| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 21 Jul 2008 08:10:52 -0700 (PDT)
From: David Miller <davem@...emloft.net>
To: mingo@...e.hu
Cc: torvalds@...ux-foundation.org, akpm@...ux-foundation.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-wireless@...r.kernel.org
Subject: Re: [crash] BUG: unable to handle kernel NULL pointer dereference
at 0000000000000370
From: Ingo Molnar <mingo@...e.hu>
Date: Mon, 21 Jul 2008 16:30:23 +0200
>
> * Ingo Molnar <mingo@...e.hu> wrote:
>
> > Pid: 1, comm: swapper Not tainted 2.6.26-tip-00013-g6de15c6-dirty #21290
>
> some more information: find below the same crash with vanilla
> linus/master and no extra patches. The crash site is:
Johannes/wireless-folks, can you take a look at this?
Thanks.
>
> (gdb) list *0xffffffff808be0c2
> 0xffffffff808be0c2 is in rollback_registered (net/core/dev.c:3793).
> 3788 {
> 3789 BUG_ON(dev_boot_phase);
> 3790 ASSERT_RTNL();
> 3791
> 3792 /* Some devices call without registering for initialization unwind. */
> 3793 if (dev->reg_state == NETREG_UNINITIALIZED) {
> 3794 printk(KERN_DEBUG "unregister_netdevice: device %s/%p never "
> 3795 "was registered\n", dev->name, dev);
> 3796
> 3797 WARN_ON(1);
> (gdb)
>
> Thanks,
>
> Ingo
>
> ----------------------------------->
> Linux version 2.6.26-05253-g14b395e (mingo@...ne) (gcc version 4.2.3) #21308 SMP Mon Jul 21 16:14:51 CEST 2008
> Command line: root=/dev/sda1 earlyprintk=vga console=ttyS0,115200 console=tty 5 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled pci=nomsi
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ed94000 (usable)
> BIOS-e820: 000000003ed94000 - 000000003ee4e000 (ACPI NVS)
> BIOS-e820: 000000003ee4e000 - 000000003fea2000 (usable)
> BIOS-e820: 000000003fea2000 - 000000003fee9000 (ACPI NVS)
> BIOS-e820: 000000003fee9000 - 000000003feed000 (usable)
> BIOS-e820: 000000003feed000 - 000000003feff000 (ACPI data)
> BIOS-e820: 000000003feff000 - 000000003ff00000 (usable)
> KERNEL supported cpus:
> Intel GenuineIntel
> AMD AuthenticAMD
> Centaur CentaurHauls
> console [earlyvga0] enabled
> debug: ignoring loglevel setting.
> last_pfn = 0x3ff00 max_arch_pfn = 0x3ffffffff
> init_memory_mapping
> 0000000000 - 003fe00000 page 2M
> 003fe00000 - 003ff00000 page 4k
> kernel direct mapping tables up to 3ff00000 @ 8000-b000
> last_map_addr: 3ff00000 end: 3ff00000
> ACPI: RSDP 000FE020, 0014 (r0 INTEL )
> ACPI: RSDT 3FEFDE48, 0050 (r1 INTEL D975XBX 4B9 MSFT 1000013)
> ACPI: FACP 3FEFCF10, 0074 (r1 INTEL D975XBX 4B9 MSFT 1000013)
> ACPI: DSDT 3FEF8010, 3E70 (r1 INTEL D975XBX 4B9 MSFT 1000013)
> ACPI: FACS 3FEDFC40, 0040
> ACPI: APIC 3FEFCE10, 0078 (r1 INTEL D975XBX 4B9 MSFT 1000013)
> ACPI: WDDT 3FEF7F90, 0040 (r1 INTEL D975XBX 4B9 MSFT 1000013)
> ACPI: MCFG 3FEF7F10, 003C (r1 INTEL D975XBX 4B9 MSFT 1000013)
> ACPI: ASF! 3FEFCD10, 00A6 (r32 INTEL D975XBX 4B9 MSFT 1000013)
> ACPI: HPET 3FEF7E90, 0038 (r1 INTEL D975XBX 4B9 MSFT 1000013)
> ACPI: SSDT 3FEFDC10, 01BC (r1 INTEL CpuPm 4B9 MSFT 1000013)
> ACPI: SSDT 3FEFDA10, 01B7 (r1 INTEL Cpu0Ist 4B9 MSFT 1000013)
> ACPI: SSDT 3FEFD810, 01B7 (r1 INTEL Cpu1Ist 4B9 MSFT 1000013)
> ACPI: SSDT 3FEFD610, 01B7 (r1 INTEL Cpu2Ist 4B9 MSFT 1000013)
> ACPI: SSDT 3FEFD410, 01B7 (r1 INTEL Cpu3Ist 4B9 MSFT 1000013)
> Entering add_active_range(0, 0x0, 0x9f) 0 entries of 25600 used
> Entering add_active_range(0, 0x100, 0x3ed94) 1 entries of 25600 used
> Entering add_active_range(0, 0x3ee4e, 0x3fea2) 2 entries of 25600 used
> Entering add_active_range(0, 0x3fee9, 0x3feed) 3 entries of 25600 used
> Entering add_active_range(0, 0x3feff, 0x3ff00) 4 entries of 25600 used
> (5 early reservations) ==> bootmem
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> #2 [0000200000 - 0001484b34] TEXT DATA BSS ==> [0000200000 - 0001484b34]
> #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
> #4 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
> Zone PFN ranges:
> DMA 0x00000000 -> 0x00001000
> DMA32 0x00001000 -> 0x00100000
> Normal 0x00100000 -> 0x00100000
> Movable zone start PFN for each node
> early_node_map[5] active PFN ranges
> 0: 0x00000000 -> 0x0000009f
> 0: 0x00000100 -> 0x0003ed94
> 0: 0x0003ee4e -> 0x0003fea2
> 0: 0x0003fee9 -> 0x0003feed
> 0: 0x0003feff -> 0x0003ff00
> On node 0 totalpages: 261516
> DMA zone: 56 pages used for memmap
> DMA zone: 100 pages reserved
> DMA zone: 3843 pages, LIFO batch:0
> DMA32 zone: 3525 pages used for memmap
> DMA32 zone: 253992 pages, LIFO batch:31
> Normal zone: 0 pages used for memmap
> Movable zone: 0 pages used for memmap
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
> ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> SMP: Allowing 4 CPUs, 2 hotplug CPUs
> mapped APIC to ffffffffff5fc000 ( fee00000)
> mapped IOAPIC to ffffffffff5fb000 (00000000fec00000)
> Allocating PCI resources starting at 40000000 (gap: 3ff00000:c0100000)
> PERCPU: Allocating 40256 bytes of per cpu data
> NR_CPUS: 4096, nr_cpu_ids: 4, nr_node_ids 512
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257835
> Kernel command line: root=/dev/sda1 earlyprintk=vga console=ttyS0,115200 console=tty 5 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled pci=nomsi
> kernel profiling enabled (shift: 0)
> debug: sysrq always enabled.
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> TSC calibrated against PIT
> Detected 2933.406 MHz processor.
> Console: colour VGA+ 80x25
> console handover: boot [earlyvga0] -> real [tty0]
> console [ttyS0] enabled
> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
> Checking aperture...
> No AGP bridge found
> Memory: 978020k/1047552k available (8071k kernel code, 67476k reserved, 6822k data, 540k init)
> CPA: page pool initialized 1 of 1 pages preallocated
> hpet clockevent registered
> Calibrating delay loop (skipped), value calculated using timer frequency.. <6>5866.81 BogoMIPS (lpj=11733624)
> Security Framework initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> Mount-cache hash table entries: 256
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 4096K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> CPU0: Thermal monitoring enabled (TM2)
> using mwait in idle threads.
> ACPI: Core revision 20080609
> enabled ExtINT on CPU#0
> ENABLING IO-APIC IRQs
> init IO_APIC IRQs
> IO-APIC (apicid-pin) 2-0 not connected.
> IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0)
> IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
> IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> CPU0: Intel(R) Core(TM)2 CPU E6800 @ 2.93GHz stepping 05
> Using local APIC timer interrupts.
> APIC timer calibration result 16667083
> Detected 16.667 MHz APIC timer.
> Booting processor 1/1 ip 6000
> Initializing CPU#1
> masked ExtINT on CPU#1
> Calibrating delay using timer specific routine.. <6>5866.88 BogoMIPS (lpj=11733771)
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 4096K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> CPU1: Thermal monitoring enabled (TM2)
> CPU1: Intel(R) Core(TM)2 CPU E6800 @ 2.93GHz stepping 05
> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> Brought up 2 CPUs
> Total of 2 processors activated (11733.69 BogoMIPS).
> calling init_cpufreq_transition_notifier_list+0x0/0x1b
> initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 msecs
> calling net_ns_init+0x0/0x133
> net_namespace: 1120 bytes
> initcall net_ns_init+0x0/0x133 returned 0 after 0 msecs
> calling cpufreq_tsc+0x0/0x16
> initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs
> calling init_smp_flush+0x0/0x51
> initcall init_smp_flush+0x0/0x51 returned 0 after 0 msecs
> calling print_banner+0x0/0xf
> Booting paravirtualized kernel on bare hardware
> initcall print_banner+0x0/0xf returned 0 after 3 msecs
> calling sysctl_init+0x0/0x32
> initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs
> calling ksysfs_init+0x0/0xb9
> initcall ksysfs_init+0x0/0xb9 returned 0 after 0 msecs
> calling init_jiffies_clocksource+0x0/0xc
> initcall init_jiffies_clocksource+0x0/0xc returned 0 after 0 msecs
> calling pm_init+0x0/0x35
> initcall pm_init+0x0/0x35 returned 0 after 0 msecs
> calling filelock_init+0x0/0x2e
> initcall filelock_init+0x0/0x2e returned 0 after 0 msecs
> calling init_script_binfmt+0x0/0xc
> initcall init_script_binfmt+0x0/0xc returned 0 after 0 msecs
> calling init_elf_binfmt+0x0/0xc
> initcall init_elf_binfmt+0x0/0xc returned 0 after 0 msecs
> calling init_compat_elf_binfmt+0x0/0xc
> initcall init_compat_elf_binfmt+0x0/0xc returned 0 after 0 msecs
> calling debugfs_init+0x0/0x47
> initcall debugfs_init+0x0/0x47 returned 0 after 0 msecs
> calling securityfs_init+0x0/0x47
> initcall securityfs_init+0x0/0x47 returned 0 after 0 msecs
> calling random32_init+0x0/0x5f
> initcall random32_init+0x0/0x5f returned 0 after 0 msecs
> calling cpufreq_core_init+0x0/0x84
> initcall cpufreq_core_init+0x0/0x84 returned 0 after 0 msecs
> calling cpuidle_init+0x0/0x36
> initcall cpuidle_init+0x0/0x36 returned 0 after 0 msecs
> calling virtio_init+0x0/0x26
> initcall virtio_init+0x0/0x26 returned 0 after 0 msecs
> calling sock_init+0x0/0x5e
> initcall sock_init+0x0/0x5e returned 0 after 0 msecs
> calling netpoll_init+0x0/0x2c
> initcall netpoll_init+0x0/0x2c returned 0 after 0 msecs
> calling netlink_proto_init+0x0/0x13e
> NET: Registered protocol family 16
> initcall netlink_proto_init+0x0/0x13e returned 0 after 3 msecs
> calling bdi_class_init+0x0/0x3d
> initcall bdi_class_init+0x0/0x3d returned 0 after 0 msecs
> calling kobject_uevent_init+0x0/0x45
> initcall kobject_uevent_init+0x0/0x45 returned 0 after 0 msecs
> calling pcibus_class_init+0x0/0xc
> initcall pcibus_class_init+0x0/0xc returned 0 after 0 msecs
> calling pci_driver_init+0x0/0xc
> initcall pci_driver_init+0x0/0xc returned 0 after 0 msecs
> calling lcd_class_init+0x0/0x49
> initcall lcd_class_init+0x0/0x49 returned 0 after 0 msecs
> calling backlight_class_init+0x0/0x4a
> initcall backlight_class_init+0x0/0x4a returned 0 after 0 msecs
> calling dock_init+0x0/0x5c
> No dock devices found.
> initcall dock_init+0x0/0x5c returned 0 after 0 msecs
> calling tty_class_init+0x0/0x2a
> initcall tty_class_init+0x0/0x2a returned 0 after 0 msecs
> calling vtconsole_class_init+0x0/0xaf
> initcall vtconsole_class_init+0x0/0xaf returned 0 after 0 msecs
> calling enable_pci_io_ecs+0x0/0x2e
> initcall enable_pci_io_ecs+0x0/0x2e returned 0 after 0 msecs
> calling early_fill_mp_bus_info+0x0/0x763
> initcall early_fill_mp_bus_info+0x0/0x763 returned 0 after 0 msecs
> calling arch_kdebugfs_init+0x0/0x3
> initcall arch_kdebugfs_init+0x0/0x3 returned 0 after 0 msecs
> calling ffh_cstate_init+0x0/0x31
> initcall ffh_cstate_init+0x0/0x31 returned 0 after 0 msecs
> calling acpi_pci_init+0x0/0x3b
> ACPI: bus type pci registered
> initcall acpi_pci_init+0x0/0x3b returned 0 after 0 msecs
> calling init_acpi_device_notify+0x0/0x4b
> initcall init_acpi_device_notify+0x0/0x4b returned 0 after 0 msecs
> calling pci_arch_init+0x0/0x44
> PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
> PCI: Not using MMCONFIG.
> PCI: Using configuration type 1 for base access
> initcall pci_arch_init+0x0/0x44 returned 0 after 11 msecs
> calling topology_init+0x0/0x31
> initcall topology_init+0x0/0x31 returned 0 after 0 msecs
> calling param_sysfs_init+0x0/0x1c1
> initcall param_sysfs_init+0x0/0x1c1 returned 0 after 11 msecs
> calling pm_sysrq_init+0x0/0x19
> initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 msecs
> calling readahead_init+0x0/0x2e
> initcall readahead_init+0x0/0x2e returned 0 after 3 msecs
> calling init_bio+0x0/0xc0
> initcall init_bio+0x0/0xc0 returned 0 after 0 msecs
> calling integrity_init+0x0/0x35
> initcall integrity_init+0x0/0x35 returned 0 after 0 msecs
> calling blk_settings_init+0x0/0x25
> initcall blk_settings_init+0x0/0x25 returned 0 after 0 msecs
> calling blk_ioc_init+0x0/0x2a
> initcall blk_ioc_init+0x0/0x2a returned 0 after 0 msecs
> calling genhd_device_init+0x0/0x36
> initcall genhd_device_init+0x0/0x36 returned 0 after 0 msecs
> calling blk_dev_integrity_init+0x0/0x2a
> initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 msecs
> calling pci_slot_init+0x0/0x45
> initcall pci_slot_init+0x0/0x45 returned 0 after 0 msecs
> calling acpi_init+0x0/0x21b
> ACPI: EC: Look up EC in DSDT
> ACPI: Interpreter enabled
> ACPI: (supports S0 S5)
> ACPI: Using IOAPIC for interrupt routing
> PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
> PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources
> PCI: Not using MMCONFIG.
> initcall acpi_init+0x0/0x21b returned 0 after 26 msecs
> calling acpi_scan_init+0x0/0x113
> initcall acpi_scan_init+0x0/0x113 returned 0 after 3 msecs
> calling acpi_ec_init+0x0/0x61
> initcall acpi_ec_init+0x0/0x61 returned 0 after 0 msecs
> calling acpi_pci_root_init+0x0/0x28
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:01.0: PME# disabled
> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1b.0: PME# disabled
> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.0: PME# disabled
> pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.4: PME# disabled
> pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.5: PME# disabled
> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1d.7: PME# disabled
> pci 0000:00:1f.2: PME# supported from D3hot
> pci 0000:00:1f.2: PME# disabled
> pci 0000:01:00.0: supports D1
> pci 0000:01:00.0: supports D2
> pci 0000:01:00.1: supports D1
> pci 0000:01:00.1: supports D2
> pci 0000:02:00.0: supports D1
> pci 0000:02:00.0: supports D2
> pci 0000:02:00.0: PME# supported from D0 D1 D2
> pci 0000:02:00.0: PME# disabled
> pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
> pci 0000:04:00.0: PME# disabled
> pci 0000:05:04.0: supports D1
> pci 0000:05:04.0: supports D2
> pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot
> pci 0000:05:04.0: PME# disabled
> pci 0000:05:05.0: supports D1
> pci 0000:05:05.0: supports D2
> pci 0000:00:1e.0: transparent bridge
> bus 00 -> node 0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
> initcall acpi_pci_root_init+0x0/0x28 returned 0 after 110 msecs
> calling acpi_pci_link_init+0x0/0x48
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
> initcall acpi_pci_link_init+0x0/0x48 returned 0 after 49 msecs
> calling acpi_power_init+0x0/0x77
> initcall acpi_power_init+0x0/0x77 returned 0 after 0 msecs
> calling acpi_system_init+0x0/0x264
> initcall acpi_system_init+0x0/0x264 returned 0 after 0 msecs
> calling pnp_init+0x0/0x1f
> Linux Plug and Play Support v0.97 (c) Adam Belay
> initcall pnp_init+0x0/0x1f returned 0 after 3 msecs
> calling pnpacpi_init+0x0/0x8c
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
> pnp: PnP ACPI: found 13 devices
> ACPI: ACPI bus type pnp unregistered
> initcall pnpacpi_init+0x0/0x8c returned 0 after 38 msecs
> calling misc_init+0x0/0x8e
> initcall misc_init+0x0/0x8e returned 0 after 0 msecs
> calling cn_init+0x0/0xee
> initcall cn_init+0x0/0xee returned 0 after 0 msecs
> calling tifm_init+0x0/0x6d
> initcall tifm_init+0x0/0x6d returned 0 after 0 msecs
> calling phy_init+0x0/0x27
> initcall phy_init+0x0/0x27 returned 0 after 0 msecs
> calling init_dvbdev+0x0/0xaf
> initcall init_dvbdev+0x0/0xaf returned 0 after 0 msecs
> calling init_scsi+0x0/0x72
> SCSI subsystem initialized
> initcall init_scsi+0x0/0x72 returned 0 after 3 msecs
> calling ata_init+0x0/0x32a
> libata version 3.00 loaded.
> initcall ata_init+0x0/0x32a returned 0 after 3 msecs
> calling spi_init+0x0/0x73
> initcall spi_init+0x0/0x73 returned 0 after 0 msecs
> calling init_pcmcia_cs+0x0/0x27
> initcall init_pcmcia_cs+0x0/0x27 returned 0 after 0 msecs
> calling usb_init+0x0/0x104
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> initcall usb_init+0x0/0x104 returned 0 after 11 msecs
> calling serio_init+0x0/0x8b
> initcall serio_init+0x0/0x8b returned 0 after 0 msecs
> calling gameport_init+0x0/0x8b
> initcall gameport_init+0x0/0x8b returned 0 after 0 msecs
> calling input_init+0x0/0xfc
> initcall input_init+0x0/0xfc returned 0 after 0 msecs
> calling i2c_init+0x0/0x55
> initcall i2c_init+0x0/0x55 returned 0 after 0 msecs
> calling power_supply_class_init+0x0/0x34
> initcall power_supply_class_init+0x0/0x34 returned 0 after 0 msecs
> calling thermal_init+0x0/0x2f
> initcall thermal_init+0x0/0x2f returned 0 after 0 msecs
> calling mmc_init+0x0/0x65
> initcall mmc_init+0x0/0x65 returned 0 after 0 msecs
> calling leds_init+0x0/0x2a
> initcall leds_init+0x0/0x2a returned 0 after 0 msecs
> calling dma_bus_init+0x0/0x2b
> initcall dma_bus_init+0x0/0x2b returned 0 after 0 msecs
> calling ac97_bus_init+0x0/0xc
> initcall ac97_bus_init+0x0/0xc returned 0 after 0 msecs
> calling pci_subsys_init+0x0/0x116
> PCI: Using ACPI for IRQ routing
> number of MP IRQ sources: 15.
> number of IO-APIC #2 registers: 24.
> testing the IO APIC.......................
>
> IO APIC #2......
> .... register #00: 00000000
> ....... : physical APIC id: 00
> .... register #01: 00170020
> ....... : max redirection entries: 0017
> ....... : PRQ implemented: 0
> ....... : IO APIC version: 0020
> .... register #02: 00170020
> ....... : arbitration: 00
> .... IRQ redirection table:
> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
> 00 000 1 0 0 0 0 0 0 00
> 01 003 0 0 0 0 0 1 1 31
> 02 003 0 0 0 0 0 1 1 30
> 03 003 0 0 0 0 0 1 1 33
> 04 003 0 0 0 0 0 1 1 34
> 05 003 0 0 0 0 0 1 1 35
> 06 003 0 0 0 0 0 1 1 36
> 07 003 0 0 0 0 0 1 1 37
> 08 003 0 0 0 0 0 1 1 38
> 09 003 0 1 0 0 0 1 1 39
> 0a 003 0 0 0 0 0 1 1 3A
> 0b 003 0 0 0 0 0 1 1 3B
> 0c 003 0 0 0 0 0 1 1 3C
> 0d 003 0 0 0 0 0 1 1 3D
> 0e 003 0 0 0 0 0 1 1 3E
> 0f 003 0 0 0 0 0 1 1 3F
> 10 000 1 0 0 0 0 0 0 00
> 11 000 1 0 0 0 0 0 0 00
> 12 000 1 0 0 0 0 0 0 00
> 13 000 1 0 0 0 0 0 0 00
> 14 000 1 0 0 0 0 0 0 00
> 15 000 1 0 0 0 0 0 0 00
> 16 000 1 0 0 0 0 0 0 00
> 17 000 1 0 0 0 0 0 0 00
> IRQ to pin mappings:
> IRQ0 -> 0:2
> IRQ1 -> 0:1
> IRQ3 -> 0:3
> IRQ4 -> 0:4
> IRQ5 -> 0:5
> IRQ6 -> 0:6
> IRQ7 -> 0:7
> IRQ8 -> 0:8
> IRQ9 -> 0:9
> IRQ10 -> 0:10
> IRQ11 -> 0:11
> IRQ12 -> 0:12
> IRQ13 -> 0:13
> IRQ14 -> 0:14
> IRQ15 -> 0:15
> .................................... done.
> initcall pci_subsys_init+0x0/0x116 returned 0 after 164 msecs
> calling proto_init+0x0/0x2e
> initcall proto_init+0x0/0x2e returned 0 after 0 msecs
> calling net_dev_init+0x0/0x158
> initcall net_dev_init+0x0/0x158 returned 0 after 0 msecs
> calling neigh_init+0x0/0x71
> initcall neigh_init+0x0/0x71 returned 0 after 0 msecs
> calling fib_rules_init+0x0/0x9c
> initcall fib_rules_init+0x0/0x9c returned 0 after 0 msecs
> calling genl_init+0x0/0xce
> initcall genl_init+0x0/0xce returned 0 after 15 msecs
> calling cipso_v4_init+0x0/0x67
> initcall cipso_v4_init+0x0/0x67 returned 0 after 0 msecs
> calling wireless_nlevent_init+0x0/0x2c
> initcall wireless_nlevent_init+0x0/0x2c returned 0 after 0 msecs
> calling cfg80211_init+0x0/0x55
> initcall cfg80211_init+0x0/0x55 returned 0 after 11 msecs
> calling ieee80211_init+0x0/0xd
> initcall ieee80211_init+0x0/0xd returned 0 after 0 msecs
> calling netlbl_init+0x0/0x83
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> initcall netlbl_init+0x0/0x83 returned 0 after 11 msecs
> calling sysctl_init+0x0/0x2f
> initcall sysctl_init+0x0/0x2f returned 0 after 0 msecs
> calling pci_iommu_init+0x0/0x12
> PCI-GART: No AMD northbridge found.
> initcall pci_iommu_init+0x0/0x12 returned 0 after 3 msecs
> calling hpet_late_init+0x0/0xfc
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> hpet0: 3 64-bit timers, 14318180 Hz
> initcall hpet_late_init+0x0/0xfc returned 0 after 7 msecs
> calling clocksource_done_booting+0x0/0xd
> initcall clocksource_done_booting+0x0/0xd<7>Switched to high resolution mode on CPU 0
> Switched to high resolution mode on CPU 1
> returned 0 after 0 msecs
> calling tracer_alloc_buffers+0x0/0x4ec
> tracer: 1286 pages allocated for 65536 entries of 80 bytes
> actual entries 65586
> initcall tracer_alloc_buffers+0x0/0x4ec returned 0 after 8 msecs
> calling init_pipe_fs+0x0/0x42
> initcall init_pipe_fs+0x0/0x42 returned 0 after 0 msecs
> calling init_mnt_writers+0x0/0x58
> initcall init_mnt_writers+0x0/0x58 returned 0 after 0 msecs
> calling anon_inode_init+0x0/0x10b
> initcall anon_inode_init+0x0/0x10b returned 0 after 0 msecs
> calling acpi_event_init+0x0/0x52
> initcall acpi_event_init+0x0/0x52 returned 0 after 10 msecs
> calling pnp_system_init+0x0/0xc
> system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
> system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
> system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
> system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
> system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
> system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
> system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
> system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
> system 00:01: iomem range 0xc0000-0xdffff has been reserved
> system 00:01: iomem range 0xe0000-0xfffff could not be reserved
> system 00:06: ioport range 0x500-0x53f has been reserved
> system 00:06: ioport range 0x400-0x47f has been reserved
> system 00:06: ioport range 0x680-0x6ff has been reserved
> initcall pnp_system_init+0x0/0xc returned 0 after 70 msecs
> calling chr_dev_init+0x0/0x9a
> initcall chr_dev_init+0x0/0x9a returned 0 after 0 msecs
> calling firmware_class_init+0x0/0x68
> initcall firmware_class_init+0x0/0x68 returned 0 after 0 msecs
> calling loopback_init+0x0/0xc
> initcall loopback_init+0x0/0xc returned 0 after 0 msecs
> calling cpufreq_gov_performance_init+0x0/0xc
> initcall cpufreq_gov_performance_init+0x0/0xc returned 0 after 0 msecs
> calling cpufreq_gov_dbs_init+0x0/0x47
> initcall cpufreq_gov_dbs_init+0x0/0x47 returned 0 after 0 msecs
> calling ssb_modinit+0x0/0x4b
> initcall ssb_modinit+0x0/0x4b returned 0 after 0 msecs
> calling pcibios_assign_resources+0x0/0x86
> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
> pci 0000:00:01.0: IO window: 0x3000-0x3fff
> pci 0000:00:01.0: MEM window: 0x50300000-0x503fffff
> pci 0000:00:01.0: PREFETCH window: 0x00000040000000-0x0000004fffffff
> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
> pci 0000:00:1c.0: IO window: disabled
> pci 0000:00:1c.0: MEM window: 0x50200000-0x502fffff
> pci 0000:00:1c.0: PREFETCH window: disabled
> pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
> pci 0000:00:1c.4: IO window: disabled
> pci 0000:00:1c.4: MEM window: disabled
> pci 0000:00:1c.4: PREFETCH window: disabled
> pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
> pci 0000:00:1c.5: IO window: 0x2000-0x2fff
> pci 0000:00:1c.5: MEM window: 0x50100000-0x501fffff
> pci 0000:00:1c.5: PREFETCH window: disabled
> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
> pci 0000:00:1e.0: IO window: 0x1000-0x1fff
> pci 0000:00:1e.0: MEM window: 0x50000000-0x500fffff
> pci 0000:00:1e.0: PREFETCH window: disabled
> IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1)
> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> IOAPIC[0]: Set routing entry (2-17 -> 0x51 -> IRQ 17 Mode:1 Active:1)
> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:1c.4 to 64
> pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1c.5 to 64
> PCI: Setting latency timer of device 0000:00:1e.0 to 64
> initcall pcibios_assign_resources+0x0/0x86 returned 0 after 147 msecs
> calling inet_init+0x0/0x1df
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> initcall inet_init+0x0/0x1df returned 0 after 75 msecs
> calling af_unix_init+0x0/0x4b
> NET: Registered protocol family 1
> initcall af_unix_init+0x0/0x4b returned 0 after 3 msecs
> calling default_rootfs+0x0/0x61
> initcall default_rootfs+0x0/0x61 returned 0 after 0 msecs
> calling i8259A_init_sysfs+0x0/0x23
> initcall i8259A_init_sysfs+0x0/0x23 returned 0 after 0 msecs
> calling vsyscall_init+0x0/0x6c
> initcall vsyscall_init+0x0/0x6c returned 0 after 0 msecs
> calling sbf_init+0x0/0xd5
> initcall sbf_init+0x0/0xd5 returned 0 after 0 msecs
> calling i8237A_init_sysfs+0x0/0x23
> initcall i8237A_init_sysfs+0x0/0x23 returned 0 after 0 msecs
> calling add_rtc_cmos+0x0/0x1d
> initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs
> calling cache_sysfs_init+0x0/0x55
> initcall cache_sysfs_init+0x0/0x55 returned 0 after 0 msecs
> calling mce_init_device+0x0/0x7f
> initcall mce_init_device+0x0/0x7f returned 0 after 0 msecs
> calling periodic_mcheck_init+0x0/0x3f
> initcall periodic_mcheck_init+0x0/0x3f returned 0 after 0 msecs
> calling thermal_throttle_init_device+0x0/0x7b
> initcall thermal_throttle_init_device+0x0/0x7b returned 0 after 0 msecs
> calling microcode_init+0x0/0xaf
> IA-32 Microcode Update Driver: v1.14a <tigran@...azian.fsnet.co.uk>
> initcall microcode_init+0x0/0xaf returned 0 after 5 msecs
> calling init_lapic_sysfs+0x0/0x2f
> initcall init_lapic_sysfs+0x0/0x2f returned 0 after 0 msecs
> calling ioapic_init_sysfs+0x0/0x99
> initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 0 msecs
> calling uv_ptc_init+0x0/0x75
> initcall uv_ptc_init+0x0/0x75 returned 0 after 0 msecs
> calling uv_bau_init+0x0/0x5d0
> initcall uv_bau_init+0x0/0x5d0 returned 0 after 0 msecs
> calling audit_classes_init+0x0/0xaf
> initcall audit_classes_init+0x0/0xaf returned 0 after 0 msecs
> calling aes_init+0x0/0xc
> initcall aes_init+0x0/0xc returned 0 after 0 msecs
> calling init+0x0/0xc
> initcall init+0x0/0xc returned 0 after 0 msecs
> calling init_vdso_vars+0x0/0x224
> initcall init_vdso_vars+0x0/0x224 returned 0 after 0 msecs
> calling ia32_binfmt_init+0x0/0x14
> initcall ia32_binfmt_init+0x0/0x14 returned 0 after 0 msecs
> calling sysenter_setup+0x0/0x2ac
> initcall sysenter_setup+0x0/0x2ac returned 0 after 0 msecs
> calling init_aout_binfmt+0x0/0xc
> initcall init_aout_binfmt+0x0/0xc returned 0 after 0 msecs
> calling create_proc_profile+0x0/0x319
> initcall create_proc_profile+0x0/0x319 returned 0 after 0 msecs
> calling ioresources_init+0x0/0x3c
> initcall ioresources_init+0x0/0x3c returned 0 after 0 msecs
> calling uid_cache_init+0x0/0x6f
> initcall uid_cache_init+0x0/0x6f returned 0 after 0 msecs
> calling init_posix_timers+0x0/0xa6
> initcall init_posix_timers+0x0/0xa6 returned 0 after 0 msecs
> calling init_posix_cpu_timers+0x0/0xc6
> initcall init_posix_cpu_timers+0x0/0xc6 returned 0 after 0 msecs
> calling nsproxy_cache_init+0x0/0x2d
> initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 msecs
> calling timekeeping_init_device+0x0/0x23
> initcall timekeeping_init_device+0x0/0x23 returned 0 after 0 msecs
> calling init_clocksource_sysfs+0x0/0x51
> initcall init_clocksource_sysfs+0x0/0x51 returned 0 after 0 msecs
> calling init_timer_list_procfs+0x0/0x2c
> initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 msecs
> calling futex_init+0x0/0x67
> initcall futex_init+0x0/0x67 returned 0 after 0 msecs
> calling proc_dma_init+0x0/0x22
> initcall proc_dma_init+0x0/0x22 returned 0 after 0 msecs
> calling kallsyms_init+0x0/0x25
> initcall kallsyms_init+0x0/0x25 returned 0 after 0 msecs
> calling pid_namespaces_init+0x0/0x2d
> initcall pid_namespaces_init+0x0/0x2d returned 0 after 0 msecs
> calling audit_init+0x0/0x126
> audit: initializing netlink socket (disabled)
> type=2000 audit(1216650963.392:1): initialized
> initcall audit_init+0x0/0x126 returned 0 after 8 msecs
> calling relay_init+0x0/0x14
> initcall relay_init+0x0/0x14 returned 0 after 0 msecs
> calling utsname_sysctl_init+0x0/0x14
> initcall utsname_sysctl_init+0x0/0x14 returned 0 after 0 msecs
> calling init_stack_trace+0x0/0xc
> Testing tracer sysprof: PASSED
> initcall init_stack_trace+0x0/0xc returned 0 after 98 msecs
> calling init_per_zone_pages_min+0x0/0x45
> initcall init_per_zone_pages_min+0x0/0x45 returned 0 after 0 msecs
> calling pdflush_init+0x0/0x13
> initcall pdflush_init+0x0/0x13 returned 0 after 0 msecs
> calling kswapd_init+0x0/0x5e
> initcall kswapd_init+0x0/0x5e returned 0 after 0 msecs
> calling setup_vmstat+0x0/0x42
> initcall setup_vmstat+0x0/0x42 returned 0 after 0 msecs
> calling init_tmpfs+0x0/0x3d
> initcall init_tmpfs+0x0/0x3d returned 0 after 0 msecs
> calling fasync_init+0x0/0x2a
> initcall fasync_init+0x0/0x2a returned 0 after 0 msecs
> calling aio_setup+0x0/0x6e
> initcall aio_setup+0x0/0x6e returned 0 after 0 msecs
> calling inotify_setup+0x0/0xd
> initcall inotify_setup+0x0/0xd returned 0 after 0 msecs
> calling inotify_user_setup+0x0/0xb8
> initcall inotify_user_setup+0x0/0xb8 returned 0 after 0 msecs
> calling init_sys32_ioctl+0x0/0x85
> initcall init_sys32_ioctl+0x0/0x85 returned 0 after 0 msecs
> calling init_mbcache+0x0/0x14
> initcall init_mbcache+0x0/0x14 returned 0 after 0 msecs
> calling dquot_init+0x0/0xde
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> initcall dquot_init+0x0/0xde returned 0 after 7 msecs
> calling init_v2_quota_format+0x0/0xc
> initcall init_v2_quota_format+0x0/0xc returned 0 after 0 msecs
> calling dnotify_init+0x0/0x2a
> initcall dnotify_init+0x0/0x2a returned 0 after 0 msecs
> calling configfs_init+0x0/0xa9
> initcall configfs_init+0x0/0xa9 returned 0 after 0 msecs
> calling init_devpts_fs+0x0/0x35
> initcall init_devpts_fs+0x0/0x35 returned 0 after 0 msecs
> calling init_ext3_fs+0x0/0x60
> initcall init_ext3_fs+0x0/0x60 returned 0 after 0 msecs
> calling journal_init+0x0/0xc5
> initcall journal_init+0x0/0xc5 returned 0 after 0 msecs
> calling init_ext2_fs+0x0/0x60
> initcall init_ext2_fs+0x0/0x60 returned 0 after 0 msecs
> calling init_ramfs_fs+0x0/0xc
> initcall init_ramfs_fs+0x0/0xc returned 0 after 0 msecs
> calling init_fat_fs+0x0/0x45
> initcall init_fat_fs+0x0/0x45 returned 0 after 0 msecs
> calling init_msdos_fs+0x0/0xc
> initcall init_msdos_fs+0x0/0xc returned 0 after 0 msecs
> calling init_vfat_fs+0x0/0xc
> initcall init_vfat_fs+0x0/0xc returned 0 after 0 msecs
> calling init_iso9660_fs+0x0/0x50
> initcall init_iso9660_fs+0x0/0x50 returned 0 after 0 msecs
> calling init_hfsplus_fs+0x0/0x53
> initcall init_hfsplus_fs+0x0/0x53 returned 0 after 0 msecs
> calling init_hfs_fs+0x0/0x53
> initcall init_hfs_fs+0x0/0x53 returned 0 after 0 msecs
> calling vxfs_init+0x0/0x4f
> initcall vxfs_init+0x0/0x4f returned 0 after 0 msecs
> calling init_nls_cp437+0x0/0xc
> initcall init_nls_cp437+0x0/0xc returned 0 after 0 msecs
> calling init_nls_cp775+0x0/0xc
> initcall init_nls_cp775+0x0/0xc returned 0 after 0 msecs
> calling init_nls_cp850+0x0/0xc
> initcall init_nls_cp850+0x0/0xc returned 0 after 0 msecs
> calling init_nls_cp852+0x0/0xc
> initcall init_nls_cp852+0x0/0xc returned 0 after 0 msecs
> calling init_nls_cp855+0x0/0xc
> initcall init_nls_cp855+0x0/0xc returned 0 after 0 msecs
> calling init_nls_cp857+0x0/0xc
> initcall init_nls_cp857+0x0/0xc returned 0 after 0 msecs
> calling init_nls_cp860+0x0/0xc
> initcall init_nls_cp860+0x0/0xc returned 0 after 0 msecs
> calling init_nls_cp863+0x0/0xc
> initcall init_nls_cp863+0x0/0xc returned 0 after 0 msecs
> calling init_nls_cp874+0x0/0xc
> initcall init_nls_cp874+0x0/0xc returned 0 after 0 msecs
> calling init_nls_cp932+0x0/0xc
> initcall init_nls_cp932+0x0/0xc returned 0 after 0 msecs
> calling init_nls_euc_jp+0x0/0x4a
> initcall init_nls_euc_jp+0x0/0x4a returned 0 after 0 msecs
> calling init_nls_cp936+0x0/0xc
> initcall init_nls_cp936+0x0/0xc returned 0 after 0 msecs
> calling init_nls_ascii+0x0/0xc
> initcall init_nls_ascii+0x0/0xc returned 0 after 0 msecs
> calling init_nls_iso8859_1+0x0/0xc
> initcall init_nls_iso8859_1+0x0/0xc returned 0 after 0 msecs
> calling init_nls_iso8859_5+0x0/0xc
> initcall init_nls_iso8859_5+0x0/0xc returned 0 after 0 msecs
> calling init_nls_iso8859_13+0x0/0xc
> initcall init_nls_iso8859_13+0x0/0xc returned 0 after 0 msecs
> calling init_nls_iso8859_14+0x0/0xc
> initcall init_nls_iso8859_14+0x0/0xc returned 0 after 0 msecs
> calling init_nls_koi8_r+0x0/0xc
> initcall init_nls_koi8_r+0x0/0xc returned 0 after 0 msecs
> calling init_nls_utf8+0x0/0x1f
> initcall init_nls_utf8+0x0/0x1f returned 0 after 0 msecs
> calling init_sysv_fs+0x0/0x45
> initcall init_sysv_fs+0x0/0x45 returned 0 after 0 msecs
> calling init_hpfs_fs+0x0/0x50
> initcall init_hpfs_fs+0x0/0x50 returned 0 after 0 msecs
> calling init_ntfs_fs+0x0/0x1c7
> NTFS driver 2.1.29 [Flags: R/O].
> initcall init_ntfs_fs+0x0/0x1c7 returned 0 after 2 msecs
> calling init_qnx4_fs+0x0/0x62
> QNX4 filesystem 0.2.3 registered.
> initcall init_qnx4_fs+0x0/0x62 returned 0 after 3 msecs
> calling init_adfs_fs+0x0/0x50
> initcall init_adfs_fs+0x0/0x50 returned 0 after 0 msecs
> calling fuse_init+0x0/0x11b
> fuse init (API version 7.9)
> initcall fuse_init+0x0/0x11b returned 0 after 2 msecs
> calling init_jfs_fs+0x0/0x1db
> JFS: nTxBlock = 7645, nTxLock = 61161
> initcall init_jfs_fs+0x0/0x1db returned 0 after 8 msecs
> calling init_befs_fs+0x0/0x71
> BeFS version: 0.9.3
> initcall init_befs_fs+0x0/0x71 returned 0 after 1 msecs
> calling ocfs2_init+0x0/0x28b
> OCFS2 1.5.0
> initcall ocfs2_init+0x0/0x28b returned 0 after 1 msecs
> calling ocfs2_stack_glue_init+0x0/0x8b
> initcall ocfs2_stack_glue_init+0x0/0x8b returned 0 after 0 msecs
> calling init_o2nm+0x0/0x90
> OCFS2 Node Manager 1.5.0
> initcall init_o2nm+0x0/0x90 returned 0 after 2 msecs
> calling init_gfs2_fs+0x0/0x16e
> GFS2 (built Jul 21 2008 16:13:18) installed
> initcall init_gfs2_fs+0x0/0x16e returned 0 after 5 msecs
> calling init_mqueue_fs+0x0/0xbc
> initcall init_mqueue_fs+0x0/0xbc returned 0 after 0 msecs
> calling key_proc_init+0x0/0x59
> initcall key_proc_init+0x0/0x59 returned 0 after 0 msecs
> calling selinux_nf_ip_init+0x0/0x4c
> SELinux: Registering netfilter hooks
> initcall selinux_nf_ip_init+0x0/0x4c returned 0 after 3 msecs
> calling init_sel_fs+0x0/0x5e
> initcall init_sel_fs+0x0/0x5e returned 0 after 0 msecs
> calling selnl_init+0x0/0x4d
> initcall selnl_init+0x0/0x4d returned 0 after 0 msecs
> calling sel_netif_init+0x0/0x66
> initcall sel_netif_init+0x0/0x66 returned 0 after 0 msecs
> calling sel_netnode_init+0x0/0x78
> initcall sel_netnode_init+0x0/0x78 returned 0 after 0 msecs
> calling sel_netport_init+0x0/0x78
> initcall sel_netport_init+0x0/0x78 returned 0 after 0 msecs
> calling aurule_init+0x0/0x37
> initcall aurule_init+0x0/0x37 returned 0 after 0 msecs
> calling crypto_algapi_init+0x0/0xd
> initcall crypto_algapi_init+0x0/0xd returned 0 after 0 msecs
> calling blkcipher_module_init+0x0/0x20
> initcall blkcipher_module_init+0x0/0x20 returned 0 after 0 msecs
> calling seqiv_module_init+0x0/0xc
> initcall seqiv_module_init+0x0/0xc returned 0 after 0 msecs
> calling cryptomgr_init+0x0/0xc
> initcall cryptomgr_init+0x0/0xc returned 0 after 0 msecs
> calling hmac_module_init+0x0/0xc
> initcall hmac_module_init+0x0/0xc returned 0 after 0 msecs
> calling md5_mod_init+0x0/0xc
> initcall md5_mod_init+0x0/0xc returned 0 after 0 msecs
> calling rmd128_mod_init+0x0/0xc
> initcall rmd128_mod_init+0x0/0xc returned 0 after 0 msecs
> calling rmd160_mod_init+0x0/0xc
> initcall rmd160_mod_init+0x0/0xc returned 0 after 0 msecs
> calling rmd256_mod_init+0x0/0xc
> initcall rmd256_mod_init+0x0/0xc returned 0 after 0 msecs
> calling rmd320_mod_init+0x0/0xc
> initcall rmd320_mod_init+0x0/0xc returned 0 after 0 msecs
> calling sha1_generic_mod_init+0x0/0xc
> initcall sha1_generic_mod_init+0x0/0xc returned 0 after 0 msecs
> calling sha256_generic_mod_init+0x0/0x35
> initcall sha256_generic_mod_init+0x0/0x35 returned 0 after 0 msecs
> calling sha512_generic_mod_init+0x0/0x35
> initcall sha512_generic_mod_init+0x0/0x35 returned 0 after 0 msecs
> calling crypto_ecb_module_init+0x0/0xc
> initcall crypto_ecb_module_init+0x0/0xc returned 0 after 0 msecs
> calling crypto_cbc_module_init+0x0/0xc
> initcall crypto_cbc_module_init+0x0/0xc returned 0 after 0 msecs
> calling crypto_module_init+0x0/0xc
> initcall crypto_module_init+0x0/0xc returned 0 after 0 msecs
> calling crypto_ctr_module_init+0x0/0x35
> initcall crypto_ctr_module_init+0x0/0x35 returned 0 after 0 msecs
> calling crypto_ccm_module_init+0x0/0x53
> initcall crypto_ccm_module_init+0x0/0x53 returned 0 after 0 msecs
> calling cryptd_init+0x0/0xa8
> initcall cryptd_init+0x0/0xa8 returned 0 after 0 msecs
> calling des_generic_mod_init+0x0/0x35
> initcall des_generic_mod_init+0x0/0x35 returned 0 after 0 msecs
> calling fcrypt_mod_init+0x0/0xc
> initcall fcrypt_mod_init+0x0/0xc returned 0 after 0 msecs
> calling serpent_mod_init+0x0/0x35
> initcall serpent_mod_init+0x0/0x35 returned 0 after 0 msecs
> calling aes_init+0x0/0x2c5
> initcall aes_init+0x0/0x2c5 returned 0 after 0 msecs
> calling cast5_mod_init+0x0/0xc
> initcall cast5_mod_init+0x0/0xc returned 0 after 0 msecs
> calling arc4_init+0x0/0xc
> initcall arc4_init+0x0/0xc returned 0 after 0 msecs
> calling khazad_mod_init+0x0/0xc
> initcall khazad_mod_init+0x0/0xc returned 0 after 0 msecs
> calling seed_init+0x0/0xc
> initcall seed_init+0x0/0xc returned 0 after 0 msecs
> calling salsa20_generic_mod_init+0x0/0xc
> initcall salsa20_generic_mod_init+0x0/0xc returned 0 after 0 msecs
> calling deflate_mod_init+0x0/0xc
> initcall deflate_mod_init+0x0/0xc returned 0 after 0 msecs
> calling crc32c_mod_init+0x0/0x35
> initcall crc32c_mod_init+0x0/0x35 returned 0 after 0 msecs
> calling crypto_authenc_module_init+0x0/0xc
> initcall crypto_authenc_module_init+0x0/0xc returned 0 after 0 msecs
> calling bsg_init+0x0/0x11a
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
> initcall bsg_init+0x0/0x11a returned 0 after 5 msecs
> calling noop_init+0x0/0x14
> io scheduler noop registered (default)
> initcall noop_init+0x0/0x14 returned 0 after 3 msecs
> calling percpu_counter_startup+0x0/0x14
> initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs
> calling pci_init+0x0/0x2b
> pci 0000:01:00.0: Boot video device
> initcall pci_init+0x0/0x2b returned 0 after 3 msecs
> calling pci_proc_init+0x0/0x60
> initcall pci_proc_init+0x0/0x60 returned 0 after 0 msecs
> calling ltv350qv_init+0x0/0xc
> initcall ltv350qv_init+0x0/0xc returned 0 after 0 msecs
> calling corgibl_init+0x0/0xc
> initcall corgibl_init+0x0/0xc returned 0 after 0 msecs
> calling acpi_reserve_resources+0x0/0xeb
> initcall acpi_reserve_resources+0x0/0xeb returned 0 after 0 msecs
> calling acpi_ac_init+0x0/0x28
> initcall acpi_ac_init+0x0/0x28 returned 0 after 0 msecs
> calling acpi_battery_init+0x0/0x28
> initcall acpi_battery_init+0x0/0x28 returned 0 after 0 msecs
> calling acpi_button_init+0x0/0x5e
> input: Power Button (FF) as /class/input/input0
> ACPI: Power Button (FF) [PWRF]
> input: Sleep Button (CM) as /class/input/input1
> ACPI: Sleep Button (CM) [SLPB]
> initcall acpi_button_init+0x0/0x5e returned 0 after 14 msecs
> calling acpi_fan_init+0x0/0x5e
> initcall acpi_fan_init+0x0/0x5e returned 0 after 0 msecs
> calling irqrouter_init_sysfs+0x0/0x37
> initcall irqrouter_init_sysfs+0x0/0x37 returned 0 after 0 msecs
> calling acpi_processor_init+0x0/0xf6
> ACPI: ACPI0007:00 is registered as cooling_device0
> ACPI: ACPI0007:01 is registered as cooling_device1
> initcall acpi_processor_init+0x0/0xf6 returned 0 after 9 msecs
> calling acpi_container_init+0x0/0x43
> initcall acpi_container_init+0x0/0x43 returned 0 after 1 msecs
> calling toshiba_acpi_init+0x0/0x17d
> initcall toshiba_acpi_init+0x0/0x17d returned -19 after 0 msecs
> calling acpi_smb_hc_init+0x0/0x18
> initcall acpi_smb_hc_init+0x0/0x18 returned 0 after 0 msecs
> calling acpi_sbs_init+0x0/0x28
> initcall acpi_sbs_init+0x0/0x28 returned 0 after 0 msecs
> calling rand_initialize+0x0/0x2c
> initcall rand_initialize+0x0/0x2c returned 0 after 0 msecs
> calling tty_init+0x0/0x1c5
> initcall tty_init+0x0/0x1c5 returned 0 after 25 msecs
> calling pty_init+0x0/0x46e
> initcall pty_init+0x0/0x46e returned 0 after 25 msecs
> calling raw_init+0x0/0xca
> initcall raw_init+0x0/0xca returned 0 after 0 msecs
> calling r3964_init+0x0/0x3a
> r3964: Philips r3964 Driver $Revision: 1.10 $
> initcall r3964_init+0x0/0x3a returned 0 after 3 msecs
> calling applicom_init+0x0/0x4cc
> Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
> ac.o: No PCI boards found.
> ac.o: For an ISA board you must supply memory and irq parameters.
> initcall applicom_init+0x0/0x4cc returned -6 after 13 msecs
> initcall applicom_init+0x0/0x4cc returned with error code -6
> calling rtc_init+0x0/0xa6
> Real Time Clock Driver v1.12ac
> initcall rtc_init+0x0/0xa6 returned 0 after 2 msecs
> calling hpet_init+0x0/0x60
> initcall hpet_init+0x0/0x60 returned 0 after 0 msecs
> calling nvram_init+0x0/0x80
> Non-volatile memory driver v1.2
> initcall nvram_init+0x0/0x80 returned 0 after 2 msecs
> calling i8k_init+0x0/0x154
> initcall i8k_init+0x0/0x154 returned -19 after 0 msecs
> calling mod_init+0x0/0x1da
> initcall mod_init+0x0/0x1da returned -19 after 0 msecs
> calling ppdev_init+0x0/0xa7
> ppdev: user-space parallel port driver
> initcall ppdev_init+0x0/0xa7 returned 0 after 3 msecs
> calling tlclk_init+0x0/0x1ae
> telclk_interrup = 0xf non-mcpbl0010 hw.
> initcall tlclk_init+0x0/0x1ae returned -6 after 3 msecs
> initcall tlclk_init+0x0/0x1ae returned with error code -6
> calling agp_init+0x0/0x26
> Linux agpgart interface v0.103
> initcall agp_init+0x0/0x26 returned 0 after 2 msecs
> calling agp_intel_init+0x0/0x24
> initcall agp_intel_init+0x0/0x24 returned 0 after 0 msecs
> calling agp_via_init+0x0/0x24
> initcall agp_via_init+0x0/0x24 returned 0 after 0 msecs
> calling init_atmel+0x0/0x17c
> initcall init_atmel+0x0/0x17c returned -19 after 0 msecs
> calling drm_core_init+0x0/0xef
> [drm] Initialized drm 1.1.0 20060810
> initcall drm_core_init+0x0/0xef returned 0 after 3 msecs
> calling tdfx_init+0x0/0xc
> initcall tdfx_init+0x0/0xc returned 0 after 0 msecs
> calling radeon_init+0x0/0x18
> pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:01:00.0 to 64
> [drm] Initialized radeon 1.29.0 20080528 on minor 0
> initcall radeon_init+0x0/0x18 returned 0 after 15 msecs
> calling i810_init+0x0/0x18
> initcall i810_init+0x0/0x18 returned 0 after 0 msecs
> calling i915_init+0x0/0x18
> initcall i915_init+0x0/0x18 returned 0 after 0 msecs
> calling sis_init+0x0/0x18
> initcall sis_init+0x0/0x18 returned 0 after 0 msecs
> calling via_init+0x0/0x22
> initcall via_init+0x0/0x22 returned 0 after 0 msecs
> calling serial8250_init+0x0/0x122
> Serial: 8250/16550 driver4 ports, IRQ sharing disabled
> �serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> initcall serial8250_init+0x0/0x122 returned 0 after 251 msecs
> calling jsm_init_module+0x0/0x3e
> initcall jsm_init_module+0x0/0x3e returned 0 after 0 msecs
> calling parport_default_proc_register+0x0/0x1b
> initcall parport_default_proc_register+0x0/0x1b returned 0 after 0 msecs
> calling parport_pc_init+0x0/0x338
> parport_pc 00:08: reported by Plug and Play ACPI
> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
> initcall parport_pc_init+0x0/0x338 returned 0 after 10 msecs
> calling parport_ax88796_init+0x0/0xc
> initcall parport_ax88796_init+0x0/0xc returned 0 after 0 msecs
> calling topology_sysfs_init+0x0/0x41
> initcall topology_sysfs_init+0x0/0x41 returned 0 after 0 msecs
> calling loop_init+0x0/0x196
> loop: module loaded
> initcall loop_init+0x0/0x196 returned 0 after 2 msecs
> calling cpqarray_init+0x0/0x251
> Compaq SMART2 Driver (v 2.6.0)
> initcall cpqarray_init+0x0/0x251 returned 0 after 2 msecs
> calling cciss_init+0x0/0x28
> HP CISS Driver (v 3.6.20)
> initcall cciss_init+0x0/0x28 returned 0 after 2 msecs
> calling ub_init+0x0/0x6a
> usbcore: registered new interface driver ub
> initcall ub_init+0x0/0x6a returned 0 after 3 msecs
> calling pasic3_base_init+0x0/0x13
> initcall pasic3_base_init+0x0/0x13 returned -19 after 0 msecs
> calling e1000_init_module+0x0/0x61
> e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
> e1000e: Copyright (c) 1999-2008 Intel Corporation.
> e1000e 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:04:00.0 to 64
> eth0: (PCI Express:2.5GB/s:Width x1) 00:16:76:ab:6e:84
> eth0: Intel(R) PRO/1000 Network Connection
> eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
> initcall e1000_init_module+0x0/0x61 returned 0 after 141 msecs
> calling ixgb_init_module+0x0/0x4b
> Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
> Copyright (c) 1999-2008 Intel Corporation.
> initcall ixgb_init_module+0x0/0x4b returned 0 after 8 msecs
> calling ipg_init_module+0x0/0x15
> initcall ipg_init_module+0x0/0x15 returned 0 after 0 msecs
> calling cxgb3_init_module+0x0/0x20
> initcall cxgb3_init_module+0x0/0x20 returned 0 after 0 msecs
> calling vcan_init_module+0x0/0x36
> vcan: Virtual CAN interface driver
> initcall vcan_init_module+0x0/0x36 returned 0 after 3 msecs
> calling atl1_init_module+0x0/0x15
> initcall atl1_init_module+0x0/0x15 returned 0 after 0 msecs
> calling plip_init+0x0/0x5d
> NET3 PLIP version 2.4-parport gniibe@....co.jp
> plip0: Parallel port at 0x378, using IRQ 7.
> initcall plip_init+0x0/0x5d returned 0 after 8 msecs
> calling gem_init+0x0/0x15
> initcall gem_init+0x0/0x15 returned 0 after 0 msecs
> calling vortex_init+0x0/0xa9
> initcall vortex_init+0x0/0xa9 returned 0 after 0 msecs
> calling ne2k_pci_init+0x0/0x15
> initcall ne2k_pci_init+0x0/0x15 returned 0 after 0 msecs
> calling e100_init_module+0x0/0x5c
> e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
> e100: Copyright(c) 1999-2006 Intel Corporation
> initcall e100_init_module+0x0/0x5c returned 0 after 8 msecs
> calling tlan_probe+0x0/0xda
> ThunderLAN driver v1.15
> TLAN: 0 devices installed, PCI: 0 EISA: 0
> initcall tlan_probe+0x0/0xda returned -19 after 5 msecs
> calling epic_init+0x0/0x15
> initcall epic_init+0x0/0x15 returned 0 after 0 msecs
> calling sis190_init_module+0x0/0x15
> initcall sis190_init_module+0x0/0x15 returned 0 after 0 msecs
> calling r6040_init+0x0/0x15
> initcall r6040_init+0x0/0x15 returned 0 after 0 msecs
> calling yellowfin_init+0x0/0x15
> initcall yellowfin_init+0x0/0x15 returned 0 after 0 msecs
> calling natsemi_init_mod+0x0/0x15
> initcall natsemi_init_mod+0x0/0x15 returned 0 after 0 msecs
> calling ns83820_init+0x0/0x28
> ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
> initcall ns83820_init+0x0/0x28 returned 0 after 5 msecs
> calling tg3_init+0x0/0x15
> initcall tg3_init+0x0/0x15 returned 0 after 0 msecs
> calling bnx2_init+0x0/0x15
> initcall bnx2_init+0x0/0x15 returned 0 after 0 msecs
> calling bnx2x_init+0x0/0x15
> initcall bnx2x_init+0x0/0x15 returned 0 after 0 msecs
> calling skge_init_module+0x0/0x15
> initcall skge_init_module+0x0/0x15 returned 0 after 0 msecs
> calling sky2_init_module+0x0/0x49
> initcall sky2_init_module+0x0/0x49 returned 0 after 0 msecs
> calling rhine_init+0x0/0x39
> initcall rhine_init+0x0/0x39 returned 0 after 0 msecs
> calling starfire_init+0x0/0x15
> initcall starfire_init+0x0/0x15 returned 0 after 0 msecs
> calling marvell_init+0x0/0x5e
> initcall marvell_init+0x0/0x5e returned 0 after 0 msecs
> calling cicada_init+0x0/0x35
> initcall cicada_init+0x0/0x35 returned 0 after 0 msecs
> calling lxt_init+0x0/0x35
> initcall lxt_init+0x0/0x35 returned 0 after 0 msecs
> calling qs6612_init+0x0/0xc
> initcall qs6612_init+0x0/0xc returned 0 after 0 msecs
> calling ip175c_init+0x0/0xc
> initcall ip175c_init+0x0/0xc returned 0 after 0 msecs
> calling fixed_mdio_bus_init+0x0/0x9e
> Fixed MDIO Bus: probed
> initcall fixed_mdio_bus_init+0x0/0x9e returned 0 after 2 msecs
> calling sundance_init+0x0/0x15
> initcall sundance_init+0x0/0x15 returned 0 after 0 msecs
> calling hamachi_init+0x0/0x15
> initcall hamachi_init+0x0/0x15 returned 0 after 0 msecs
> calling net_olddevs_init+0x0/0x95
> initcall net_olddevs_init+0x0/0x95 returned 0 after 0 msecs
> calling b44_init+0x0/0x59
> initcall b44_init+0x0/0x59 returned 0 after 0 msecs
> calling init_nic+0x0/0x15
> initcall init_nic+0x0/0x15 returned 0 after 0 msecs
> calling ql3xxx_init_module+0x0/0x15
> initcall ql3xxx_init_module+0x0/0x15 returned 0 after 0 msecs
> calling dummy_init_module+0x0/0xb2
> initcall dummy_init_module+0x0/0xb2 returned 0 after 0 msecs
> calling macvlan_init_module+0x0/0x49
> initcall macvlan_init_module+0x0/0x49 returned 0 after 0 msecs
> calling dfx_init+0x0/0x15
> initcall dfx_init+0x0/0x15 returned 0 after 0 msecs
> calling rtl8139_init_module+0x0/0x15
> initcall rtl8139_init_module+0x0/0x15 returned 0 after 0 msecs
> calling atp_init_module+0x0/0x93
> atp.c:v1.09=ac 2002/10/01 Donald Becker <becker@...ld.com>
> initcall atp_init_module+0x0/0x93 returned -19 after 5 msecs
> calling eql_init_module+0x0/0x5b
> Equalizer2002: Simon Janes (simon@....com) and David S. Miller (davem@...hat.com)
> initcall eql_init_module+0x0/0x5b returned 0 after 7 msecs
> calling tun_init+0x0/0x96
> tun: Universal TUN/TAP device driver, 1.6
> tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com>
> initcall tun_init+0x0/0x96 returned 0 after 8 msecs
> calling rio_init+0x0/0x15
> initcall rio_init+0x0/0x15 returned 0 after 0 msecs
> calling s2io_starter+0x0/0x15
> initcall s2io_starter+0x0/0x15 returned 0 after 0 msecs
> calling xl_pci_init+0x0/0x15
> initcall xl_pci_init+0x0/0x15 returned 0 after 0 msecs
> calling init_dlci+0x0/0x35
> DLCI driver v0.35, 4 Jan 1997, mike.mclagan@...ux.org.
> initcall init_dlci+0x0/0x35 returned 0 after 4 msecs
> calling usb_rtl8150_init+0x0/0x28
> rtl8150: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
> usbcore: registered new interface driver rtl8150
> initcall usb_rtl8150_init+0x0/0x28 returned 0 after 9 msecs
> calling cdc_init+0x0/0x15
> usbcore: registered new interface driver cdc_ether
> initcall cdc_init+0x0/0x15 returned 0 after 4 msecs
> calling dm9601_init+0x0/0x15
> usbcore: registered new interface driver dm9601
> initcall dm9601_init+0x0/0x15 returned 0 after 4 msecs
> calling usbnet_init+0x0/0x15
> usbcore: registered new interface driver gl620a
> initcall usbnet_init+0x0/0x15 returned 0 after 4 msecs
> calling plusb_init+0x0/0x15
> usbcore: registered new interface driver plusb
> initcall plusb_init+0x0/0x15 returned 0 after 4 msecs
> calling rndis_init+0x0/0x15
> usbcore: registered new interface driver rndis_host
> initcall rndis_init+0x0/0x15 returned 0 after 4 msecs
> calling cdc_subset_init+0x0/0x15
> usbcore: registered new interface driver cdc_subset
> initcall cdc_subset_init+0x0/0x15 returned 0 after 4 msecs
> calling mcs7830_init+0x0/0x15
> usbcore: registered new interface driver MOSCHIP usb-ethernet driver
> initcall mcs7830_init+0x0/0x15 returned 0 after 5 msecs
> calling usbnet_init+0x0/0x2b
> initcall usbnet_init+0x0/0x2b returned 0 after 0 msecs
> calling ipw2100_init+0x0/0x65
> ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
> ipw2100: Copyright(c) 2003-2006 Intel Corporation
> initcall ipw2100_init+0x0/0x65 returned 0 after 9 msecs
> calling ipw_init+0x0/0x7f
> ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kd
> ipw2200: Copyright(c) 2003-2006 Intel Corporation
> initcall ipw_init+0x0/0x7f returned 0 after 9 msecs
> calling init_orinoco+0x0/0x1d
> orinoco 0.15 (David Gibson <hermes@...son.dropbear.id.au>, Pavel Roskin <proski@....org>, et al)
> initcall init_orinoco+0x0/0x1d returned 0 after 8 msecs
> calling init_hermes+0x0/0x3
> initcall init_hermes+0x0/0x3 returned 0 after 0 msecs
> calling orinoco_plx_init+0x0/0x2f
> orinoco_plx 0.15 (Pavel Roskin <proski@....org>, David Gibson <hermes@...son.dropbear.id.au>, Daniel Barlow <dan@...ent.net>)
> initcall orinoco_plx_init+0x0/0x2f returned 0 after 10 msecs
> calling orinoco_nortel_init+0x0/0x2f
> orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger <disdos@...um404.de>)
> initcall orinoco_nortel_init+0x0/0x2f returned 0 after 6 msecs
> calling airo_init_module+0x0/0xe3
> airo(): Probing for PCI adapters
> airo(): Finished probing for PCI adapters
> initcall airo_init_module+0x0/0xe3 returned 0 after 6 msecs
> calling prism54_module_init+0x0/0x36
> Loaded prism54 driver, version 1.2
> initcall prism54_module_init+0x0/0x36 returned 0 after 3 msecs
> calling b43_init+0x0/0x42
> Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
> initcall b43_init+0x0/0x42 returned 0 after 5 msecs
> calling usb_init+0x0/0xad
> zd1211rw usb_init()
> usbcore: registered new interface driver zd1211rw
> zd1211rw initialized
> initcall usb_init+0x0/0xad returned 0 after 8 msecs
> calling rndis_wlan_init+0x0/0x15
> usbcore: registered new interface driver rndis_wlan
> initcall rndis_wlan_init+0x0/0x15 returned 0 after 4 msecs
> calling zd1201_init+0x0/0x15
> usbcore: registered new interface driver zd1201
> initcall zd1201_init+0x0/0x15 returned 0 after 4 msecs
> calling lbs_init_module+0x0/0x38
> initcall lbs_init_module+0x0/0x38 returned 0 after 0 msecs
> calling if_sdio_init_module+0x0/0x2d
> libertas_sdio: Libertas SDIO driver
> libertas_sdio: Copyright Pierre Ossman
> initcall if_sdio_init_module+0x0/0x2d returned 0 after 6 msecs
> calling rtl8180_init+0x0/0x15
> initcall rtl8180_init+0x0/0x15 returned 0 after 0 msecs
> calling rtl8187_init+0x0/0x15
> usbcore: registered new interface driver rtl8187
> initcall rtl8187_init+0x0/0x15 returned 0 after 4 msecs
> calling iwl4965_init+0x0/0x6c
> iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.3.27kd
> iwl4965: Copyright(c) 2003-2008 Intel Corporation
> initcall iwl4965_init+0x0/0x6c returned 0 after 10 msecs
> calling init_mac80211_hwsim+0x0/0x2f0
> mac80211_hwsim: Initializing radio 0
> phy0: Failed to select rate control algorithm
> phy0: Failed to initialize rate control algorithm
> mac80211_hwsim: ieee80211_register_hw failed (-2)
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000370
> IP: [<ffffffff808be0c2>] rollback_registered+0x37/0xfb
> PGD 0
> Oops: 0000 [1] SMP
> CPU 1
> Pid: 1, comm: swapper Not tainted 2.6.26-05253-g14b395e #21308
> RIP: 0010:[<ffffffff808be0c2>] [<ffffffff808be0c2>] rollback_registered+0x37/0xfb
> RSP: 0018:ffff88003f83fe00 EFLAGS: 00010212
> RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffff88003d078ed8
> RDX: ffffffff8095de3d RSI: 0000000000000046 RDI: 0000000000000000
> RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8800042facc0
> R10: 0000000000000000 R11: ffffffff804021ae R12: 0000000000000000
> R13: ffff88003d0799a0 R14: 0000000000000000 R15: 0000000000000008
> FS: 0000000000000000(0000) GS:ffff88003f829160(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000370 CR3: 0000000000201000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 1, threadinfo ffff88003f83e000, task ffff88003f824000)
> Stack: 0000000000000000 ffffffff808be1b8 ffff88003d0782c0 ffffffff809621ab
> ffff88003d0799a0 ffffffff805f1e5d 00000000fffffffe ffff88003d0782c0
> ffff88003d0799e0 ffffffff811e83e4 ffff88003f83fea0 ffffffff80248f12
> Call Trace:
> [<ffffffff808be1b8>] unregister_netdevice+0x32/0x71
> [<ffffffff809621ab>] ieee80211_unregister_hw+0x35/0xd4
> [<ffffffff805f1e5d>] mac80211_hwsim_free+0x1d/0x6a
> [<ffffffff811e83e4>] init_mac80211_hwsim+0x2df/0x2f0
> [<ffffffff80248f12>] getnstimeofday+0x38/0x95
> [<ffffffff80246f48>] ktime_get_ts+0x21/0x49
> [<ffffffff811e8105>] init_mac80211_hwsim+0x0/0x2f0
> [<ffffffff811cb8c9>] kernel_init+0x143/0x295
> [<ffffffff80209b79>] __switch_to+0xb6/0x3bb
> [<ffffffff8020c399>] child_rip+0xa/0x11
> [<ffffffff811cb786>] kernel_init+0x0/0x295
> [<ffffffff8020c38f>] child_rip+0x0/0x11
>
>
> Code: 04 0f 0b eb fe e8 e3 78 00 00 85 c0 75 1d ba ce 0e 00 00 48 c7 c6 b8 e1 d8 80 48 c7 c7 3b 6c ce 80 e8 24 65 97 ff e8 0e f8 94 ff <8b> 83 70 03 00 00 85 c0 75 24 48 89 de 48 89 da 48 c7 c7 e4 e4
> RIP [<ffffffff808be0c2>] rollback_registered+0x37/0xfb
> RSP <ffff88003f83fe00>
> CR2: 0000000000000370
> ---[ end trace 4b01b4c1a97dbebf ]---
> Kernel panic - not syncing: Attempted to kill init!
Powered by blists - more mailing lists