| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 26 Aug 2008 04:27:27 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: jeff@...zik.org
Cc: netdev@...r.kernel.org, davem@...emloft.net,
akpm@...ux-foundation.org,
Jesse Brandeburg <jesse.brandeburg@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [NET-NEXT PATCH 12/13] ixgbe: fix dca hints going to wrong processor
From: Jesse Brandeburg <jesse.brandeburg@...el.com>
hardware was configured incorrectly which led all hints to be
sent to queue[0]'s DCA configuration.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ixgbe/ixgbe_main.c | 90 +++++++++++++++++++++++++++++-----------
drivers/net/ixgbe/ixgbe_type.h | 10 ++--
2 files changed, 69 insertions(+), 31 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 6b96c41..28d3321 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1410,10 +1410,51 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
}
}
-#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
- (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
+#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
+
+static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index)
+{
+ struct ixgbe_ring *rx_ring;
+ u32 srrctl;
+ int queue0;
+ unsigned long *mask, maskval = 1;
+ long shift, len;
+
+ if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
+ mask = (unsigned long *) &adapter->ring_feature[RING_F_RSS].mask;
+ len = sizeof(adapter->ring_feature[RING_F_RSS].mask) * 8;
+ } else {
+ mask = &maskval;
+ len = 1;
+ }
+ shift = find_first_bit(mask, len);
+ queue0 = index << shift;
+ rx_ring = &adapter->rx_ring[queue0];
+
+ srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(index));
+
+ srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
+ srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
+
+ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ srrctl |= IXGBE_RXBUFFER_2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+ srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
+ srrctl |= ((IXGBE_RX_HDR_SIZE <<
+ IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
+ IXGBE_SRRCTL_BSIZEHDR_MASK);
+ } else {
+ srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
+
+ if (rx_ring->rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE)
+ srrctl |= IXGBE_RXBUFFER_2048 >>
+ IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+ else
+ srrctl |= rx_ring->rx_buf_len >>
+ IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+ }
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(index), srrctl);
+}
-#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
/**
* ixgbe_get_skb_hdr - helper function for LRO header processing
* @skb: pointer to sk_buff to be added to LRO packet
@@ -1441,6 +1482,9 @@ static int ixgbe_get_skb_hdr(struct sk_buff *skb, void **iphdr, void **tcph,
return 0;
}
+#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
+ (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
+
/**
* ixgbe_configure_rx - Configure 8259x Receive Unit after Reset
* @adapter: board private structure
@@ -1460,7 +1504,8 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
0x6A3E67EA, 0x14364D17, 0x3BED200D};
u32 fctrl, hlreg0;
u32 pages;
- u32 reta = 0, mrqc, srrctl;
+ u32 reta = 0, mrqc;
+ u32 rdrxctl;
int rx_buf_len;
/* Decide whether to use packet split mode or not */
@@ -1493,27 +1538,6 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
pages = PAGE_USE_COUNT(adapter->netdev->mtu);
- srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(0));
- srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
- srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
-
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
- srrctl |= PAGE_SIZE >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
- srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
- srrctl |= ((IXGBE_RX_HDR_SIZE <<
- IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
- IXGBE_SRRCTL_BSIZEHDR_MASK);
- } else {
- srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
-
- if (rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE)
- srrctl |=
- IXGBE_RXBUFFER_2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
- else
- srrctl |= rx_buf_len >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
- }
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(0), srrctl);
-
rdlen = adapter->rx_ring[0].count * sizeof(union ixgbe_adv_rx_desc);
/* disable receives while setting up the descriptors */
rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
@@ -1542,8 +1566,24 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
adapter->rx_ring[i].lro_mgr.dev = adapter->netdev;
adapter->rx_ring[i].lro_mgr.ip_summed = CHECKSUM_UNNECESSARY;
adapter->rx_ring[i].lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY;
+
+ ixgbe_configure_srrctl(adapter, j);
}
+ /*
+ * For VMDq support of different descriptor types or
+ * buffer sizes through the use of multiple SRRCTL
+ * registers, RDRXCTL.MVMEN must be set to 1
+ *
+ * also, the manual doesn't mention it clearly but DCA hints
+ * will only use queue 0's tags unless this bit is set. Side
+ * effects of setting this bit are only that SRRCTL must be
+ * fully programmed [0..15]
+ */
+ rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+ rdrxctl |= IXGBE_RDRXCTL_MVMEN;
+ IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
+
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
/* Fill out redirection table */
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 85eb03c..3e9c483 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -356,12 +356,10 @@
#define IXGBE_ANLP2 0x042B4
#define IXGBE_ATLASCTL 0x04800
-/* RSCCTL Bit Masks */
-#define IXGBE_RSCCTL_RSCEN 0x01
-#define IXGBE_RSCCTL_MAXDESC_1 0x00
-#define IXGBE_RSCCTL_MAXDESC_4 0x04
-#define IXGBE_RSCCTL_MAXDESC_8 0x08
-#define IXGBE_RSCCTL_MAXDESC_16 0x0C
+/* RDRXCTL Bit Masks */
+#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min Threshold Size */
+#define IXGBE_RDRXCTL_MVMEN 0x00000020
+#define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */
/* CTRL Bit Masks */
#define IXGBE_CTRL_GIO_DIS 0x00000004 /* Global IO Master Disable bit */
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists