| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 14 May 2008 16:19:43 -0700
From: akpm@...ux-foundation.org
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, akpm@...ux-foundation.org,
mark.asselstine@...driver.com, kkeil@...e.de
Subject: [patch 4/8] hysdn: remove cli()/sti() calls
From: Mark Asselstine <mark.asselstine@...driver.com>
The use of cli()/sti() within the do/while was a way to ensure interrupts were
only disabled for short periods of time while the bulk of the time interrupts
were free to occur. The use of the spin lock has eliminated the need to play
with interrupts in this way while still allowing for IO to be protected.
The remaining 3 sti() calls seem unneeded now that at no other point in the
driver is there a call to cli().
Signed-off-by: Mark Asselstine <mark.asselstine@...driver.com>
Acked-by: Karsten Keil <kkeil@...e.de>
Signed-off-by: Andrew Morton <akpm@...ux-foundation.org>
---
drivers/isdn/hysdn/boardergo.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff -puN drivers/isdn/hysdn/boardergo.c~hysdn-remove-cli-sti-calls drivers/isdn/hysdn/boardergo.c
--- a/drivers/isdn/hysdn/boardergo.c~hysdn-remove-cli-sti-calls
+++ a/drivers/isdn/hysdn/boardergo.c
@@ -64,10 +64,11 @@ ergo_interrupt(int intno, void *dev_id)
} /* ergo_interrupt */
/******************************************************************************/
-/* ergo_irq_bh is the function called by the immediate kernel task list after */
-/* being activated with queue_task and no interrupts active. This task is the */
-/* only one handling data transfer from or to the card after booting. The task */
-/* may be queued from everywhere (interrupts included). */
+/* ergo_irq_bh will be called as part of the kernel clearing its shared work */
+/* queue sometime after a call to schedule_work has been made passing our */
+/* work_struct. This task is the only one handling data transfer from or to */
+/* the card after booting. The task may be queued from everywhere */
+/* (interrupts included). */
/******************************************************************************/
static void
ergo_irq_bh(struct work_struct *ugli_api)
@@ -90,7 +91,6 @@ ergo_irq_bh(struct work_struct *ugli_api
card->hw_lock = 1; /* we now lock the hardware */
do {
- sti(); /* reenable other ints */
again = 0; /* assume loop not to be repeated */
if (!dpr->ToHyFlag) {
@@ -110,7 +110,6 @@ ergo_irq_bh(struct work_struct *ugli_api
again = 1; /* restart loop */
}
} /* a message has arrived for us */
- cli(); /* no further ints */
if (again) {
dpr->ToHyInt = 1;
dpr->ToPcInt = 1; /* interrupt to E1 for all cards */
@@ -242,7 +241,6 @@ ergo_writebootimg(struct HYSDN_CARD *car
byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RUN); /* start E1 processor */
/* the interrupts are still masked */
- sti();
msleep_interruptible(20); /* Timeout 20ms */
if (((tDpramBootSpooler *) card->dpram)->Len != DPRAM_SPOOLER_DATA_SIZE) {
@@ -276,7 +274,6 @@ ergo_writebootseq(struct HYSDN_CARD *car
dst = sp->Data; /* point to data in spool structure */
buflen = sp->Len; /* maximum len of spooled data */
wr_mirror = sp->WrPtr; /* only once read */
- sti();
/* try until all bytes written or error */
i = 0x1000; /* timeout value */
@@ -380,7 +377,6 @@ ergo_waitpofready(struct HYSDN_CARD *car
#endif /* CONFIG_HYSDN_CAPI */
return (0); /* success */
} /* data has arrived */
- sti();
msleep_interruptible(50); /* Timeout 50ms */
} /* wait until timeout */
_
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists