netdev - Re: [RFC][net-next-2.6 PATCH 2/4] net: 8021Q consolidate header

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 04 Nov 2010 06:43:31 -0700
From:	John Fastabend <john.r.fastabend@...el.com>
To:	Jesse Gross <jesse@...ira.com>
CC:	"netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [RFC][net-next-2.6 PATCH 2/4] net: 8021Q consolidate header_ops
 routines

On 11/3/2010 5:47 PM, Jesse Gross wrote:
> On Thu, Oct 21, 2010 at 3:10 PM, John Fastabend
> <john.r.fastabend@...el.com> wrote:
>> The only thing the 8021Q header ops routines are required
>> for is the VLAN_FLAG_REORDER_HDR otherwise by the time
>> the VLAN tag has been added the packet is already on
>> its way down the stack. In this case using the Ethernet
>> ops works OK.
>>
>> At present the VLAN_FLAG_REORDER_HDR flag does not work
>> with vlan offloads. As I understand the flag the intent
>> is to allow taps on the vlan device and possibly the
>> QOS layer to see the vlan tag info.
>>
>> By inserting the tag in vlan_tci any taps or QOS policies
>> should be able to retrieve the vlan info. This allows
>> the flag to work the same in both the offload case and
>> non-offloaded case. And allows us to use the underlying
>> ethernet ops.
>>
>> Signed-off-by: John Fastabend <john.r.fastabend@...el.com>
> 
> I noticed that you dropped this patch from your most recent series, so
> I went back to take a look at it.  I realized that it probably works
> inconsistently since header caching doesn't take into account
> skb->vlan_tci, so whether you see the tag depends on the state of the
> cache.
> 
> It would be really good to have this type of code consolidation, both
> for the sake of sanity and to eliminate the inconsistent behavior.  We
> could do that by either not using header caching or making it work
> with vlan offloading somehow.  However, I'm not sure that there's
> really much point in that.  VLAN_FLAG_REORDER_HDR doesn't work with
> cards that do vlan offloading, which is a pretty significant number of
> them.  It similarly works inconsistently on the rx side.  So it's
> broken most of the time and worse, the behavior changes depending on
> the NIC (and now the ethtool setting).  Can we just eliminate it?

Yes this is why I have dropped it for now. Also rebuild is broke as best I can tell. Although I doubt anyone would notice you would need to clear VLAN_FLAG_REORDER_HDR and be using one of the ARPHRD_{ROSE|AX25|NETROM}.

The problem with caching the vlan header is the skb priority to vlan priority map. So we could cache the vid, sa, da, and protocols but I can not see anyway to cache the vlan priority. Also the cache would have to be flushed when the flag is toggled.

Thanks,
John.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html