| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 25 Aug 2009 15:58:38 +0100
From: Alan Cox <alan@...ux.intel.com>
To: greg@...ah.com, netdev@...r.kernel.org
Subject: [PATCH 07/26] et131x: kill copied PCI fields
They are all in the pcidev anyway plus are not used by the code
Signed-off-by: Alan Cox <alan@...ux.intel.com>
---
drivers/staging/et131x/et1310_eeprom.c | 2 +-
drivers/staging/et131x/et1310_phy.c | 2 +-
drivers/staging/et131x/et131x_adapter.h | 13 -------------
drivers/staging/et131x/et131x_config.c | 3 ++-
drivers/staging/et131x/et131x_initpci.c | 20 ++++----------------
5 files changed, 8 insertions(+), 32 deletions(-)
diff --git a/drivers/staging/et131x/et1310_eeprom.c b/drivers/staging/et131x/et1310_eeprom.c
index 9a6dbd6..29d1c0e 100644
--- a/drivers/staging/et131x/et1310_eeprom.c
+++ b/drivers/staging/et131x/et1310_eeprom.c
@@ -292,7 +292,7 @@ int32_t EepromWriteByte(struct et131x_adapter *etdev, uint32_t unAddress,
* so we do a blind write for load bug.
*/
if (bStatus & LBCIF_STATUS_GENERAL_ERROR
- && etdev->RevisionID == 0) {
+ && etdev->pdev->revision == 0) {
break;
}
diff --git a/drivers/staging/et131x/et1310_phy.c b/drivers/staging/et131x/et1310_phy.c
index d9c7a44..63a23b9 100644
--- a/drivers/staging/et131x/et1310_phy.c
+++ b/drivers/staging/et131x/et1310_phy.c
@@ -841,7 +841,7 @@ void TPAL_SetPhyAutoNeg(struct et131x_adapter *etdev)
ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_BOTH);
- if (etdev->DeviceID != ET131X_PCI_DEVICE_ID_FAST)
+ if (etdev->pdev->device != ET131X_PCI_DEVICE_ID_FAST)
ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL);
else
ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
diff --git a/drivers/staging/et131x/et131x_adapter.h b/drivers/staging/et131x/et131x_adapter.h
index df4a625..69509d7 100644
--- a/drivers/staging/et131x/et131x_adapter.h
+++ b/drivers/staging/et131x/et131x_adapter.h
@@ -250,19 +250,6 @@ struct et131x_adapter {
/* Pointer to the device's PCI register space */
ADDRESS_MAP_t __iomem *CSRAddress;
- /* PCI config space info, for debug purposes only. */
- u8 RevisionID;
- u16 VendorID;
- u16 DeviceID;
- u16 SubVendorID;
- u16 SubSystemID;
- u32 CacheFillSize;
- u16 PciXDevCtl;
- u8 pci_lat_timer;
- u8 pci_hdr_type;
- u8 pci_bist;
- u32 pci_cfg_state[64 / sizeof(u32)];
-
/* Registry parameters */
u8 SpeedDuplex; /* speed/duplex */
eFLOW_CONTROL_t RegistryFlowControl; /* for 802.3x flow control */
diff --git a/drivers/staging/et131x/et131x_config.c b/drivers/staging/et131x/et131x_config.c
index 148672b..499cf75 100644
--- a/drivers/staging/et131x/et131x_config.c
+++ b/drivers/staging/et131x/et131x_config.c
@@ -76,6 +76,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/bitops.h>
+#include <linux/pci.h>
#include <asm/system.h>
#include <linux/netdevice.h>
@@ -288,7 +289,7 @@ void et131x_config_parse(struct et131x_adapter *etdev)
/* If we are the 10/100 device, and gigabit is somehow requested then
* knock it down to 100 full.
*/
- if (etdev->DeviceID == ET131X_PCI_DEVICE_ID_FAST &&
+ if (etdev->pdev->device == ET131X_PCI_DEVICE_ID_FAST &&
etdev->SpeedDuplex == 5)
etdev->SpeedDuplex = 4;
diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c
index d84b654..86bd55d 100644
--- a/drivers/staging/et131x/et131x_initpci.c
+++ b/drivers/staging/et131x/et131x_initpci.c
@@ -240,6 +240,7 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev)
uint8_t eepromStat;
uint8_t maxPayload = 0;
uint8_t read_size_reg;
+ u8 rev;
DBG_ENTER(et131x_dbginfo);
@@ -283,15 +284,14 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev)
* present, we need to fail.
*/
if (eepromStat & 0x4C) {
- result = pci_read_config_byte(pdev, PCI_REVISION_ID,
- &adapter->RevisionID);
+ result = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
if (result != PCIBIOS_SUCCESSFUL) {
DBG_ERROR(et131x_dbginfo,
"Could not read PCI config space for "
"Revision ID\n");
DBG_LEAVE(et131x_dbginfo);
return -EIO;
- } else if (adapter->RevisionID == 0x01) {
+ } else if (rev == 0x01) {
int32_t nLoop;
uint8_t ucTemp[4] = { 0xFE, 0x13, 0x10, 0xFF };
@@ -405,16 +405,6 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev)
return -EIO;
}
- /* PCI Express Configuration registers 0x48-0x5B (Device Control) */
- result = pci_read_config_word(pdev, ET1310_PCI_DEV_CTRL,
- &adapter->PciXDevCtl);
- if (result != PCIBIOS_SUCCESSFUL) {
- DBG_ERROR(et131x_dbginfo,
- "Could not read PCI config space for PCI Express Dev Ctl\n");
- DBG_LEAVE(et131x_dbginfo);
- return -EIO;
- }
-
/* Get MAC address from config space if an eeprom exists, otherwise
* the MAC address there will not be valid
*/
@@ -556,7 +546,7 @@ int et131x_adapter_setup(struct et131x_adapter *etdev)
* We need to turn off 1000 base half dulplex, the mac does not
* support it. For the 10/100 part, turn off all gig advertisement
*/
- if (etdev->DeviceID != ET131X_PCI_DEVICE_ID_FAST)
+ if (etdev->pdev->device != ET131X_PCI_DEVICE_ID_FAST)
ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL);
else
ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
@@ -890,8 +880,6 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev,
adapter = netdev_priv(netdev);
adapter->pdev = pdev;
adapter->netdev = netdev;
- adapter->VendorID = pdev->vendor;
- adapter->DeviceID = pdev->device;
/* Do the same for the netdev struct */
netdev->irq = pdev->irq;
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists