Linux version 2.6.33-rc6-git5 (root@TM_01_C1) (gcc version 4.3.2 (Gentoo 4.3.2-r3 p1.6, pie-10.1.5) ) #3 SMP Mon Feb 8 17:39:22 UTC 2010 Command line: root=/dev/md2 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009cc00 (usable) BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dff50000 (usable) BIOS-e820: 00000000dff50000 - 00000000dff5e000 (ACPI data) BIOS-e820: 00000000dff5e000 - 00000000dff5f000 (ACPI NVS) BIOS-e820: 00000000dff5f000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000320000000 (usable) NX (Execute Disable) protection: active DMI present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) No AGP bridge found last_pfn = 0x320000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-E3FFF uncachable E4000-FFFFF write-protect MTRR variable ranges enabled: 0 base 00E0000000 mask 3FE0000000 uncachable 1 base 0000000000 mask 3E00000000 write-back 2 base 0200000000 mask 3F00000000 write-back 3 base 0300000000 mask 3FE0000000 write-back 4 disabled 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xdff50 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f6040] f6040 init_memory_mapping: 0000000000000000-00000000dff50000 0000000000 - 00dfe00000 page 2M 00dfe00000 - 00dff50000 page 4k kernel direct mapping tables up to dff50000 @ 12000-18000 init_memory_mapping: 0000000100000000-0000000320000000 0100000000 - 0320000000 page 2M kernel direct mapping tables up to 320000000 @ 16000-24000 ACPI: RSDP 00000000000f6010 00024 (v02 PTLTD ) ACPI: XSDT 00000000dff56c1e 0009C (v01 SHIMAS SDS-ONE 06040000 LTP 00000000) ACPI: FACP 00000000dff5dc26 000F4 (v03 INTEL SANCLMNT 06040000 PTL 00000003) ACPI: DSDT 00000000dff5878c 05416 (v01 Intel SANCLMNT 06040000 MSFT 03000001) ACPI: FACS 00000000dff5efc0 00040 ACPI: APIC 00000000dff5dd1a 000BC (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: MCFG 00000000dff5ddd6 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) ACPI: BOOT 00000000dff5de12 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SPCR 00000000dff5de3a 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001) ACPI: SLIC 00000000dff5de8a 00176 (v01 SHIMAS SDS-ONE 06040000 LTP 00000000) ACPI: SSDT 00000000dff5852d 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20080321) ACPI: SSDT 00000000dff58487 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20080321) ACPI: SSDT 00000000dff583e1 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20080321) ACPI: SSDT 00000000dff5833b 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20080321) ACPI: SSDT 00000000dff58295 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20080321) ACPI: SSDT 00000000dff581ef 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20080321) ACPI: SSDT 00000000dff58149 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20080321) ACPI: SSDT 00000000dff580a3 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20080321) ACPI: SSDT 00000000dff56cba 013E9 (v01 PmRef CpuPm 00003000 INTL 20080321) ACPI: Local APIC address 0xfee00000 (11 early reservations) ==> bootmem [0000000000 - 0320000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 000169b180] TEXT DATA BSS ==> [0001000000 - 000169b180] #2 [000169c000 - 000169c1b4] BRK ==> [000169c000 - 000169c1b4] #3 [00000f6050 - 0000100000] BIOS reserved ==> [00000f6050 - 0000100000] #4 [00000f6040 - 00000f6050] MP-table mpf ==> [00000f6040 - 00000f6050] #5 [000009cc00 - 000009d071] BIOS reserved ==> [000009cc00 - 000009d071] #6 [000009d255 - 00000f6040] BIOS reserved ==> [000009d255 - 00000f6040] #7 [000009d071 - 000009d255] MP-table mpc ==> [000009d071 - 000009d255] #8 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000] #9 [0000012000 - 0000016000] PGTABLE ==> [0000012000 - 0000016000] #10 [0000016000 - 000001f000] PGTABLE ==> [0000016000 - 000001f000] [ffffea0000000000-ffffea000affffff] PMD -> [ffff880028600000-ffff880032ffffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00320000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009c 0: 0x00000100 -> 0x000dff50 0: 0x00100000 -> 0x00320000 On node 0 totalpages: 3145436 DMA zone: 56 pages used for memmap DMA zone: 113 pages reserved DMA zone: 3811 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 898952 pages, LIFO batch:31 Normal zone: 30464 pages used for memmap Normal zone: 2197760 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at f0000000 (gap: f0000000:ec00000) setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff880028200000 s79704 r8192 d22696 u262144 pcpu-alloc: s79704 r8192 d22696 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3100523 Kernel command line: root=/dev/md2 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Checking aperture... No AGP bridge found Memory: 12308048k/13107200k available (3481k kernel code, 525456k absent, 272700k reserved, 2056k data, 480k init) Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:472 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 2999.651 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.30 BogoMIPS (lpj=11998604) Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 Freeing SMP alternatives: 28k freed ACPI: Core revision 20091214 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping 06 Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. Brought up 8 CPUs Total of 8 processors activated (48005.71 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-05] at [mem 0xe0000000-0xe05fffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xe05fffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored) pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:08.0: reg 10: [mem 0xfe700000-0xfe7003ff 64bit] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold pci 0000:00:08.0: PME# disabled pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f] pci 0000:00:1a.7: reg 10: [mem 0xf8600800-0xf8600bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f] pci 0000:00:1d.7: reg 10: [mem 0xf8600c00-0xf8600fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) pci 0000:00:1f.2: reg 10: [io 0x1c10-0x1c17] pci 0000:00:1f.2: reg 14: [io 0x1c04-0x1c07] pci 0000:00:1f.2: reg 18: [io 0x1c08-0x1c0f] pci 0000:00:1f.2: reg 1c: [io 0x1c00-0x1c03] pci 0000:00:1f.2: reg 20: [io 0x18a0-0x18bf] pci 0000:00:1f.2: reg 24: [mem 0xf8600000-0xf86007ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0xf8601000-0xf86010ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x1100-0x111f] pci 0000:01:00.0: reg 10: [mem 0xf8040000-0xf805ffff] pci 0000:01:00.0: reg 14: [mem 0xf8000000-0xf803ffff] pci 0000:01:00.0: reg 18: [io 0x2000-0x201f] pci 0000:01:00.0: reg 1c: [mem 0xf8060000-0xf8063fff] pci 0000:01:00.0: PME# supported from D0 D3hot pci 0000:01:00.0: PME# disabled pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xf80fffff] pci 0000:00:04.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: PCI bridge to [bus 03-03] pci 0000:04:00.0: reg 10: [mem 0xf8100000-0xf811ffff] pci 0000:04:00.0: reg 18: [io 0x3000-0x301f] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.4: PCI bridge to [bus 04-04] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.4: bridge window [mem 0xf8100000-0xf81fffff] pci 0000:05:00.0: reg 10: [mem 0xf8200000-0xf821ffff] pci 0000:05:00.0: reg 18: [io 0x4000-0x401f] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.5: PCI bridge to [bus 05-05] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.5: bridge window [mem 0xf8200000-0xf82fffff] pci 0000:06:01.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] pci 0000:06:01.0: reg 14: [io 0x5000-0x50ff] pci 0000:06:01.0: reg 18: [mem 0xf8300000-0xf830ffff] pci 0000:06:01.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:06:01.0: supports D1 D2 pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xf83fffff] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 *7 10 11 14 15) vgaarb: device added: PCI:0000:06:01.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x0600-0x063f] has been reserved system 00:01: [io 0x0800-0x080f] has been reserved system 00:01: [io 0x1000-0x107f] has been reserved system 00:01: [io 0x1180-0x11bf] has been reserved system 00:01: [io 0xfe00] has been reserved system 00:01: [mem 0xfe600000-0xfe6fffff] has been reserved system 00:01: [mem 0xe0000000-0xefffffff] has been reserved system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:01: [mem 0xfee00000-0xfee0ffff] could not be reserved system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved pci 0000:00:04.0: BAR 8: assigned [mem 0xf8400000-0xf85fffff] pci 0000:00:04.0: BAR 9: assigned [mem 0xf8700000-0xf88fffff 64bit pref] pci 0000:00:1c.0: BAR 8: assigned [mem 0xf8900000-0xf8afffff] pci 0000:00:1c.0: BAR 9: assigned [mem 0xf8b00000-0xf8cfffff 64bit pref] pci 0000:00:1c.4: BAR 9: assigned [mem 0xf8d00000-0xf8efffff 64bit pref] pci 0000:00:1c.5: BAR 9: assigned [mem 0xf8f00000-0xf90fffff 64bit pref] pci 0000:00:04.0: BAR 7: assigned [io 0x6000-0x6fff] pci 0000:00:1c.0: BAR 7: assigned [io 0x7000-0x7fff] pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xf80fffff] pci 0000:00:02.0: bridge window [mem pref disabled] pci 0000:00:04.0: PCI bridge to [bus 02-02] pci 0000:00:04.0: bridge window [io 0x6000-0x6fff] pci 0000:00:04.0: bridge window [mem 0xf8400000-0xf85fffff] pci 0000:00:04.0: bridge window [mem 0xf8700000-0xf88fffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 03-03] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff] pci 0000:00:1c.0: bridge window [mem 0xf8900000-0xf8afffff] pci 0000:00:1c.0: bridge window [mem 0xf8b00000-0xf8cfffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 04-04] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.4: bridge window [mem 0xf8100000-0xf81fffff] pci 0000:00:1c.4: bridge window [mem 0xf8d00000-0xf8efffff 64bit pref] pci 0000:00:1c.5: PCI bridge to [bus 05-05] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.5: bridge window [mem 0xf8200000-0xf82fffff] pci 0000:00:1c.5: bridge window [mem 0xf8f00000-0xf90fffff 64bit pref] pci 0000:06:01.0: BAR 6: assigned [mem 0xf8320000-0xf833ffff pref] pci 0000:00:1e.0: PCI bridge to [bus 06-06] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xf83fffff] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:04.0: setting latency timer to 64 alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf80fffff] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff] pci_bus 0000:02: resource 1 [mem 0xf8400000-0xf85fffff] pci_bus 0000:02: resource 2 [mem 0xf8700000-0xf88fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x7000-0x7fff] pci_bus 0000:03: resource 1 [mem 0xf8900000-0xf8afffff] pci_bus 0000:03: resource 2 [mem 0xf8b00000-0xf8cfffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] pci_bus 0000:04: resource 1 [mem 0xf8100000-0xf81fffff] pci_bus 0000:04: resource 2 [mem 0xf8d00000-0xf8efffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] pci_bus 0000:05: resource 1 [mem 0xf8200000-0xf82fffff] pci_bus 0000:05: resource 2 [mem 0xf8f00000-0xf90fffff 64bit pref] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff] pci_bus 0000:06: resource 1 [mem 0xf8300000-0xf83fffff] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] pci_bus 0000:06: resource 3 [io 0x0000-0xffff] pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 8192 (order: 7, 786432 bytes) UDP-Lite hash table entries: 8192 (order: 7, 786432 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Disabling L0s pci 0000:06:01.0: Boot video device PCI: CLS 32 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Simple Boot Flag at 0x39 set to 0x1 HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 24041 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:02.0: setting latency timer to 64 alloc irq_desc for 24 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:02.0: irq 24 for MSI/MSI-X pcieport 0000:00:04.0: setting latency timer to 64 alloc irq_desc for 25 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:04.0: irq 25 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 26 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.0: irq 26 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 alloc irq_desc for 27 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X pcieport 0000:00:1c.5: setting latency timer to 64 alloc irq_desc for 28 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:04.0:pcie02: AER service couldn't init device: no _OSC support input: Power Button as /class/input/input0 ACPI: Power Button [PWRB] input: Power Button as /class/input/input1 ACPI: Power Button [PWRF] Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A floppy0: no floppy controllers found brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... ide0: no devices on the port ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide1: no devices on the port ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 ide-cd driver 5.00 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 alloc irq_desc for 29 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:1f.2: irq 29 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x23 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf8600000 port 0xf8600100 irq 29 ata2: SATA max UDMA/133 abar m2048@0xf8600000 port 0xf8600180 irq 29 ata3: DUMMY ata4: DUMMY ata5: DUMMY ata6: SATA max UDMA/133 abar m2048@0xf8600000 port 0xf8600380 irq 29 e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999 - 2009 Intel Corporation. e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:04:00.0: setting latency timer to 64 alloc irq_desc for 30 on node -1 alloc kstat_irqs on node -1 e1000e 0000:04:00.0: irq 30 for MSI/MSI-X 0000:04:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:30:48:d3:33:67 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection 0000:04:00.0: eth0: MAC: 2, PHY: 2, PBA No: 0100ff-0ff e1000e 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 e1000e 0000:05:00.0: setting latency timer to 64 alloc irq_desc for 31 on node -1 alloc kstat_irqs on node -1 e1000e 0000:05:00.0: irq 31 for MSI/MSI-X 0000:05:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:30:48:d3:33:68 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection 0000:05:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.44-k2 ixgbe: Copyright (c) 1999-2010 Intel Corporation. ixgbe 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ixgbe 0000:01:00.0: setting latency timer to 64 alloc irq_desc for 32 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:01:00.0: irq 32 for MSI/MSI-X alloc irq_desc for 33 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:01:00.0: irq 33 for MSI/MSI-X alloc irq_desc for 34 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:01:00.0: irq 34 for MSI/MSI-X alloc irq_desc for 35 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:01:00.0: irq 35 for MSI/MSI-X alloc irq_desc for 36 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:01:00.0: irq 36 for MSI/MSI-X alloc irq_desc for 37 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:01:00.0: irq 37 for MSI/MSI-X alloc irq_desc for 38 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:01:00.0: irq 38 for MSI/MSI-X alloc irq_desc for 39 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:01:00.0: irq 39 for MSI/MSI-X alloc irq_desc for 40 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:01:00.0: irq 40 for MSI/MSI-X ixgbe: 0000:01:00.0: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 ixgbe 0000:01:00.0: (PCI Express:2.5Gb/s:Width x8) 00:30:48:d3:33:66 ixgbe 0000:01:00.0: MAC: 1, PHY: 0, PBA No: ffffff-0ff ixgbe 0000:01:00.0: Intel(R) 10 Gigabit Network Connection ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf8600800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8600c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001860 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001880 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: failed to enable AA(error_mask=0x1) ata1.00: ATA-8: ST3160310CS, SC14, max UDMA/133 ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: failed to enable AA(error_mask=0x1) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3160310CS SC14 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice w83697hf/hg WDT: WDT driver for W83697HF/HG initializing w83697hf/hg WDT: Looking for watchdog at address 0x2e w83697hf/hg WDT: watchdog not found at address 0x2e w83697hf/hg WDT: No W83697HF/HG could be found md: raid1 personality registered for level 1 device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver GACT probability NOT on Mirror/redirect action on u32 classifier Actions configured ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: failed to enable AA(error_mask=0x1) ata2.00: ATA-8: ST3160310CS, SC14, max UDMA/133 ata2.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) ata2.00: failed to enable AA(error_mask=0x1) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST3160310CS SC14 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sd 1:0:0:0: [sdb] Attached SCSI disk ata6: SATA link down (SStatus 0 SControl 300) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 4 and added 4 devices. md: autorun ... md: considering sdb2 ... md: adding sdb2 ... md: sdb1 has different UUID to sdb2 md: adding sda2 ... md: sda1 has different UUID to sdb2 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md2: detected capacity change from 0 to 34998452224 md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md1: detected capacity change from 0 to 1003356160 md: ... autorun DONE. md2: unknown partition table REISERFS (device md2): found reiserfs format "3.6" with standard journal REISERFS (device md2): using ordered data mode REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device md2): checking transaction log (md2) REISERFS (device md2): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 9:2. Freeing unused kernel memory: 480k freed md1: unknown partition table Unable to find swap-space signature Unable to find swap-space signature