lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Fri, 09 Nov 2007 16:38:37 -0800
From:	"Matt Carlson" <mcarlson@...adcom.com>
To:	davem@...emloft.net
cc:	netdev@...r.kernel.org, andy@...yhouse.net,
	"Michael Chan" <mchan@...adcom.com>
Subject: [PATCH 1/13] tg3: Fix 5761 PXEboot crash

When 5761 devices boot the machine using PXEboot, PXE leaves the device
active when it terminates.  The tg3 driver has code to detect this
condition and resets the device during initialization.  On 5761 devices,
device resets involve sending a driver state update message to the APE
on the 5761.  However, during this initialization stage, communications
to the APE registers have not yet been set up.  The driver then
dereferences a NULL pointer and crashes the machine.  The fix is to move
the APE register access setup earlier in the initialization code to
cover this condition.

Signed-off-by: Matt Carlson <mcarlson@...adcom.com>
Signed-off-by: Michael Chan <mchan@...adcom.com>

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index cad5199..ddeaa0c 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12464,6 +12464,28 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 		goto err_out_iounmap;
 	}
 
+	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+		if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
+			printk(KERN_ERR PFX "Cannot find proper PCI device "
+			       "base address for APE, aborting.\n");
+			err = -ENODEV;
+			goto err_out_iounmap;
+		}
+
+		tg3reg_base = pci_resource_start(pdev, 2);
+		tg3reg_len = pci_resource_len(pdev, 2);
+
+		tp->aperegs = ioremap_nocache(tg3reg_base, tg3reg_len);
+		if (tp->aperegs == 0UL) {
+			printk(KERN_ERR PFX "Cannot map APE registers, "
+			       "aborting.\n");
+			err = -ENOMEM;
+			goto err_out_iounmap;
+		}
+
+		tg3_ape_lock_init(tp);
+	}
+
 	/*
 	 * Reset chip in case UNDI or EFI driver did not shutdown
 	 * DMA self test will enable WDMAC and we'll see (spurious)
@@ -12478,7 +12500,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	err = tg3_test_dma(tp);
 	if (err) {
 		printk(KERN_ERR PFX "DMA engine test failed, aborting.\n");
-		goto err_out_iounmap;
+		goto err_out_apeunmap;
 	}
 
 	/* Tigon3 can do ipv4 only... and some chips have buggy
@@ -12501,28 +12523,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
 	tg3_init_coal(tp);
 
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
-		if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
-			printk(KERN_ERR PFX "Cannot find proper PCI device "
-			       "base address for APE, aborting.\n");
-			err = -ENODEV;
-			goto err_out_iounmap;
-		}
-
-		tg3reg_base = pci_resource_start(pdev, 2);
-		tg3reg_len = pci_resource_len(pdev, 2);
-
-		tp->aperegs = ioremap_nocache(tg3reg_base, tg3reg_len);
-		if (tp->aperegs == 0UL) {
-			printk(KERN_ERR PFX "Cannot map APE registers, "
-			       "aborting.\n");
-			err = -ENOMEM;
-			goto err_out_iounmap;
-		}
-
-		tg3_ape_lock_init(tp);
-	}
-
 	pci_set_drvdata(pdev, dev);
 
 	err = register_netdev(dev);


-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ