| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 22 Feb 2010 18:56:58 -0800
From: Joe Perches <joe@...ches.com>
To: David Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Andrew Gallatin <gallatin@...i.com>,
Brice Goglin <brice@...i.com>, linux-kernel@...r.kernel.org
Subject: [PATCH net-next 2/7] drivers/net/myri10ge: Use pr_<level> and netdev_<level>
Add #define pr_fmt(fmt)
Convert logging messages to pr_<level> and netdev_<level>
Signed-off-by: Joe Perches <joe@...ches.com>
---
drivers/net/myri10ge/myri10ge.c | 183 ++++++++++++++-------------------------
1 files changed, 67 insertions(+), 116 deletions(-)
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index c0884a9..1d14a8b 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -38,6 +38,8 @@
* Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
*************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/tcp.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
@@ -819,9 +821,7 @@ static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
if (status) {
- printk(KERN_ERR
- "myri10ge: %s: Failed to set flow control mode\n",
- mgp->dev->name);
+ netdev_err(mgp->dev, "Failed to set flow control mode\n");
return status;
}
mgp->pause = pause;
@@ -837,8 +837,7 @@ myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
if (status)
- printk(KERN_ERR "myri10ge: %s: Failed to set promisc mode\n",
- mgp->dev->name);
+ netdev_err(mgp->dev, "Failed to set promisc mode\n");
}
static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
@@ -1482,19 +1481,15 @@ static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
if (mgp->link_state == MXGEFW_LINK_UP) {
if (netif_msg_link(mgp))
- printk(KERN_INFO
- "myri10ge: %s: link up\n",
- mgp->dev->name);
+ netdev_info(mgp->dev, "link up\n");
netif_carrier_on(mgp->dev);
mgp->link_changes++;
} else {
if (netif_msg_link(mgp))
- printk(KERN_INFO
- "myri10ge: %s: link %s\n",
- mgp->dev->name,
- (link_up == MXGEFW_LINK_MYRINET ?
- "mismatch (Myrinet detected)" :
- "down"));
+ netdev_info(mgp->dev, "link %s\n",
+ link_up == MXGEFW_LINK_MYRINET ?
+ "mismatch (Myrinet detected)" :
+ "down");
netif_carrier_off(mgp->dev);
mgp->link_changes++;
}
@@ -1503,9 +1498,8 @@ static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
ntohl(stats->rdma_tags_available)) {
mgp->rdma_tags_available =
ntohl(stats->rdma_tags_available);
- printk(KERN_WARNING "myri10ge: %s: RDMA timed out! "
- "%d tags left\n", mgp->dev->name,
- mgp->rdma_tags_available);
+ netdev_warn(mgp->dev, "RDMA timed out! %d tags left\n",
+ mgp->rdma_tags_available);
}
mgp->down_cnt += stats->link_down;
if (stats->link_down)
@@ -1576,8 +1570,7 @@ static irqreturn_t myri10ge_intr(int irq, void *arg)
if (send_done_count != tx->pkt_done)
myri10ge_tx_done(ss, (int)send_done_count);
if (unlikely(i > myri10ge_max_irq_loops)) {
- printk(KERN_WARNING "myri10ge: %s: irq stuck?\n",
- mgp->dev->name);
+ netdev_err(mgp->dev, "irq stuck?\n");
stats->valid = 0;
schedule_work(&mgp->watchdog_work);
}
@@ -1614,16 +1607,14 @@ myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
*/
ptr = mgp->product_code_string;
if (ptr == NULL) {
- printk(KERN_ERR "myri10ge: %s: Missing product code\n",
- netdev->name);
+ netdev_err(netdev, "Missing product code\n");
return 0;
}
for (i = 0; i < 3; i++, ptr++) {
ptr = strchr(ptr, '-');
if (ptr == NULL) {
- printk(KERN_ERR "myri10ge: %s: Invalid product "
- "code %s\n", netdev->name,
- mgp->product_code_string);
+ netdev_err(netdev, "Invalid product code %s\n",
+ mgp->product_code_string);
return 0;
}
}
@@ -2009,17 +2000,15 @@ static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
mgp->small_bytes + MXGEFW_PAD, 0);
if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
- printk(KERN_ERR
- "myri10ge: %s:slice-%d: alloced only %d small bufs\n",
- dev->name, slice, ss->rx_small.fill_cnt);
+ netdev_err(dev, "slice-%d: alloced only %d small bufs\n",
+ slice, ss->rx_small.fill_cnt);
goto abort_with_rx_small_ring;
}
myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
- printk(KERN_ERR
- "myri10ge: %s:slice-%d: alloced only %d big bufs\n",
- dev->name, slice, ss->rx_big.fill_cnt);
+ netdev_err(dev, "slice-%d: alloced only %d big bufs\n",
+ slice, ss->rx_big.fill_cnt);
goto abort_with_rx_big_ring;
}
@@ -2358,7 +2347,7 @@ static int myri10ge_open(struct net_device *dev)
mgp->running = MYRI10GE_ETH_STARTING;
status = myri10ge_reset(mgp);
if (status != 0) {
- printk(KERN_ERR "myri10ge: %s: failed reset\n", dev->name);
+ netdev_err(dev, "failed reset\n");
goto abort_with_nothing;
}
@@ -2370,9 +2359,7 @@ static int myri10ge_open(struct net_device *dev)
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
&cmd, 0);
if (status != 0) {
- printk(KERN_ERR
- "myri10ge: %s: failed to set number of slices\n",
- dev->name);
+ netdev_err(dev, "failed to set number of slices\n");
goto abort_with_nothing;
}
/* setup the indirection table */
@@ -2384,9 +2371,7 @@ static int myri10ge_open(struct net_device *dev)
MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
&cmd, 0);
if (status != 0) {
- printk(KERN_ERR
- "myri10ge: %s: failed to setup rss tables\n",
- dev->name);
+ netdev_err(dev, "failed to setup rss tables\n");
goto abort_with_nothing;
}
@@ -2400,9 +2385,7 @@ static int myri10ge_open(struct net_device *dev)
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
&cmd, 0);
if (status != 0) {
- printk(KERN_ERR
- "myri10ge: %s: failed to enable slices\n",
- dev->name);
+ netdev_err(dev, "failed to enable slices\n");
goto abort_with_nothing;
}
}
@@ -2450,9 +2433,7 @@ static int myri10ge_open(struct net_device *dev)
status = myri10ge_get_txrx(mgp, slice);
if (status != 0) {
- printk(KERN_ERR
- "myri10ge: %s: failed to get ring sizes or locations\n",
- dev->name);
+ netdev_err(dev, "failed to get ring sizes or locations\n");
goto abort_with_rings;
}
status = myri10ge_allocate_rings(ss);
@@ -2465,9 +2446,7 @@ static int myri10ge_open(struct net_device *dev)
if (slice == 0 || mgp->dev->real_num_tx_queues > 1)
status = myri10ge_set_stats(mgp, slice);
if (status) {
- printk(KERN_ERR
- "myri10ge: %s: Couldn't set stats DMA\n",
- dev->name);
+ netdev_err(dev, "Couldn't set stats DMA\n");
goto abort_with_rings;
}
@@ -2498,8 +2477,7 @@ static int myri10ge_open(struct net_device *dev)
status |=
myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
if (status) {
- printk(KERN_ERR "myri10ge: %s: Couldn't set buffer sizes\n",
- dev->name);
+ netdev_err(dev, "Couldn't set buffer sizes\n");
goto abort_with_rings;
}
@@ -2511,8 +2489,7 @@ static int myri10ge_open(struct net_device *dev)
cmd.data0 = 0;
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
if (status && status != -ENOSYS) {
- printk(KERN_ERR "myri10ge: %s: Couldn't set TSO mode\n",
- dev->name);
+ netdev_err(dev, "Couldn't set TSO mode\n");
goto abort_with_rings;
}
@@ -2521,8 +2498,7 @@ static int myri10ge_open(struct net_device *dev)
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
if (status) {
- printk(KERN_ERR "myri10ge: %s: Couldn't bring up link\n",
- dev->name);
+ netdev_err(dev, "Couldn't bring up link\n");
goto abort_with_rings;
}
@@ -2575,15 +2551,12 @@ static int myri10ge_close(struct net_device *dev)
status =
myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
if (status)
- printk(KERN_ERR
- "myri10ge: %s: Couldn't bring down link\n",
- dev->name);
+ netdev_err(dev, "Couldn't bring down link\n");
wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt,
HZ);
if (old_down_cnt == mgp->down_cnt)
- printk(KERN_ERR "myri10ge: %s never got down irq\n",
- dev->name);
+ netdev_err(dev, "never got down irq\n");
}
netif_tx_disable(dev);
myri10ge_free_irq(mgp);
@@ -2944,9 +2917,7 @@ abort_linearize:
idx = (idx + 1) & tx->mask;
} while (idx != last_idx);
if (skb_is_gso(skb)) {
- printk(KERN_ERR
- "myri10ge: %s: TSO but wanted to linearize?!?!?\n",
- mgp->dev->name);
+ netdev_err(mgp->dev, "TSO but wanted to linearize?!?!?\n");
goto drop;
}
@@ -3043,8 +3014,8 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
if (err != 0) {
- printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI,"
- " error status: %d\n", dev->name, err);
+ netdev_err(dev, "Failed MXGEFW_ENABLE_ALLMULTI, error status: %d\n",
+ err);
goto abort;
}
@@ -3058,9 +3029,8 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
&cmd, 1);
if (err != 0) {
- printk(KERN_ERR
- "myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS"
- ", error status: %d\n", dev->name, err);
+ netdev_err(dev, "Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, error status: %d\n",
+ err);
goto abort;
}
@@ -3073,18 +3043,16 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
&cmd, 1);
if (err != 0) {
- printk(KERN_ERR "myri10ge: %s: Failed "
- "MXGEFW_JOIN_MULTICAST_GROUP, error status:"
- "%d\t", dev->name, err);
- printk(KERN_ERR "MAC %pM\n", mc_list->dmi_addr);
+ netdev_err(dev, "Failed MXGEFW_JOIN_MULTICAST_GROUP, error status:%d %pM\n",
+ err, mc_list->dmi_addr);
goto abort;
}
}
/* Enable multicast filtering */
err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
if (err != 0) {
- printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI,"
- "error status: %d\n", dev->name, err);
+ netdev_err(dev, "Failed MXGEFW_DISABLE_ALLMULTI, error status: %d\n",
+ err);
goto abort;
}
@@ -3105,9 +3073,8 @@ static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
status = myri10ge_update_mac_address(mgp, sa->sa_data);
if (status != 0) {
- printk(KERN_ERR
- "myri10ge: %s: changing mac address failed with %d\n",
- dev->name, status);
+ netdev_err(dev, "changing mac address failed with %d\n",
+ status);
return status;
}
@@ -3122,12 +3089,10 @@ static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
int error = 0;
if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) {
- printk(KERN_ERR "myri10ge: %s: new mtu (%d) is not valid\n",
- dev->name, new_mtu);
+ netdev_err(dev, "new mtu (%d) is not valid\n", new_mtu);
return -EINVAL;
}
- printk(KERN_INFO "%s: changing mtu from %d to %d\n",
- dev->name, dev->mtu, new_mtu);
+ netdev_info(dev, "changing mtu from %d to %d\n", dev->mtu, new_mtu);
if (mgp->running) {
/* if we change the mtu on an active device, we must
* reset the device so the firmware sees the change */
@@ -3356,7 +3321,7 @@ static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
netif_device_detach(netdev);
if (netif_running(netdev)) {
- printk(KERN_INFO "myri10ge: closing %s\n", netdev->name);
+ netdev_info(netdev, "closing\n");
rtnl_lock();
myri10ge_close(netdev);
rtnl_unlock();
@@ -3383,8 +3348,7 @@ static int myri10ge_resume(struct pci_dev *pdev)
msleep(5); /* give card time to respond */
pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
if (vendor == 0xffff) {
- printk(KERN_ERR "myri10ge: %s: device disappeared!\n",
- mgp->dev->name);
+ netdev_err(mgp->dev, "device disappeared!\n");
return -EIO;
}
@@ -3463,10 +3427,9 @@ static void myri10ge_watchdog(struct work_struct *work)
* if the card rebooted due to a parity error
* For now, just report it */
reboot = myri10ge_read_reboot(mgp);
- printk(KERN_ERR
- "myri10ge: %s: NIC rebooted (0x%x),%s resetting\n",
- mgp->dev->name, reboot,
- myri10ge_reset_recover ? " " : " not");
+ netdev_err(mgp->dev, "NIC rebooted (0x%x),%s resetting\n",
+ reboot,
+ myri10ge_reset_recover ? "" : " not");
if (myri10ge_reset_recover == 0)
return;
rtnl_lock();
@@ -3494,31 +3457,26 @@ static void myri10ge_watchdog(struct work_struct *work)
if (cmd == 0xffff) {
pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
if (vendor == 0xffff) {
- printk(KERN_ERR
- "myri10ge: %s: device disappeared!\n",
- mgp->dev->name);
+ netdev_err(mgp->dev, "device disappeared!\n");
return;
}
}
/* Perhaps it is a software error. Try to reset */
- printk(KERN_ERR "myri10ge: %s: device timeout, resetting\n",
- mgp->dev->name);
+ netdev_err(mgp->dev, "device timeout, resetting\n");
for (i = 0; i < mgp->num_slices; i++) {
tx = &mgp->ss[i].tx;
- printk(KERN_INFO
- "myri10ge: %s: (%d): %d %d %d %d %d %d\n",
- mgp->dev->name, i, tx->queue_active, tx->req,
- tx->done, tx->pkt_start, tx->pkt_done,
- (int)ntohl(mgp->ss[i].fw_stats->
- send_done_count));
+ netdev_err(mgp->dev, "(%d): %d %d %d %d %d %d\n",
+ i, tx->queue_active, tx->req,
+ tx->done, tx->pkt_start, tx->pkt_done,
+ (int)ntohl(mgp->ss[i].fw_stats->
+ send_done_count));
msleep(2000);
- printk(KERN_INFO
- "myri10ge: %s: (%d): %d %d %d %d %d %d\n",
- mgp->dev->name, i, tx->queue_active, tx->req,
- tx->done, tx->pkt_start, tx->pkt_done,
- (int)ntohl(mgp->ss[i].fw_stats->
- send_done_count));
+ netdev_info(mgp->dev, "(%d): %d %d %d %d %d %d\n",
+ i, tx->queue_active, tx->req,
+ tx->done, tx->pkt_start, tx->pkt_done,
+ (int)ntohl(mgp->ss[i].fw_stats->
+ send_done_count));
}
}
@@ -3528,8 +3486,7 @@ static void myri10ge_watchdog(struct work_struct *work)
}
status = myri10ge_load_firmware(mgp, 1);
if (status != 0)
- printk(KERN_ERR "myri10ge: %s: failed to load firmware\n",
- mgp->dev->name);
+ netdev_err(mgp->dev, "failed to load firmware\n");
else
myri10ge_open(mgp->dev);
rtnl_unlock();
@@ -3580,14 +3537,10 @@ static void myri10ge_watchdog_timer(unsigned long arg)
/* nic seems like it might be stuck.. */
if (rx_pause_cnt != mgp->watchdog_pause) {
if (net_ratelimit())
- printk(KERN_WARNING
- "myri10ge %s slice %d:"
- "TX paused, check link partner\n",
- mgp->dev->name, i);
+ netdev_err(mgp->dev, "slice %d: TX paused, check link partner\n",
+ i);
} else {
- printk(KERN_WARNING
- "myri10ge %s slice %d stuck:",
- mgp->dev->name, i);
+ netdev_warn(mgp->dev, "slice %d stuck:", i);
reset_needed = 1;
}
}
@@ -4127,13 +4080,11 @@ static struct notifier_block myri10ge_dca_notifier = {
static __init int myri10ge_init_module(void)
{
- printk(KERN_INFO "%s: Version %s\n", myri10ge_driver.name,
- MYRI10GE_VERSION_STR);
+ pr_info("Version %s\n", MYRI10GE_VERSION_STR);
if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
- printk(KERN_ERR
- "%s: Illegal rssh hash type %d, defaulting to source port\n",
- myri10ge_driver.name, myri10ge_rss_hash);
+ pr_err("Illegal rssh hash type %d, defaulting to source port\n",
+ myri10ge_rss_hash);
myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
}
#ifdef CONFIG_MYRI10GE_DCA
--
1.7.0.14.g7e948
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists