[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Sun, 27 Jun 2010 20:47:11 +0300
From: Maxim Levitsky <maximlevitsky@...il.com>
To: "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [REGRESSION] e1000e stopped working
On Sun, 2010-06-27 at 20:43 +0300, Maxim Levitsky wrote:
> On Sun, 2010-06-27 at 20:29 +0300, Maxim Levitsky wrote:
> > On Sun, 2010-06-27 at 20:27 +0300, Maxim Levitsky wrote:
> > > Just that,
> > >
> > > It doesn't receive anything from my internet router during DHCP.
> > >
> > >
> > > 00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02)
> > > Subsystem: Intel Corporation Device [8086:0001]
> > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > > Latency: 0
> > > Interrupt: pin A routed to IRQ 47
> > > Region 0: Memory at 50300000 (32-bit, non-prefetchable) [size=128K]
> > > Region 1: Memory at 50324000 (32-bit, non-prefetchable) [size=4K]
> > > Region 2: I/O ports at 30e0 [size=32]
> > > Capabilities: [c8] Power Management version 2
> > > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > > Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> > > Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
> > > Address: 00000000fee0100c Data: 41c9
> > > Kernel driver in use: e1000e
> > > Kernel modules: e1000e
> > >
> > > I use vanilla tree, commit bf2937695fe2330bfd8933a2310e7bdd2581dc2e
> > >
> > >
> > > Best regards,
> > > Maxim Levitsky
> > >
> >
> > It appears to work now after reboot.
> > Will keep a look for this.
> >
> > Disregard for now.
>
>
> Just s2ram cycle, problem is back.
> Did full reboot (power off then on), same thing card doesn't work...
>
Yep, s2ram sometimes 'fixes', sometimes breaks the card.
Something got broken in device initialization path.
Best regards,
Maxim Levitsky
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists