| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 26 Apr 2007 09:22:45 -0700
From: Auke Kok <auke-jan.h.kok@...el.com>
To: akpm@...l.org
Cc: jeff@...zik.org, jesse.brandeburg@...el.com, netdev@...r.kernel.org
Subject: [PATCH] It appears that some systems still like e100 better if it uses
From: Jesse Brandeburg <jesse.brandeburg@...el.com>
I/O access mode. Setting the new parameter use_io=1 will cause
all driver instances to use io mapping to access the register
space on the e100 device.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@...el.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@...el.com>
---
drivers/net/e100.c | 72 ++++++++++++++++++++++++++++------------------------
1 files changed, 39 insertions(+), 33 deletions(-)
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 7d9984a..7ca207c 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -159,7 +159,7 @@
#define DRV_NAME "e100"
#define DRV_EXT "-NAPI"
-#define DRV_VERSION "3.5.17-k2"DRV_EXT
+#define DRV_VERSION "3.5.17-k4"DRV_EXT
#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
#define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation"
#define PFX DRV_NAME ": "
@@ -174,10 +174,13 @@ MODULE_VERSION(DRV_VERSION);
static int debug = 3;
static int eeprom_bad_csum_allow = 0;
+static int use_io = 0;
module_param(debug, int, 0);
module_param(eeprom_bad_csum_allow, int, 0);
+module_param(use_io, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums");
+MODULE_PARM_DESC(use_io, "Force use of i/o access mode");
#define DPRINTK(nlevel, klevel, fmt, args...) \
(void)((NETIF_MSG_##nlevel & nic->msg_enable) && \
printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \
@@ -584,7 +587,7 @@ static inline void e100_write_flush(struct nic *nic)
{
/* Flush previous PCI writes through intermediate bridges
* by doing a benign read */
- (void)readb(&nic->csr->scb.status);
+ (void)ioread8(&nic->csr->scb.status);
}
static void e100_enable_irq(struct nic *nic)
@@ -592,7 +595,7 @@ static void e100_enable_irq(struct nic *nic)
unsigned long flags;
spin_lock_irqsave(&nic->cmd_lock, flags);
- writeb(irq_mask_none, &nic->csr->scb.cmd_hi);
+ iowrite8(irq_mask_none, &nic->csr->scb.cmd_hi);
e100_write_flush(nic);
spin_unlock_irqrestore(&nic->cmd_lock, flags);
}
@@ -602,7 +605,7 @@ static void e100_disable_irq(struct nic *nic)
unsigned long flags;
spin_lock_irqsave(&nic->cmd_lock, flags);
- writeb(irq_mask_all, &nic->csr->scb.cmd_hi);
+ iowrite8(irq_mask_all, &nic->csr->scb.cmd_hi);
e100_write_flush(nic);
spin_unlock_irqrestore(&nic->cmd_lock, flags);
}
@@ -611,11 +614,11 @@ static void e100_hw_reset(struct nic *nic)
{
/* Put CU and RU into idle with a selective reset to get
* device off of PCI bus */
- writel(selective_reset, &nic->csr->port);
+ iowrite32(selective_reset, &nic->csr->port);
e100_write_flush(nic); udelay(20);
/* Now fully reset device */
- writel(software_reset, &nic->csr->port);
+ iowrite32(software_reset, &nic->csr->port);
e100_write_flush(nic); udelay(20);
/* Mask off our interrupt line - it's unmasked after reset */
@@ -632,7 +635,7 @@ static int e100_self_test(struct nic *nic)
nic->mem->selftest.signature = 0;
nic->mem->selftest.result = 0xFFFFFFFF;
- writel(selftest | dma_addr, &nic->csr->port);
+ iowrite32(selftest | dma_addr, &nic->csr->port);
e100_write_flush(nic);
/* Wait 10 msec for self-test to complete */
msleep(10);
@@ -670,23 +673,23 @@ static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, u16 data)
for(j = 0; j < 3; j++) {
/* Chip select */
- writeb(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
for(i = 31; i >= 0; i--) {
ctrl = (cmd_addr_data[j] & (1 << i)) ?
eecs | eedi : eecs;
- writeb(ctrl, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
- writeb(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
}
/* Wait 10 msec for cmd to complete */
msleep(10);
/* Chip deselect */
- writeb(0, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(0, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
}
};
@@ -702,21 +705,21 @@ static u16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
cmd_addr_data = ((op_read << *addr_len) | addr) << 16;
/* Chip select */
- writeb(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
/* Bit-bang to read word from eeprom */
for(i = 31; i >= 0; i--) {
ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs;
- writeb(ctrl, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
- writeb(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
/* Eeprom drives a dummy zero to EEDO after receiving
* complete address. Use this to adjust addr_len. */
- ctrl = readb(&nic->csr->eeprom_ctrl_lo);
+ ctrl = ioread8(&nic->csr->eeprom_ctrl_lo);
if(!(ctrl & eedo) && i > 16) {
*addr_len -= (i - 16);
i = 17;
@@ -726,7 +729,7 @@ static u16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
}
/* Chip deselect */
- writeb(0, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(0, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
return le16_to_cpu(data);
@@ -797,7 +800,7 @@ static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
/* Previous command is accepted when SCB clears */
for(i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) {
- if(likely(!readb(&nic->csr->scb.cmd_lo)))
+ if(likely(!ioread8(&nic->csr->scb.cmd_lo)))
break;
cpu_relax();
if(unlikely(i > E100_WAIT_SCB_FAST))
@@ -809,8 +812,8 @@ static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
}
if(unlikely(cmd != cuc_resume))
- writel(dma_addr, &nic->csr->scb.gen_ptr);
- writeb(cmd, &nic->csr->scb.cmd_lo);
+ iowrite32(dma_addr, &nic->csr->scb.gen_ptr);
+ iowrite8(cmd, &nic->csr->scb.cmd_lo);
err_unlock:
spin_unlock_irqrestore(&nic->cmd_lock, flags);
@@ -888,7 +891,7 @@ static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
*/
spin_lock_irqsave(&nic->mdio_lock, flags);
for (i = 100; i; --i) {
- if (readl(&nic->csr->mdi_ctrl) & mdi_ready)
+ if (ioread32(&nic->csr->mdi_ctrl) & mdi_ready)
break;
udelay(20);
}
@@ -898,11 +901,11 @@ static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
spin_unlock_irqrestore(&nic->mdio_lock, flags);
return 0; /* No way to indicate timeout error */
}
- writel((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
+ iowrite32((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
for (i = 0; i < 100; i++) {
udelay(20);
- if ((data_out = readl(&nic->csr->mdi_ctrl)) & mdi_ready)
+ if ((data_out = ioread32(&nic->csr->mdi_ctrl)) & mdi_ready)
break;
}
spin_unlock_irqrestore(&nic->mdio_lock, flags);
@@ -1311,7 +1314,7 @@ static inline int e100_exec_cb_wait(struct nic *nic, struct sk_buff *skb,
}
/* ack any interupts, something could have been set */
- writeb(~0, &nic->csr->scb.stat_ack);
+ iowrite8(~0, &nic->csr->scb.stat_ack);
/* if the command failed, or is not OK, notify and return */
if (!counter || !(cb->status & cpu_to_le16(cb_ok))) {
@@ -1573,7 +1576,7 @@ static void e100_watchdog(unsigned long data)
* accidentally, due to hardware that shares a register between the
* interrupt mask bit and the SW Interrupt generation bit */
spin_lock_irq(&nic->cmd_lock);
- writeb(readb(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi);
+ iowrite8(ioread8(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi);
e100_write_flush(nic);
spin_unlock_irq(&nic->cmd_lock);
@@ -1902,7 +1905,7 @@ static irqreturn_t e100_intr(int irq, void *dev_id)
{
struct net_device *netdev = dev_id;
struct nic *nic = netdev_priv(netdev);
- u8 stat_ack = readb(&nic->csr->scb.stat_ack);
+ u8 stat_ack = ioread8(&nic->csr->scb.stat_ack);
DPRINTK(INTR, DEBUG, "stat_ack = 0x%02X\n", stat_ack);
@@ -1911,7 +1914,7 @@ static irqreturn_t e100_intr(int irq, void *dev_id)
return IRQ_NONE;
/* Ack interrupt(s) */
- writeb(stat_ack, &nic->csr->scb.stat_ack);
+ iowrite8(stat_ack, &nic->csr->scb.stat_ack);
if(likely(netif_rx_schedule_prep(netdev))) {
e100_disable_irq(nic);
@@ -2053,7 +2056,7 @@ static void e100_tx_timeout_task(struct work_struct *work)
struct net_device *netdev = nic->netdev;
DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n",
- readb(&nic->csr->scb.status));
+ ioread8(&nic->csr->scb.status));
e100_down(netdev_priv(netdev));
e100_up(netdev_priv(netdev));
}
@@ -2176,9 +2179,9 @@ static void e100_get_regs(struct net_device *netdev,
int i;
regs->version = (1 << 24) | nic->rev_id;
- buff[0] = readb(&nic->csr->scb.cmd_hi) << 24 |
- readb(&nic->csr->scb.cmd_lo) << 16 |
- readw(&nic->csr->scb.status);
+ buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
+ ioread8(&nic->csr->scb.cmd_lo) << 16 |
+ ioread16(&nic->csr->scb.status);
for(i = E100_PHY_REGS; i >= 0; i--)
buff[1 + E100_PHY_REGS - i] =
mdio_read(netdev, nic->mii.phy_id, i);
@@ -2550,7 +2553,10 @@ static int __devinit e100_probe(struct pci_dev *pdev,
SET_MODULE_OWNER(netdev);
SET_NETDEV_DEV(netdev, &pdev->dev);
- nic->csr = ioremap(pci_resource_start(pdev, 0), sizeof(struct csr));
+ if (use_io)
+ DPRINTK(PROBE, INFO, "using i/o access mode\n");
+
+ nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr));
if(!nic->csr) {
DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n");
err = -ENOMEM;
@@ -2627,7 +2633,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, "
"MAC addr %02X:%02X:%02X:%02X:%02X:%02X\n",
- (unsigned long long)pci_resource_start(pdev, 0), pdev->irq,
+ (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0), pdev->irq,
netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]);
@@ -2636,7 +2642,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
err_out_free:
e100_free(nic);
err_out_iounmap:
- iounmap(nic->csr);
+ pci_iounmap(pdev, nic->csr);
err_out_free_res:
pci_release_regions(pdev);
err_out_disable_pdev:
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists