| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 04 Jun 2009 19:02:24 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, gospo@...hat.com,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next PATCH 09/10] ixgbe: Add FW detection and warning for 82599
SFP+ adapters
From: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@...el.com>
82599 has a FW running that helps manage the internal SFI PHY. There are
also a number of pre-production samples of these SFI-based devices in the
field. This patch adds a check to look for the firmware running on all
SFP+ based adapters, and displays a warning to the system log if a
pre-production adapter is identified. The driver will continue loading
though, with no functional degradation.
Also remove an old function prototype from ixgbe_82599.c that isn't being
used.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ixgbe/ixgbe_82599.c | 58 ++++++++++++++++++++++++++++++++++++--
drivers/net/ixgbe/ixgbe_common.c | 12 +++++---
drivers/net/ixgbe/ixgbe_main.c | 20 ++++++++++++-
drivers/net/ixgbe/ixgbe_type.h | 3 ++
4 files changed, 85 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 5c2627b..1984cab 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -71,10 +71,10 @@ s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw);
s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw);
s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val);
s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val);
-s32 ixgbe_start_hw_rev_0_82599(struct ixgbe_hw *hw);
s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw);
s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw);
u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw);
+static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
{
@@ -2142,8 +2142,9 @@ s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
{
u32 q_num;
+ s32 ret_val;
- ixgbe_start_hw_generic(hw);
+ ret_val = ixgbe_start_hw_generic(hw);
/* Clear the rate limiters */
for (q_num = 0; q_num < hw->mac.max_tx_queues; q_num++) {
@@ -2155,7 +2156,10 @@ s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
/* We need to run link autotry after the driver loads */
hw->mac.autotry_restart = true;
- return 0;
+ if (ret_val == 0)
+ ret_val = ixgbe_verify_fw_version_82599(hw);
+
+ return ret_val;
}
/**
@@ -2407,6 +2411,54 @@ san_mac_addr_out:
return 0;
}
+/**
+ * ixgbe_verify_fw_version_82599 - verify fw version for 82599
+ * @hw: pointer to hardware structure
+ *
+ * Verifies that installed the firmware version is 0.6 or higher
+ * for SFI devices. All 82599 SFI devices should have version 0.6 or higher.
+ *
+ * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or
+ * if the FW version is not supported.
+ **/
+static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_EEPROM_VERSION;
+ u16 fw_offset, fw_ptp_cfg_offset;
+ u16 fw_version = 0;
+
+ /* firmware check is only necessary for SFI devices */
+ if (hw->phy.media_type != ixgbe_media_type_fiber) {
+ status = 0;
+ goto fw_version_out;
+ }
+
+ /* get the offset to the Firmware Module block */
+ hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
+
+ if ((fw_offset == 0) || (fw_offset == 0xFFFF))
+ goto fw_version_out;
+
+ /* get the offset to the Pass Through Patch Configuration block */
+ hw->eeprom.ops.read(hw, (fw_offset +
+ IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR),
+ &fw_ptp_cfg_offset);
+
+ if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF))
+ goto fw_version_out;
+
+ /* get the firmware version */
+ hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset +
+ IXGBE_FW_PATCH_VERSION_4),
+ &fw_version);
+
+ if (fw_version > 0x5)
+ status = 0;
+
+fw_version_out:
+ return status;
+}
+
static struct ixgbe_mac_operations mac_ops_82599 = {
.init_hw = &ixgbe_init_hw_generic,
.reset_hw = &ixgbe_reset_hw_82599,
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index db339d6..96a1859 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -106,13 +106,17 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
**/
s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
{
+ s32 status;
+
/* Reset the hardware */
- hw->mac.ops.reset_hw(hw);
+ status = hw->mac.ops.reset_hw(hw);
- /* Start the HW */
- hw->mac.ops.start_hw(hw);
+ if (status == 0) {
+ /* Start the HW */
+ status = hw->mac.ops.start_hw(hw);
+ }
- return 0;
+ return status;
}
/**
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index ca7c5d5..543a606 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2728,6 +2728,15 @@ void ixgbe_reset(struct ixgbe_adapter *adapter)
case IXGBE_ERR_MASTER_REQUESTS_PENDING:
dev_err(&adapter->pdev->dev, "master disable timed out\n");
break;
+ case IXGBE_ERR_EEPROM_VERSION:
+ /* We are running on a pre-production device, log a warning */
+ dev_warn(&adapter->pdev->dev, "This device is a pre-production "
+ "adapter/LOM. Please be aware there may be issues "
+ "associated with your hardware. If you are "
+ "experiencing problems please contact your Intel or "
+ "hardware representative who provided you with this "
+ "hardware.\n");
+ break;
default:
dev_err(&adapter->pdev->dev, "Hardware Error: %d\n", err);
}
@@ -5608,8 +5617,17 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
hw->eeprom.ops.read(hw, 0x29, &adapter->eeprom_version);
/* reset the hardware with the new settings */
- hw->mac.ops.start_hw(hw);
+ err = hw->mac.ops.start_hw(hw);
+ if (err == IXGBE_ERR_EEPROM_VERSION) {
+ /* We are running on a pre-production device, log a warning */
+ dev_warn(&pdev->dev, "This device is a pre-production "
+ "adapter/LOM. Please be aware there may be issues "
+ "associated with your hardware. If you are "
+ "experiencing problems please contact your Intel or "
+ "hardware representative who provided you with this "
+ "hardware.\n");
+ }
strcpy(netdev->name, "eth%d");
err = register_netdev(netdev);
if (err)
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 68cac36..fa87309 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -1516,6 +1516,8 @@
#define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET 0x3
#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP 0x1
#define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS 0x2
+#define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR 0x4
+#define IXGBE_FW_PATCH_VERSION_4 0x7
/* PCI Bus Info */
#define IXGBE_PCI_LINK_STATUS 0xB2
@@ -2495,6 +2497,7 @@ struct ixgbe_info {
#define IXGBE_ERR_SFP_NOT_PRESENT -20
#define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -21
#define IXGBE_ERR_FDIR_REINIT_FAILED -23
+#define IXGBE_ERR_EEPROM_VERSION -24
#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF
#endif /* _IXGBE_TYPE_H_ */
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists