| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 11 Jun 2010 14:47:35 +0200
From: Jonas Bonn <jonas@...thpole.se>
To: netdev@...r.kernel.org
Cc: Jonas Bonn <jonas@...thpole.se>
Subject: [PATCH 2/7] ethoc: Write bus addresses to registers
The ethoc driver should be writing bus addresses to the ethoc registers, not
virtual addresses. This patch adds an array to store the virtual addresses
in and references that array when manipulating the contents of the buffer
descriptors.
Signed-off-by: Jonas Bonn <jonas@...thpole.se>
---
drivers/net/ethoc.c | 27 ++++++++++++++++++++++-----
1 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index 68093cf..5904ad2 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -180,6 +180,7 @@ MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size");
* @dty_tx: last buffer actually sent
* @num_rx: number of receive buffers
* @cur_rx: current receive buffer
+ * @vma: pointer to array of virtual memory addresses for buffers
* @netdev: pointer to network device structure
* @napi: NAPI structure
* @stats: network device statistics
@@ -203,6 +204,8 @@ struct ethoc {
unsigned int num_rx;
unsigned int cur_rx;
+ void** vma;
+
struct net_device *netdev;
struct napi_struct napi;
struct net_device_stats stats;
@@ -285,18 +288,20 @@ static inline void ethoc_disable_rx_and_tx(struct ethoc *dev)
ethoc_write(dev, MODER, mode);
}
-static int ethoc_init_ring(struct ethoc *dev)
+static int ethoc_init_ring(struct ethoc *dev, void* mem_start)
{
struct ethoc_bd bd;
int i;
+ void* vma;
dev->cur_tx = 0;
dev->dty_tx = 0;
dev->cur_rx = 0;
/* setup transmission buffers */
- bd.addr = virt_to_phys(dev->membase);
+ bd.addr = mem_start;
bd.stat = TX_BD_IRQ | TX_BD_CRC;
+ vma = dev->membase;
for (i = 0; i < dev->num_tx; i++) {
if (i == dev->num_tx - 1)
@@ -304,6 +309,9 @@ static int ethoc_init_ring(struct ethoc *dev)
ethoc_write_bd(dev, i, &bd);
bd.addr += ETHOC_BUFSIZ;
+
+ dev->vma[i] = vma;
+ vma += ETHOC_BUFSIZ;
}
bd.stat = RX_BD_EMPTY | RX_BD_IRQ;
@@ -314,6 +322,9 @@ static int ethoc_init_ring(struct ethoc *dev)
ethoc_write_bd(dev, dev->num_tx + i, &bd);
bd.addr += ETHOC_BUFSIZ;
+
+ dev->vma[dev->num_tx + i] = vma;
+ vma += ETHOC_BUFSIZ;
}
return 0;
@@ -415,7 +426,7 @@ static int ethoc_rx(struct net_device *dev, int limit)
skb = netdev_alloc_skb_ip_align(dev, size);
if (likely(skb)) {
- void *src = phys_to_virt(bd.addr);
+ void *src = priv->vma[entry];
memcpy_fromio(skb_put(skb, size), src, size);
skb->protocol = eth_type_trans(skb, dev);
priv->stats.rx_packets++;
@@ -667,7 +678,7 @@ static int ethoc_open(struct net_device *dev)
ethoc_write(priv, TX_BD_NUM, priv->num_tx);
- ethoc_init_ring(priv);
+ ethoc_init_ring(priv, (void*)dev->mem_start);
ethoc_reset(priv);
if (netif_queue_stopped(dev)) {
@@ -831,7 +842,7 @@ static netdev_tx_t ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev)
else
bd.stat &= ~TX_BD_PAD;
- dest = phys_to_virt(bd.addr);
+ dest = priv->vma[entry];
memcpy_toio(dest, skb->data, skb->len);
bd.stat &= ~(TX_BD_STATS | TX_BD_LEN_MASK);
@@ -978,6 +989,12 @@ static int ethoc_probe(struct platform_device *pdev)
priv->num_tx = max(2, num_bd / 4);
priv->num_rx = num_bd - priv->num_tx;
+ priv->vma = devm_kzalloc(&pdev->dev, num_bd*sizeof(void*), GFP_KERNEL);
+ if (!priv->vma) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
/* Allow the platform setup code to pass in a MAC address. */
if (pdev->dev.platform_data) {
struct ethoc_platform_data *pdata =
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists