The 82576 has support for bandwidth allocation to VFs. Contrary to the documentation in the 82576 datasheet v2.41 this appears to work as follows: * The ratio supplied is always proportional to 1Gbit/s, regardless of if the link speed. * The ratio supplied is an upper-bound on bandwidth available to the VF, not a minimun guarantee This patch exposes bandwidth control to userspace through a simple per-device (PF) sysfs file, bandwidth_allocation. * The file contains a whitespace delimited list of values, one per VF. * The first value corresponds to the first VF and so on. * Valid values are integers from 0 to 1000 * A value of 0 indicates that bandwidth_allocation is disabled. * Other values indicate the allocated bandwidth, in 1/1000ths of a gigabit/s e.g. The following for a PF with 4 VFs allocates ~20Mbits/ to VF 1, ~100Mbit/s to VF 2, and leave the other 2 VFs with no allocation. echo "20 100 0 0" > /sys/class/net/eth3/device/bandwidth_allocation This interface is intended to allow testing of the hardware feature. There are ongoing discussions about how to expose this feature to user-space in a more generic way. Signed-off-by: Simon Horman Index: net-next-2.6/drivers/net/igb/igb_main.c =================================================================== --- net-next-2.6.orig/drivers/net/igb/igb_main.c 2009-11-05 04:55:06.000000000 +0900 +++ net-next-2.6/drivers/net/igb/igb_main.c 2009-11-05 05:12:54.000000000 +0900 @@ -47,6 +47,9 @@ #ifdef CONFIG_IGB_DCA #include #endif +#ifdef CONFIG_PCI_IOV +#include +#endif #include "igb.h" #define DRV_VERSION "1.3.16-k2" @@ -152,6 +155,15 @@ static unsigned int max_vfs = 0; module_param(max_vfs, uint, 0); MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate " "per physical function"); + +static ssize_t igb_set_bandwidth_allocation(struct device *, + struct device_attribute *, + const char *, size_t); +static ssize_t igb_show_bandwidth_allocation(struct device *, + struct device_attribute *, + char *); +DEVICE_ATTR(bandwidth_allocation, S_IRUGO | S_IWUSR, + igb_show_bandwidth_allocation, igb_set_bandwidth_allocation); #endif /* CONFIG_PCI_IOV */ static pci_ers_result_t igb_io_error_detected(struct pci_dev *, @@ -1754,7 +1766,18 @@ static void __devinit igb_init_vf(struct } if (pci_enable_sriov(pdev, vfn)) - goto err; + goto err_kfree; + + if (device_create_file(&pdev->dev, &dev_attr_bandwidth_allocation)) + goto err_sriov; + + adapter->bandwidth_allocation = kcalloc(vfn, sizeof(unsigned int), + GFP_KERNEL); + if (!adapter->bandwidth_allocation) + goto err_file; + memset(adapter->bandwidth_allocation, vfn * sizeof(unsigned int), 0); + + spin_lock_init(&adapter->bandwidth_allocation_lock); dev_info(&pdev->dev, "%d vfs allocated\n", vfn); for (i = 0; i < vfn; i++) { @@ -1765,7 +1788,11 @@ static void __devinit igb_init_vf(struct adapter->vfs_allocated_count = vfn; return; -err: +err_file: + device_remove_file(&pdev->dev, &dev_attr_bandwidth_allocation); +err_sriov: + pci_disable_sriov(pdev); +err_kfree: kfree(adapter->vf_data); adapter->vf_data = NULL; #endif /* CONFIG_PCI_IOV */ @@ -1781,6 +1808,7 @@ err: static void igb_cleanup_vf(struct igb_adapter * adapter) { #ifdef CONFIG_PCI_IOV + struct pci_dev *pdev = adapter->pdev; struct e1000_hw *hw = &adapter->hw; if (!adapter->vf_data) @@ -1797,6 +1825,9 @@ static void igb_cleanup_vf(struct igb_ad wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ); msleep(100); dev_info(&adapter->pdev->dev, "IOV Disabled\n"); + + device_remove_file(&pdev->dev, &dev_attr_bandwidth_allocation); + kfree(adapter->bandwidth_allocation); #endif } @@ -2088,6 +2119,123 @@ void igb_configure_tx_ring(struct igb_ad wr32(E1000_TXDCTL(reg_idx), txdctl); } +#ifdef CONFIG_PCI_IOV +static void igb_disable_bandwidth_allocation_vf(struct e1000_hw *hw, int vf) +{ + wr32(E1000_VMBASEL, vf); + wr32(E1000_VMBAC, 0); +} + +static void igb_disable_bandwidth_allocation(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + + for (i = 0; i < adapter->vfs_allocated_count; i++) + igb_disable_bandwidth_allocation_vf(hw, i); +} + +static void igb_enable_bandwidth_allocation_vf(struct e1000_hw *hw, int vf, + unsigned int allocation) +{ + u32 rq; + + /* Allocation is expressed as 1000ths of link speed [+] + * + * rq is calcualted as 1 / (allocation / 1000) = 1000 / allocation + * + * E1000_VMBAC_RF_INT_SHIFT and E1000_VMBAC_RF_MASK are used + * to marshal the result into the desired format: 23 bits of + * which 14 are to the right of the decimal point. + * + * [+] According to the the 82576 v2.41 datasheet rq should + * be a ratio of the link speed, however, empirically + * it appears to always be a ration of to 1Gbit/s, + * even when the link is 100Mbit/s. + */ + rq = ((1000 << E1000_VMBAC_RF_INT_SHIFT) / allocation) & + E1000_VMBAC_RF_MASK; + + wr32(E1000_VMBASEL, vf); + wr32(E1000_VMBAC, rq|E1000_VMBAC_RC_ENA); +} + +static void igb_enable_bandwidth_allocation(struct igb_adapter *adapter) +{ + u32 i, reg; + struct e1000_hw *hw = &adapter->hw; + + /* Only enable bandwidth_allocation if it has been set + * and the link speed is 100Mbit/s or 1Gbit/s */ + if (!adapter->bandwidth_allocation || + (adapter->link_speed != SPEED_100 && + adapter->link_speed != SPEED_1000)) { + igb_disable_bandwidth_allocation(adapter); + return; + } + + for (i = 0; i < adapter->vfs_allocated_count; i++) { + wr32(E1000_VMBASEL, i); + if (adapter->bandwidth_allocation[i]) + igb_enable_bandwidth_allocation_vf(hw, i, + adapter->bandwidth_allocation[i]); + else + igb_disable_bandwidth_allocation_vf(hw, i); + + /* XXX: + * + * The 82576 datasheet, section 4.5.11.1.5.1 "Configuring Tx + * Bandwidth to VMs" states that the desired setting is: + * VMBAMMW.MMW_SIZE = 16 * MSS + * + * But isn't MSS a property of skbs that are using tso + * rather than adapters? + * + * If so, should we use the maximum value here? */ + /* XXX: Should this go inside or outside the for loop ? */ + reg = 64 * 16; + wr32(E1000_VMBAMMW, reg); + } +} +#endif + +static void igb_check_bandwidth_allocation(struct igb_adapter *adapter) +{ +#ifdef CONFIG_PCI_IOV + u32 vmbacs; + struct e1000_hw *hw = &adapter->hw; + + if (!adapter->vf_data) + return; + + /* The 82576 datasheet, section 4.5.11.1.5.2 "Link Speed Change + * Procedure" describes the sequence below. However the + * SPEED_CHG never seems to be set. + */ + vmbacs = rd32(E1000_VMBACS); + if (vmbacs & E1000_VMBACS_SPEED_CHG) { + /* XXX: Never seem to get here */ + int err = 0; + + if (vmbacs & E1000_VMBACS_VMBA_SET) { + igb_disable_bandwidth_allocation(adapter); + err = 1; + } + + vmbacs &= ~E1000_VMBACS_SPEED_CHG; + wr32(E1000_VMBACS, vmbacs); + + if (err) + return; + } + + spin_lock(&adapter->bandwidth_allocation_lock); + igb_enable_bandwidth_allocation(adapter); + spin_unlock(&adapter->bandwidth_allocation_lock); +#endif + return; +} + /** * igb_configure_tx - Configure transmit Unit after Reset * @adapter: board private structure @@ -2969,6 +3117,8 @@ static void igb_watchdog_task(struct wor break; } + igb_check_bandwidth_allocation(adapter); + netif_carrier_on(netdev); igb_ping_all_vfs(adapter); @@ -5854,4 +6004,101 @@ static void igb_vmm_control(struct igb_a } } +#ifdef CONFIG_PCI_IOV +static ssize_t igb_show_bandwidth_allocation(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct net_device *netdev = dev_get_drvdata(dev); + struct igb_adapter *adapter = netdev_priv(netdev); + int i; + + if (!adapter->vf_data) + return -ENOENT; + + *buf = '\0'; + for (i = 0; i < adapter->vfs_allocated_count; i++) { + if (i > 0) + strcat(buf, " "); + sprintf(buf + strlen(buf), "%i", + adapter->bandwidth_allocation[i]); + } + strcat(buf, "\n"); + + return strlen(buf); +} + +static unsigned long igb_strtoul(const char *cp, char **endp, unsigned int base) +{ + const char *orig = cp; + unsigned long x; + + while (isspace(*cp)) + cp++; + + x = simple_strtoul(cp, endp, base); + if (cp == *endp) + *endp = (char *)orig; + + return x; +} + +static ssize_t igb_set_bandwidth_allocation(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct net_device *netdev = dev_get_drvdata(dev); + struct igb_adapter *adapter = netdev_priv(netdev); + int i; + size_t len; + ssize_t status = -ENOENT; + unsigned int *new, total; + unsigned long x; + const char *p; + char *next_p; + + if (!adapter->vf_data) + return -ENOENT; + + len = adapter->vfs_allocated_count * sizeof(unsigned int); + + new = kmalloc(len, GFP_KERNEL); + if (!new) + return -ENOMEM; + + p = buf; + total = 0; + for (i = 0; i < adapter->vfs_allocated_count; i++) { + x = igb_strtoul(p, &next_p, 10); + if (p == next_p) { + dev_err(dev, "not enough values\n"); + goto err; + } + if (x > 1000) { + dev_err(dev, "value is too large\n"); + goto err; + } + new[i] = x; + total += x; + p = next_p; + } + + /* Check for trailing rubbish */ + igb_strtoul(p, &next_p, 10); + if (p != next_p) { + dev_err(dev, "trailing rubbish\n"); + goto err; + } + + spin_lock(&adapter->bandwidth_allocation_lock); + memcpy(adapter->bandwidth_allocation, new, len); + igb_enable_bandwidth_allocation(adapter); + spin_unlock(&adapter->bandwidth_allocation_lock); + + status = count; +err: + kfree(new); + return status; +} +#endif /* CONFIG_PCI_IOV */ /* igb_main.c */ Index: net-next-2.6/drivers/net/igb/e1000_regs.h =================================================================== --- net-next-2.6.orig/drivers/net/igb/e1000_regs.h 2009-11-05 03:07:08.000000000 +0900 +++ net-next-2.6/drivers/net/igb/e1000_regs.h 2009-11-05 05:01:35.000000000 +0900 @@ -308,6 +308,16 @@ #define E1000_VLVF(_n) (0x05D00 + (4 * (_n))) /* VLAN Virtual Machine * Filter - RW */ +/* Tx Bandwidth Allocation to VM Registers */ +#define E1000_VMBACS 0x03600 /* VM Bandwidth Allocation + * Control & Status - RW */ +#define E1000_VMBAMMW 0x03670 /* VM Bandwidth Allocation + * Max Memory Window - RW */ +#define E1000_VMBASEL 0x03604 /* VM Bandwidth Allocation + * Select - RW */ +#define E1000_VMBAC 0x03608 /* VM Bandwidth Allocation + * Config - RW */ + #define wr32(reg, value) (writel(value, hw->hw_addr + reg)) #define rd32(reg) (readl(hw->hw_addr + reg)) #define wrfl() ((void)rd32(E1000_STATUS)) Index: net-next-2.6/drivers/net/igb/e1000_defines.h =================================================================== --- net-next-2.6.orig/drivers/net/igb/e1000_defines.h 2009-11-05 03:07:08.000000000 +0900 +++ net-next-2.6/drivers/net/igb/e1000_defines.h 2009-11-05 05:01:35.000000000 +0900 @@ -711,4 +711,13 @@ #define E1000_VFTA_ENTRY_MASK 0x7F #define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F +/* VM Bandwidth Allocation Control & Status */ +#define E1000_VMBACS_VMBA_SET 0x00001000 +#define E1000_VMBACS_SPEED_CHG 0x80000000 + +/* VM Bandwidth Allocation Config */ +#define E1000_VMBAC_RF_INT_SHIFT 14 +#define E1000_VMBAC_RF_MASK ((1<<23)-1) /* RF_DEC and RF_INT */ +#define E1000_VMBAC_RC_ENA 0x80000000 + #endif Index: net-next-2.6/drivers/net/igb/igb.h =================================================================== --- net-next-2.6.orig/drivers/net/igb/igb.h 2009-11-05 03:07:08.000000000 +0900 +++ net-next-2.6/drivers/net/igb/igb.h 2009-11-05 05:01:35.000000000 +0900 @@ -315,6 +315,10 @@ struct igb_adapter { u16 rx_ring_count; unsigned int vfs_allocated_count; struct vf_data_storage *vf_data; +#ifdef CONFIG_PCI_IOV + unsigned int *bandwidth_allocation; + spinlock_t bandwidth_allocation_lock; +#endif }; #define IGB_FLAG_HAS_MSI (1 << 0) -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html