| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 24 May 2010 10:31:05 +0300
From: Baruch Siach <baruch@...s.co.il>
To: David Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Baruch Siach <baruch@...s.co.il>,
Sascha Hauer <s.hauer@...gutronix.de>
Subject: [PATCH] fec: add support for PHY interface platform data
The i.MX25 PDK uses RMII to communicate with its PHY. This patch adds the
ability to configure RMII, based on platform data.
Signed-off-by: Baruch Siach <baruch@...s.co.il>
Acked-by: Greg Ungerer <gerg@...inux.org>
Cc: Sascha Hauer <s.hauer@...gutronix.de>
---
drivers/net/fec.c | 22 ++++++++++++++++++++++
drivers/net/fec.h | 2 ++
include/linux/fec.h | 21 +++++++++++++++++++++
3 files changed, 45 insertions(+), 0 deletions(-)
create mode 100644 include/linux/fec.h
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 42d9ac9..326465f 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -41,6 +41,7 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
+#include <linux/fec.h>
#include <asm/cacheflush.h>
@@ -182,6 +183,7 @@ struct fec_enet_private {
struct phy_device *phy_dev;
int mii_timeout;
uint phy_speed;
+ phy_interface_t phy_interface;
int index;
int link;
int full_duplex;
@@ -1191,6 +1193,21 @@ fec_restart(struct net_device *dev, int duplex)
/* Set MII speed */
writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
+#ifdef FEC_MIIGSK_ENR
+ if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) {
+ /* disable the gasket and wait */
+ writel(0, fep->hwp + FEC_MIIGSK_ENR);
+ while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
+ udelay(1);
+
+ /* configure the gasket: RMII, 50 MHz, no loopback, no echo */
+ writel(1, fep->hwp + FEC_MIIGSK_CFGR);
+
+ /* re-enable the gasket */
+ writel(2, fep->hwp + FEC_MIIGSK_ENR);
+ }
+#endif
+
/* And last, enable the transmit and receive processing */
writel(2, fep->hwp + FEC_ECNTRL);
writel(0, fep->hwp + FEC_R_DES_ACTIVE);
@@ -1226,6 +1243,7 @@ static int __devinit
fec_probe(struct platform_device *pdev)
{
struct fec_enet_private *fep;
+ struct fec_platform_data *pdata;
struct net_device *ndev;
int i, irq, ret = 0;
struct resource *r;
@@ -1259,6 +1277,10 @@ fec_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, ndev);
+ pdata = pdev->dev.platform_data;
+ if (pdata)
+ fep->phy_interface = pdata->phy;
+
/* This device has up to three irqs on some platforms */
for (i = 0; i < 3; i++) {
irq = platform_get_irq(pdev, i);
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index cc47f3f..2c48b25 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -43,6 +43,8 @@
#define FEC_R_DES_START 0x180 /* Receive descriptor ring */
#define FEC_X_DES_START 0x184 /* Transmit descriptor ring */
#define FEC_R_BUFF_SIZE 0x188 /* Maximum receive buff size */
+#define FEC_MIIGSK_CFGR 0x300 /* MIIGSK Configuration reg */
+#define FEC_MIIGSK_ENR 0x308 /* MIIGSK Enable reg */
#else
diff --git a/include/linux/fec.h b/include/linux/fec.h
new file mode 100644
index 0000000..5d3523d
--- /dev/null
+++ b/include/linux/fec.h
@@ -0,0 +1,21 @@
+/* include/linux/fec.h
+ *
+ * Copyright (c) 2009 Orex Computed Radiography
+ * Baruch Siach <baruch@...s.co.il>
+ *
+ * Header file for the FEC platform data
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_FEC_H__
+#define __LINUX_FEC_H__
+
+#include <linux/phy.h>
+
+struct fec_platform_data {
+ phy_interface_t phy;
+};
+
+#endif
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists