INT(napi, 1);
S2IO_PARM_INT(ufo, 0);
+S2IO_PARM_INT(vlan_tag_strip, NO_STRIP_IN_PROMISC);
static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
{DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
@@ -1371,7 +1383,7 @@ static int init_nic(struct s2io_nic *nic
&bar0->rts_frm_len_n[i]);
}
}
-
+
/* Disable differentiated services steering logic */
for (i = 0; i < 64; i++) {
if (rts_ds_steer(nic, i, 0) == FAILURE) {
@@ -1953,6 +1965,13 @@ static int start_nic(struct s2io_nic *ni
writeq(val64, &bar0->rx_pa_cfg);
}
+ if (vlan_tag_strip == 0) {
+ val64 = readq(&bar0->rx_pa_cfg);
+ val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
+ writeq(val64, &bar0->rx_pa_cfg);
+ vlan_strip_flag = 0;
+ }
+
/*
* Enabling MC-RLDRAM. After enabling the device, we timeout
* for around 100ms, which is approximately the time required
@@ -4352,6 +4371,13 @@ static void s2io_set_multicast(struct ne
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
writel((u32) (val64 >> 32), (add + 4));
+ if (vlan_tag_strip != 1) {
+ val64 = readq(&bar0->rx_pa_cfg);
+ val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
+ writeq(val64, &bar0->rx_pa_cfg);
+ vlan_strip_flag = 0;
+ }
+
val64 = readq(&bar0->mac_cfg);
sp->promisc_flg = 1;
DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n",
@@ -4367,6 +4393,13 @@ static void s2io_set_multicast(struct ne
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
writel((u32) (val64 >> 32), (add + 4));
+ if (vlan_tag_strip != 0) {
+ val64 = readq(&bar0->rx_pa_cfg);
+ val64 |= RX_PA_CFG_STRIP_VLAN_TAG;
+ writeq(val64, &bar0->rx_pa_cfg);
+ vlan_strip_flag = 1;
+ }
+
val64 = readq(&bar0->mac_cfg);
sp->promisc_flg = 0;
DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n",
@@ -6614,7 +6647,8 @@ static int rx_osm_handler(struct ring_in
if (!sp->lro) {
skb->protocol = eth_type_trans(skb, dev);
- if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
+ if ((sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2) &&
+ vlan_strip_flag)) {
/* Queueing the vlan frame to the upper layer */
if (napi)
vlan_hwaccel_receive_skb(skb, sp->vlgrp,
diff -urpN patch2/drivers/net/s2io.h patch3/drivers/net/s2io.h
--- patch2/drivers/net/s2io.h 2007-02-20 14:47:46.000000000 +0530
+++ patch3/drivers/net/s2io.h 2007-02-21 14:54:19.000000000 +0530
@@ -297,6 +297,9 @@ struct stat_block {
struct xpakStat xpak_stat;
};
+/* Default value for 'vlan_strip_tag' configuration parameter */
+#define NO_STRIP_IN_PROMISC 2
+
/*
* Structures representing different init time configuration
* parameters of the NIC.
diff -urpN patch2/drivers/net/s2io-regs.h patch3/drivers/net/s2io-regs.h
--- patch2/drivers/net/s2io-regs.h 2007-02-15 14:49:42.000000000 +0530
+++ patch3/drivers/net/s2io-regs.h 2007-02-16 11:03:55.000000000 +0530
@@ -430,6 +430,7 @@ struct XENA_dev_config {
#define TX_PA_CFG_IGNORE_SNAP_OUI BIT(2)
#define TX_PA_CFG_IGNORE_LLC_CTRL BIT(3)
#define TX_PA_CFG_IGNORE_L2_ERR BIT(6)
+#define RX_PA_CFG_STRIP_VLAN_TAG BIT(15)
/* Recent add, used only debug purposes. */
u64 pcc_enable;
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists