lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 04 Aug 2008 17:21:40 -0700 From: Jeff Kirsher <jeffrey.t.kirsher@...el.com> To: jeff@...zik.org Cc: davem@...emloft.net, netdev@...r.kernel.org, akpm@...ux-foundation.org, Jesse Brandeburg <jesse.brandeburg@...el.com>, Jeff Kirsher <jeffrey.t.kirsher@...el.com> Subject: [PATCH 3/4] e1000e: fix drv load issues From: Jesse Brandeburg <jesse.brandeburg@...el.com> a few people seem to have problems maintaining gigabit link and it was root caused to an interaction between the managability firmware on the host and the driver, not communicating. The form of communication they use is the drv_load bit. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@...el.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com> --- drivers/net/e1000e/netdev.c | 28 ++++++++++++---------------- 1 files changed, 12 insertions(+), 16 deletions(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 589e542..18f076c 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2444,7 +2444,7 @@ void e1000e_reset(struct e1000_adapter *adapter) * For parts with AMT enabled, let the firmware know * that the network interface is in control */ - if ((adapter->flags & FLAG_HAS_AMT) && e1000e_check_mng_mode(hw)) + if (adapter->flags & FLAG_HAS_AMT) e1000_get_hw_control(adapter); ew32(WUC, 0); @@ -2634,8 +2634,7 @@ static int e1000_open(struct net_device *netdev) * If AMT is enabled, let the firmware know that the network * interface is now open */ - if ((adapter->flags & FLAG_HAS_AMT) && - e1000e_check_mng_mode(&adapter->hw)) + if (adapter->flags & FLAG_HAS_AMT) e1000_get_hw_control(adapter); /* @@ -2713,8 +2712,7 @@ static int e1000_close(struct net_device *netdev) * If AMT is enabled, let the firmware know that the network * interface is now closed */ - if ((adapter->flags & FLAG_HAS_AMT) && - e1000e_check_mng_mode(&adapter->hw)) + if (adapter->flags & FLAG_HAS_AMT) e1000_release_hw_control(adapter); return 0; @@ -4030,7 +4028,7 @@ static int e1000_resume(struct pci_dev *pdev) * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ - if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw)) + if (!(adapter->flags & FLAG_HAS_AMT)) e1000_get_hw_control(adapter); return 0; @@ -4149,8 +4147,7 @@ static void e1000_io_resume(struct pci_dev *pdev) * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ - if (!(adapter->flags & FLAG_HAS_AMT) || - !e1000e_check_mng_mode(&adapter->hw)) + if (!(adapter->flags & FLAG_HAS_AMT)) e1000_get_hw_control(adapter); } @@ -4505,8 +4502,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ - if (!(adapter->flags & FLAG_HAS_AMT) || - !e1000e_check_mng_mode(&adapter->hw)) + if (!(adapter->flags & FLAG_HAS_AMT)) e1000_get_hw_control(adapter); /* tell the stack to leave us alone until e1000_open() is called */ @@ -4523,19 +4519,19 @@ static int __devinit e1000_probe(struct pci_dev *pdev, return 0; err_register: -err_hw_init: - e1000_release_hw_control(adapter); + if (!(adapter->flags & FLAG_HAS_AMT)) + e1000_release_hw_control(adapter); err_eeprom: if (!e1000_check_reset_block(&adapter->hw)) e1000_phy_hw_reset(&adapter->hw); +err_hw_init: - if (adapter->hw.flash_address) - iounmap(adapter->hw.flash_address); - -err_flashmap: kfree(adapter->tx_ring); kfree(adapter->rx_ring); err_sw_init: + if (adapter->hw.flash_address) + iounmap(adapter->hw.flash_address); +err_flashmap: iounmap(adapter->hw.hw_addr); err_ioremap: free_netdev(netdev); -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists