00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266] 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] 00:09.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03) Linux version 2.6.20.14 (root@server) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #2 PREEMPT Thu Jun 21 09:11:50 CEST 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001f6f0000 end: 000000001f7f0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000001f7f0000 size: 0000000000003000 end: 000000001f7f3000 type: 4 copy_e820_map() start: 000000001f7f3000 size: 000000000000d000 end: 000000001f800000 type: 3 copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f7f0000 (usable) BIOS-e820: 000000001f7f0000 - 000000001f7f3000 (ACPI NVS) BIOS-e820: 000000001f7f3000 - 000000001f800000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 503MB LOWMEM available. Entering add_active_range(0, 0, 129008) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 129008 early_node_map[1] active PFN ranges 0: 0 -> 129008 On node 0 totalpages: 129008 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 975 pages used for memmap Normal zone: 123937 pages, LIFO batch:31 DMI 2.2 present. ACPI: RSDP (v000 CLE266 ) @ 0x000f6690 ACPI: RSDT (v001 CLE266 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1f7f3040 ACPI: FADT (v001 CLE266 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1f7f30c0 ACPI: DSDT (v001 CLE266 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Allocating PCI resources starting at 20000000 (gap: 1f800000:e07f0000) Detected 1000.450 MHz processor. Built 1 zonelists. Total pages: 128001 Kernel command line: BOOT_IMAGE=(hd0,1)/kernels/vmlinuz-2.6.20 root=/dev/sda2 splash=silent,fadein,tty=tty8,theme:riecom console=tty1 vga=791 pci=routeirq Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 500536k/516032k available (2425k kernel code, 14860k reserved, 1369k data, 168k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffff7000 - 0xfffff000 ( 32 kB) vmalloc : 0xe0000000 - 0xffff5000 ( 511 MB) lowmem : 0xc0000000 - 0xdf7f0000 ( 503 MB) .init : 0xc04b8000 - 0xc04e2000 ( 168 kB) .data : 0xc035e41c - 0xc04b4a10 (1369 kB) .text : 0xc0100000 - 0xc035e41c (2425 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2002.29 BogoMIPS (lpj=1001145) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0381b03f 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) CPU: L2 Cache: 64K (32 bytes/line) CPU: After all inits, caps: 0381b13f 00000000 00000000 00000000 00000000 000000dd 00000000 Compat vDSO mapped to ffffe000. CPU: Centaur VIA Nehemiah stepping 08 Checking 'hlt' instruction... OK. Checking for popad bug... OK. ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 9a20) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb3f0, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 4000-407f claimed by vt8235 PM PCI quirk: region 5000-500f claimed by vt8235 SMB Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *15 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 *12) SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: ec000000-edffffff PREFETCH window: e8000000-ebffffff PCI: Bus 2, cardbus bridge: 0000:00:09.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 20000000-23ffffff MEM window: 24000000-27ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 6248k freed audit: initializing netlink socket (disabled) audit(1182410582.259:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NTFS driver 2.1.28 [Flags: R/W]. io scheduler noop registered (default) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 VIA RNG detected Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA CLE266 chipset agpgart: AGP aperture is 64M @ 0xe4000000 vesafb: framebuffer at 0xe8000000, mapped to 0xe0080000, using 3072k, total 8192k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at c000:352c vesafb: pmi: set display start = c00c357a, set palette = c00c35eb vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fbsplash: console 0 using theme 'riecom' fbsplash: switched splash state to 'on' on console 0 fb0: VESA VGA frame buffer device input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (on) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 2 throttling states) ACPI: Thermal Zone [THRM] (29 C) ibm_acpi: ec object not found RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize loop: loaded (max 8 devices) via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: VIA VLink IRQ fixup for 0000:00:12.0, from 15 to 11 eth0: VIA Rhine II at 0xee006000, 00:e0:c5:54:88:a8, IRQ 11. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 11 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xe700-0xe707, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide SCSI Media Changer driver v0.25 ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.3: irq 12, io mem 0xee005000 ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: VIA VLink IRQ fixup for 0000:00:10.0, from 15 to 11 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-6: new high speed USB device using ehci_hcd and address 3 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: VIA VLink IRQ fixup for 0000:00:10.1, from 5 to 10 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 10, io base 0x0000e500 usb 1-6: configuration #1 chosen from 1 choice usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 11, io base 0x0000e600 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev input: Logitech Logitech USB Keyboard as /class/input/input3 input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:10.2-1 input: Logitech Logitech USB Keyboard as /class/input/input4 input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:10.2-1 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded device-mapper: multipath emc: version 0.0.3 loaded padlock: No VIA PadLock drivers have been loaded. padlock: Using VIA PadLock ACE for AES algorithm. padlock: VIA PadLock Hash Engine not detected. IPv4 over IPv4 tunneling driver TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' Using IPI Shortcut mode ACPI: (supports S0 S1 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 168k freed scsi 0:0:0:0: Direct-Access BUFFALO USB Flash Disk 4000 PQ: 0 ANSI: 0 CCS SCSI device sda: 16056320 512-byte hdwr sectors (8221 MB) sda: Write Protect is off sda: Mode Sense: 43 00 00 00 sda: assuming drive cache: write through SCSI device sda: 16056320 512-byte hdwr sectors (8221 MB) sda: Write Protect is off sda: Mode Sense: 43 00 00 00 sda: assuming drive cache: write through sda: sda1 sda2 sd 0:0:0:0: Attached scsi removable disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 usb-storage: device scan complete Time: acpi_pm clocksource has been installed. ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:11.5 to 64 ReiserFS: dm-0: found reiserfs format "3.6" with standard journal ReiserFS: dm-0: using ordered data mode ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-0: checking transaction log (dm-0) ReiserFS: dm-0: Using r5 hash to sort names fbsplash: console 1 using theme 'riecom' fbsplash: switched splash state to 'on' on console 1 fbsplash: console 2 using theme 'riecom' fbsplash: switched splash state to 'on' on console 2 fbsplash: console 3 using theme 'riecom' fbsplash: switched splash state to 'on' on console 3 fbsplash: console 4 using theme 'riecom' fbsplash: switched splash state to 'on' on console 4 fbsplash: console 5 using theme 'riecom' fbsplash: switched splash state to 'on' on console 5