netdev - [PATCH v2.6.29 01/14] gianfar: Use gfar_halt to stop DMA in gfar

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 16 Dec 2008 17:20:54 -0600
From:	Andy Fleming <afleming@...escale.com>
To:	jeff@...zik.org
Cc:	galak@...nel.crashing.org, netdev@...r.kernel.org,
	Andy Fleming <afleming@...escale.com>
Subject: [PATCH v2.6.29 01/14] gianfar: Use gfar_halt to stop DMA in gfar_probe

gfar_halt does everything we want to do there, including disabling
TX/RX.  It also doesn't unnecessarily enable DMA if it's already
stopped.

Signed-off-by: Andy Fleming <afleming@...escale.com>
---
 drivers/net/gianfar.c |   14 +-------------
 1 files changed, 1 insertions(+), 13 deletions(-)

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 451f6b8..6ceff8d 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -225,19 +225,7 @@ static int gfar_probe(struct platform_device *pdev)
 
 	/* Stop the DMA engine now, in case it was running before */
 	/* (The firmware could have used it, and left it running). */
-	/* To do this, we write Graceful Receive Stop and Graceful */
-	/* Transmit Stop, and then wait until the corresponding bits */
-	/* in IEVENT indicate the stops have completed. */
-	tempval = gfar_read(&priv->regs->dmactrl);
-	tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
-	gfar_write(&priv->regs->dmactrl, tempval);
-
-	tempval = gfar_read(&priv->regs->dmactrl);
-	tempval |= (DMACTRL_GRS | DMACTRL_GTS);
-	gfar_write(&priv->regs->dmactrl, tempval);
-
-	while (!(gfar_read(&priv->regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC)))
-		cpu_relax();
+	gfar_halt(dev);
 
 	/* Reset MAC layer */
 	gfar_write(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
-- 
1.5.4.GIT

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html