lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Mon, 9 Jun 2008 11:25:17 -0700
From:	"Matt Carlson" <mcarlson@...adcom.com>
To:	davem@...emloft.net
cc:	netdev@...r.kernel.org, "Michael Chan" <mchan@...adcom.com>,
	andy@...yhouse.net
Subject: [PATCH 1/4] tg3: Fix 5714S / 5715S / 5780S link failures

The git commit ef167e27039eeaea6d3cdd5c547b082e89840bdd entitled
"Fix supporting flowctrl code" introduced a bug that prevents 5714S,
5715S and 5780S devices from falling back to a forced link mode.  The
problem is that the added flow control check will always fail if flow
control is set to autoneg and either RX or TX (or both) flow control
is enabled.  The driver defaults to setting flow control to autoneg
and advertises both RX and TX flow control.

The fix is to remove the errant check.

Signed-off-by: Matt Carlson <mcarlson@...adcom.com>
Signed-off-by: Michael Chan <mchan@...adcom.com>

---
 drivers/net/tg3.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 07b3f77..4c248d7 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -3168,8 +3168,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
 	err |= tg3_readphy(tp, MII_BMCR, &bmcr);
 
 	if ((tp->link_config.autoneg == AUTONEG_ENABLE) && !force_reset &&
-	    (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT) &&
-	     tp->link_config.flowctrl == tp->link_config.active_flowctrl) {
+	    (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) {
 		/* do nothing, just check for link up at the end */
 	} else if (tp->link_config.autoneg == AUTONEG_ENABLE) {
 		u32 adv, new_adv;
-- 
1.5.2.5



--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ