Date:	Mon, 6 Dec 2010 22:27:03 +0100
From:	Michael Leun <lkml20101129@...ton.leun.net>
To:	Jesse Gross <jesse@...ira.com>
Cc:	Eric Dumazet <eric.dumazet@...il.com>,
	David Miller <davem@...emloft.net>,
	Ben Greear <greearb@...delatech.com>,
	linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: [PATCH 2.6.36] vlan: Avoid hwaccel vlan packets when vid not
 used

On Mon, 6 Dec 2010 12:04:48 -0800
Jesse Gross <jesse@...ira.com> wrote:

> On Mon, Dec 6, 2010 at 11:34 AM, Michael Leun
> <lkml20101129@...ton.leun.net> wrote:
> > On Mon, 6 Dec 2010 10:14:55 -0800
> > Jesse Gross <jesse@...ira.com> wrote:
> >
> >> On Sun, Dec 5, 2010 at 2:44 AM, Michael Leun
> >> <lkml20101129@...ton.leun.net> wrote:
> >> > Hi Jesse,
> >> >
> >> > On Sun, 5 Dec 2010 10:55:28 +0100
> >> > Michael Leun <lkml20101129@...ton.leun.net> wrote:
> >> >
> >> >> On Sun, 05 Dec 2010 09:03:53 +0100
> >> >> Eric Dumazet <eric.dumazet@...il.com> wrote:
> >> >>
> >> >> > > But on
> >> >> > >
> >> >> > > hpdl320g5:/home/ml # lspci | grep Eth
> >> >> > > 03:04.0 Ethernet controller: Broadcom Corporation NetXtreme
> >> >> > > BCM5714 Gigabit Ethernet (rev a3) 03:04.1 Ethernet
> >> >> > > controller: Broadcom Corporation NetXtreme BCM5714 Gigabit
> >> >> > > Ethernet (rev a3)
> >> >> > >
> >> >> > > the good message is that it also does not crash, but with
> >> >> > > tcpdump I see vlan tags when no vlan devices configured on
> >> >> > > the respective eth, if so I do not see tags anymore vlan
> >> >> > > tags on the trunk interface.
> >> >> > >
> >> >> >
> >> >> > For all these very specific needs, you'll have to try 2.6.37
> >> >> > I am afraid. Jesse did huge changes to exactly make this
> >> >> > working, we wont backport this to 2.6.36, but only avoid
> >> >> > crashes.
> >> >>
> >> >> OK, I'm perfectly fine with that, of course, actually nice to
> >> >> hear that the issue already is addressed.
> >> >>
> >> >> Likely I'll give some rc an shot on this machine (maybe over
> >> >> christmas), but it is an production machine (acutally testing
> >> >> other devices is the "product" produced on this machine), so
> >> >> unfortunately I'm not that free in when and what I can do (but
> >> >> the possibility to, for example, bridge the trunk interface
> >> >> would make testing easier, that justifies something...).
> >> >>
> >> >> Thank you all very much for your work.
> >> >
> >> > Are these changes already in 2.6.37-rc4? Or, if not are they
> >> > somewhere publically available already?
> >> >
> >> > I looked into various changelogs but have some difficulties to
> >> > identify them...
> >> >
> >> > Maybe I have some time next days to give them an try...
> >>
> >> Yes, all of the existing vlan changes are in 2.6.37-rc4.  There
> >> were a number of patches but the main one was
> >> 3701e51382a026cba10c60b03efabe534fba4ca4
> >
> > Then, I'm afraid, this (seeing vlan tags even if vlan interfaces are
> > configured) does not work on HP DL320G5 (for exact description and
> > examples please see my mail a few days ago).
> 
> What driver are you using?  Is it tg3?
> 
> The vlan changes that I made unfortunately require updating drivers to
> get the full benefit.  I've been busy lately so tg3 hasn't yet been
> updated.
> 
> I know that tg3 does some things differently depending on whether a
> vlan group is configured, so that would likely be the cause of what
> you are seeing.  I'd have to look at it in more detail to be sure
> though.
> 
> You said that everything works on the other Broadcom NIC that you
> tested?  Maybe it uses bnx2 instead?
> 

Both machines use tg3 / 2.6.36.1 - one is opensuse, one ubuntu (but
this should not matter, I think).

If I can do anything to support your investigations / work (most
likely testing / providing information) please let me know.

-- 
MfG,

Michael Leun

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists