netdev - Re: Yukon2 88E8056 card problem with switch?

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 14 May 2009 17:41:41 +0200
From:	Carsten Aulbert <carsten.aulbert@....mpg.de>
To:	Stephen Hemminger <shemminger@...ux-foundation.org>
CC:	netdev@...r.kernel.org
Subject: Re: Yukon2 88E8056 card problem with switch?

Hi (thanks for the quick reply)

Stephen Hemminger schrieb:
> 
> You are only seeing partial flow control. My recommendation would be to
> turn off flow control with:
>    ethtool -A eth0 autoneg off rx off tx off

I've tried that, but that did *not* change the overall behavior -
although I omitted autosense off so far. I'll redo the test.

> 
> It works with other switches, so check cable and try another switch.
> 

I'll check that again, however we are pretty limited to this brand since
we need to have these because of the big uplink capabilities. If I
cannot reproduce this with another switch, I'll start bugging them :)

Cheers

Carsten
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html