lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 27 Aug 2008 12:52:54 +0100
From:	Russell King - ARM Linux <linux@....linux.org.uk>
To:	netdev@...r.kernel.org, Jeff Garzik <jgarzik@...ox.com>
Subject: [PATCH] [NET] smc91x: provide configurable leds

This patch provides a mechanism for platforms to be able to supply the
LED configuration via platform data, rather than having to hard code
it in smc91x.h.

Signed-off-by: Russell King <rmk+kernel@....linux.org.uk>
Tested-by: Marc Zyngier <maz@...terjones.org>
Acked-by: Nicolas Pitre <nico@....org>

--
As noticed by Eric against the Viper patches, being able to configure
the LEDs from platform code would be a good idea.  This patch implements
a mechanism to allow that to happen.

Since ARM platforms will depend on this, I'd prefer to add it to the
ARM tree, so I'm after an Ack from networking people.

diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 2040965..ceed2f6 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1520,7 +1520,9 @@ smc_open(struct net_device *dev)
 	/* Setup the default Register Modes */
 	lp->tcr_cur_mode = TCR_DEFAULT;
 	lp->rcr_cur_mode = RCR_DEFAULT;
-	lp->rpc_cur_mode = RPC_DEFAULT;
+	lp->rpc_cur_mode = RPC_DEFAULT |
+				lp->cfg.leda << RPC_LSXA_SHFT |
+				lp->cfg.ledb << RPC_LSXB_SHFT;
 
 	/*
 	 * If we are not using a MII interface, we need to
@@ -2157,6 +2159,11 @@ static int smc_drv_probe(struct platform_device *pdev)
 		lp->cfg.flags |= (nowait) ? SMC91X_NOWAIT : 0;
 	}
 
+	if (!lp->cfg.leda && !lp->cfg.ledb) {
+		lp->cfg.leda = RPC_LSA_DEFAULT;
+		lp->cfg.ledb = RPC_LSB_DEFAULT;
+	}
+
 	ndev->dma = (unsigned char)-1;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 997e7f1..8322e7f 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -794,7 +794,7 @@ smc_pxa_dma_irq(int dma, void *dummy)
 #define RPC_LSB_DEFAULT RPC_LED_FD
 #endif
 
-#define RPC_DEFAULT (RPC_ANEG | (RPC_LSA_DEFAULT << RPC_LSXA_SHFT) | (RPC_LSB_DEFAULT << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX)
+#define RPC_DEFAULT (RPC_ANEG | RPC_SPEED | RPC_DPLX)
 
 
 /* Bank 0 0x0C is reserved */
diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h
index 3827b92..ed25483 100644
--- a/include/linux/smc91x.h
+++ b/include/linux/smc91x.h
@@ -18,6 +18,8 @@
 
 struct smc91x_platdata {
 	unsigned long flags;
+	unsigned char leda;
+	unsigned char ledb;
 };
 
 #endif /* __SMC91X_H__ */

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ