Add support for reading the MAC address from the system registers if there is an EEPROM present. This involves caching the KS_CCR register for later use (will also be useful for ETHTOOL support) and adding a print to say that there is an EEPROM present. Signed-off-by: Ben Dooks --- --- drivers/net/ks8851.c | 46 +++++++++++++++++++++++++++++++++++++++------- 1 file changed, 39 insertions(+), 7 deletions(-) Index: b/drivers/net/ks8851.c =================================================================== --- a/drivers/net/ks8851.c 2010-04-29 00:51:12.489525834 +0900 +++ b/drivers/net/ks8851.c 2010-04-29 00:52:02.377026762 +0900 @@ -76,6 +76,7 @@ union ks8851_tx_hdr { * @msg_enable: The message flags controlling driver output (see ethtool). * @fid: Incrementing frame id tag. * @rc_ier: Cached copy of KS_IER. + * @rc_ccr: Cached copy of KS_CCR. * @rc_rxqcr: Cached copy of KS_RXQCR. * * The @lock ensures that the chip is protected when certain operations are @@ -107,6 +108,7 @@ struct ks8851_net { u16 rc_ier; u16 rc_rxqcr; + u16 rc_ccr; struct mii_if_info mii; struct ks8851_rxctrl rxctrl; @@ -367,21 +369,47 @@ static int ks8851_write_mac_addr(struct } /** + * ks8851_read_mac_addr - read mac address from device registers + * @dev: The network device + * + * Update our copy of the KS8851 MAC address from the registers of @dev. +*/ +static void ks8851_read_mac_addr(struct net_device *dev) +{ + struct ks8851_net *ks = netdev_priv(dev); + int i; + + mutex_lock(&ks->lock); + + for (i = 0; i < ETH_ALEN; i++) + dev->dev_addr[i] = ks8851_rdreg8(ks, KS_MAR(i)); + + mutex_unlock(&ks->lock); +} + +/** * ks8851_init_mac - initialise the mac address * @ks: The device structure * * Get or create the initial mac address for the device and then set that - * into the station address register. Currently we assume that the device - * does not have a valid mac address in it, and so we use random_ether_addr() + * into the station address register. If there is an EEPROM present, then + * we try that. If no valid mac address is found we use random_ether_addr() * to create a new one. - * - * In future, the driver should check to see if the device has an EEPROM - * attached and whether that has a valid ethernet address in it. */ static void ks8851_init_mac(struct ks8851_net *ks) { struct net_device *dev = ks->netdev; + /* first, try reading what we've got already */ + if (ks->rc_ccr & CCR_EEPROM) { + ks8851_read_mac_addr(dev); + if (is_valid_ether_addr(dev->dev_addr)) + return; + + ks_err(ks, "invalid mac address read %pM\n", + dev->dev_addr); + } + random_ether_addr(dev->dev_addr); ks8851_write_mac_addr(dev); } @@ -1288,6 +1316,9 @@ static int __devinit ks8851_probe(struct goto err_id; } + /* cache the contents of the CCR register for EEPROM, etc. */ + ks->rc_ccr = ks8851_rdreg16(ks, KS_CCR); + ks8851_read_selftest(ks); ks8851_init_mac(ks); ks->tx_space = ks8851_rdreg16(ks, KS_TXMIR); @@ -1305,9 +1336,10 @@ static int __devinit ks8851_probe(struct goto err_netdev; } - dev_info(&spi->dev, "revision %d, MAC %pM, IRQ %d\n", + dev_info(&spi->dev, "revision %d, MAC %pM, IRQ %d, %s EEPROM\n", CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)), - ndev->dev_addr, ndev->irq); + ndev->dev_addr, ndev->irq, + ks->rc_ccr & CCR_EEPROM ? "has" : "no"); return 0; -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html