lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Date:	Sat, 28 Nov 2009 03:44:02 +0000
From:	Ben Hutchings <bhutchings@...arflare.com>
To:	David Miller <davem@...emloft.net>
Cc:	netdev@...r.kernel.org, linux-net-drivers@...arflare.com
Subject: [PATCH 02/32] sfc: QT202x: Reset before reading PHY id

From: Steve Hodgson <shodgson@...arflare.com>

Reading standard registers on the QT2025C before its firmware has
booted may cause the boot process to fail.  Therefore, follow the
recommended reset sequence before reading its id registers.  Either
order works for the QT2022C2, so don't differentiate.

Signed-off-by: Ben Hutchings <bhutchings@...arflare.com>
---
 drivers/net/sfc/qt202x_phy.c |   22 ++++++++--------------
 1 files changed, 8 insertions(+), 14 deletions(-)

diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
index 1b174c3..3d7370e 100644
--- a/drivers/net/sfc/qt202x_phy.c
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -138,33 +138,27 @@ static int qt202x_reset_phy(struct efx_nic *efx)
 static int qt202x_phy_init(struct efx_nic *efx)
 {
 	struct qt202x_phy_data *phy_data;
-	u32 devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
+	u32 devid;
 	int rc;
 
+	rc = qt202x_reset_phy(efx);
+	if (rc) {
+		EFX_ERR(efx, "PHY init failed\n");
+		return rc;
+	}
+
 	phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
 	if (!phy_data)
 		return -ENOMEM;
 	efx->phy_data = phy_data;
 
+	devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
 	EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
 		 devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
 		 efx_mdio_id_rev(devid));
 
 	phy_data->phy_mode = efx->phy_mode;
-
-	rc = qt202x_reset_phy(efx);
-
-	EFX_INFO(efx, "PHY init %s.\n",
-		 rc ? "failed" : "successful");
-	if (rc < 0)
-		goto fail;
-
 	return 0;
-
- fail:
-	kfree(efx->phy_data);
-	efx->phy_data = NULL;
-	return rc;
 }
 
 static int qt202x_link_ok(struct efx_nic *efx)

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists