| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 6 Jan 2011 16:29:59 -0800
From: jeffrey.t.kirsher@...el.com
To: davem@...emloft.net
Cc: Alexander Duyck <alexander.h.duyck@...el.com>,
netdev@...r.kernel.org, gosp@...hat.com, bphilips@...ell.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 12/12] ixgbe: update ntuple filter configuration
From: Alexander Duyck <alexander.h.duyck@...el.com>
This change fixes several issues found in ntuple filtering while I was
doing the ATR refactor.
Specifically I updated the masks to work correctly with the latest version
of ethtool, I cleaned up the exception handling and added detailed error
output when a filter is rejected, and corrected several bits that were set
incorrectly in ixgbe_type.h.
The previous version of this patch included a printk that was left over from
me fixing the filter setup. This patch does not include that printk.
Signed-off-by: Alexander Duyck <alexander.h.duyck@...el.com>
Tested-by: Stephen Ko <stephen.s.ko@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ixgbe/ixgbe.h | 14 --
drivers/net/ixgbe/ixgbe_82599.c | 436 ++++++++++++-------------------------
drivers/net/ixgbe/ixgbe_ethtool.c | 134 ++++++++----
drivers/net/ixgbe/ixgbe_main.c | 21 +-
drivers/net/ixgbe/ixgbe_type.h | 16 +-
5 files changed, 250 insertions(+), 371 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 341b3db..3b8c924 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -533,20 +533,6 @@ extern s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
union ixgbe_atr_input *input,
struct ixgbe_atr_input_masks *input_masks,
u16 soft_id, u8 queue);
-extern s32 ixgbe_atr_set_vlan_id_82599(union ixgbe_atr_input *input,
- u16 vlan_id);
-extern s32 ixgbe_atr_set_src_ipv4_82599(union ixgbe_atr_input *input,
- u32 src_addr);
-extern s32 ixgbe_atr_set_dst_ipv4_82599(union ixgbe_atr_input *input,
- u32 dst_addr);
-extern s32 ixgbe_atr_set_src_port_82599(union ixgbe_atr_input *input,
- u16 src_port);
-extern s32 ixgbe_atr_set_dst_port_82599(union ixgbe_atr_input *input,
- u16 dst_port);
-extern s32 ixgbe_atr_set_flex_byte_82599(union ixgbe_atr_input *input,
- u16 flex_byte);
-extern s32 ixgbe_atr_set_l4type_82599(union ixgbe_atr_input *input,
- u8 l4type);
extern void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter,
struct ixgbe_ring *ring);
extern void ixgbe_clear_rscctl(struct ixgbe_adapter *adapter,
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index d41931f..8d316d9 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -1422,211 +1422,6 @@ static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
}
/**
- * ixgbe_atr_set_vlan_id_82599 - Sets the VLAN id in the ATR input stream
- * @input: input stream to modify
- * @vlan: the VLAN id to load
- **/
-s32 ixgbe_atr_set_vlan_id_82599(union ixgbe_atr_input *input, __be16 vlan)
-{
- input->formatted.vlan_id = vlan;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_set_src_ipv4_82599 - Sets the source IPv4 address
- * @input: input stream to modify
- * @src_addr: the IP address to load
- **/
-s32 ixgbe_atr_set_src_ipv4_82599(union ixgbe_atr_input *input, __be32 src_addr)
-{
- input->formatted.src_ip[0] = src_addr;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_set_dst_ipv4_82599 - Sets the destination IPv4 address
- * @input: input stream to modify
- * @dst_addr: the IP address to load
- **/
-s32 ixgbe_atr_set_dst_ipv4_82599(union ixgbe_atr_input *input, __be32 dst_addr)
-{
- input->formatted.dst_ip[0] = dst_addr;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_set_src_port_82599 - Sets the source port
- * @input: input stream to modify
- * @src_port: the source port to load
- **/
-s32 ixgbe_atr_set_src_port_82599(union ixgbe_atr_input *input, __be16 src_port)
-{
- input->formatted.src_port = src_port;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_set_dst_port_82599 - Sets the destination port
- * @input: input stream to modify
- * @dst_port: the destination port to load
- **/
-s32 ixgbe_atr_set_dst_port_82599(union ixgbe_atr_input *input, __be16 dst_port)
-{
- input->formatted.dst_port = dst_port;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_set_flex_byte_82599 - Sets the flexible bytes
- * @input: input stream to modify
- * @flex_bytes: the flexible bytes to load
- **/
-s32 ixgbe_atr_set_flex_byte_82599(union ixgbe_atr_input *input,
- __be16 flex_bytes)
-{
- input->formatted.flex_bytes = flex_bytes;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_set_l4type_82599 - Sets the layer 4 packet type
- * @input: input stream to modify
- * @l4type: the layer 4 type value to load
- **/
-s32 ixgbe_atr_set_l4type_82599(union ixgbe_atr_input *input, u8 l4type)
-{
- input->formatted.flow_type = l4type;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_get_vlan_id_82599 - Gets the VLAN id from the ATR input stream
- * @input: input stream to search
- * @vlan: the VLAN id to load
- **/
-static s32 ixgbe_atr_get_vlan_id_82599(union ixgbe_atr_input *input, __be16 *vlan)
-{
- *vlan = input->formatted.vlan_id;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_get_src_ipv4_82599 - Gets the source IPv4 address
- * @input: input stream to search
- * @src_addr: the IP address to load
- **/
-static s32 ixgbe_atr_get_src_ipv4_82599(union ixgbe_atr_input *input,
- __be32 *src_addr)
-{
- *src_addr = input->formatted.src_ip[0];
-
- return 0;
-}
-
-/**
- * ixgbe_atr_get_dst_ipv4_82599 - Gets the destination IPv4 address
- * @input: input stream to search
- * @dst_addr: the IP address to load
- **/
-static s32 ixgbe_atr_get_dst_ipv4_82599(union ixgbe_atr_input *input,
- __be32 *dst_addr)
-{
- *dst_addr = input->formatted.dst_ip[0];
-
- return 0;
-}
-
-/**
- * ixgbe_atr_get_src_ipv6_82599 - Gets the source IPv6 address
- * @input: input stream to search
- * @src_addr_1: the first 4 bytes of the IP address to load
- * @src_addr_2: the second 4 bytes of the IP address to load
- * @src_addr_3: the third 4 bytes of the IP address to load
- * @src_addr_4: the fourth 4 bytes of the IP address to load
- **/
-static s32 ixgbe_atr_get_src_ipv6_82599(union ixgbe_atr_input *input,
- __be32 *src_addr_0, __be32 *src_addr_1,
- __be32 *src_addr_2, __be32 *src_addr_3)
-{
- *src_addr_0 = input->formatted.src_ip[0];
- *src_addr_1 = input->formatted.src_ip[1];
- *src_addr_2 = input->formatted.src_ip[2];
- *src_addr_3 = input->formatted.src_ip[3];
-
- return 0;
-}
-
-/**
- * ixgbe_atr_get_src_port_82599 - Gets the source port
- * @input: input stream to modify
- * @src_port: the source port to load
- *
- * Even though the input is given in big-endian, the FDIRPORT registers
- * expect the ports to be programmed in little-endian. Hence the need to swap
- * endianness when retrieving the data. This can be confusing since the
- * internal hash engine expects it to be big-endian.
- **/
-static s32 ixgbe_atr_get_src_port_82599(union ixgbe_atr_input *input,
- __be16 *src_port)
-{
- *src_port = input->formatted.src_port;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_get_dst_port_82599 - Gets the destination port
- * @input: input stream to modify
- * @dst_port: the destination port to load
- *
- * Even though the input is given in big-endian, the FDIRPORT registers
- * expect the ports to be programmed in little-endian. Hence the need to swap
- * endianness when retrieving the data. This can be confusing since the
- * internal hash engine expects it to be big-endian.
- **/
-static s32 ixgbe_atr_get_dst_port_82599(union ixgbe_atr_input *input,
- __be16 *dst_port)
-{
- *dst_port = input->formatted.dst_port;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_get_flex_byte_82599 - Gets the flexible bytes
- * @input: input stream to modify
- * @flex_bytes: the flexible bytes to load
- **/
-static s32 ixgbe_atr_get_flex_byte_82599(union ixgbe_atr_input *input,
- __be16 *flex_bytes)
-{
- *flex_bytes = input->formatted.flex_bytes;
-
- return 0;
-}
-
-/**
- * ixgbe_atr_get_l4type_82599 - Gets the layer 4 packet type
- * @input: input stream to modify
- * @l4type: the layer 4 type value to load
- **/
-static s32 ixgbe_atr_get_l4type_82599(union ixgbe_atr_input *input,
- u8 *l4type)
-{
- *l4type = input->formatted.flow_type;
-
- return 0;
-}
-
-/**
* ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
* @hw: pointer to hardware structure
* @input: unique input dword
@@ -1679,6 +1474,43 @@ s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
}
/**
+ * ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
+ * @input_mask: mask to be bit swapped
+ *
+ * The source and destination port masks for flow director are bit swapped
+ * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to
+ * generate a correctly swapped value we need to bit swap the mask and that
+ * is what is accomplished by this function.
+ **/
+static u32 ixgbe_get_fdirtcpm_82599(struct ixgbe_atr_input_masks *input_masks)
+{
+ u32 mask = ntohs(input_masks->dst_port_mask);
+ mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
+ mask |= ntohs(input_masks->src_port_mask);
+ mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
+ mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
+ mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
+ return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
+}
+
+/*
+ * These two macros are meant to address the fact that we have registers
+ * that are either all or in part big-endian. As a result on big-endian
+ * systems we will end up byte swapping the value to little-endian before
+ * it is byte swapped again and written to the hardware in the original
+ * big-endian format.
+ */
+#define IXGBE_STORE_AS_BE32(_value) \
+ (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
+ (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))
+
+#define IXGBE_WRITE_REG_BE32(a, reg, value) \
+ IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value)))
+
+#define IXGBE_STORE_AS_BE16(_value) \
+ (((u16)(_value) >> 8) | ((u16)(_value) << 8))
+
+/**
* ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter
* @hw: pointer to hardware structure
* @input: input bitstream
@@ -1694,131 +1526,135 @@ s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
struct ixgbe_atr_input_masks *input_masks,
u16 soft_id, u8 queue)
{
- u32 fdircmd = 0;
u32 fdirhash;
- u32 src_ipv4 = 0, dst_ipv4 = 0;
- u32 src_ipv6_1, src_ipv6_2, src_ipv6_3, src_ipv6_4;
- u16 src_port, dst_port, vlan_id, flex_bytes;
- u16 bucket_hash;
- u8 l4type;
- u8 fdirm = 0;
-
- /* Get our input values */
- ixgbe_atr_get_l4type_82599(input, &l4type);
+ u32 fdircmd;
+ u32 fdirport, fdirtcpm;
+ u32 fdirvlan;
+ /* start with VLAN, flex bytes, VM pool, and IPv6 destination masked */
+ u32 fdirm = IXGBE_FDIRM_VLANID | IXGBE_FDIRM_VLANP | IXGBE_FDIRM_FLEX |
+ IXGBE_FDIRM_POOL | IXGBE_FDIRM_DIPv6;
/*
- * Check l4type formatting, and bail out before we touch the hardware
+ * Check flow_type formatting, and bail out before we touch the hardware
* if there's a configuration issue
*/
- switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
- case IXGBE_ATR_L4TYPE_TCP:
- fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP;
- break;
- case IXGBE_ATR_L4TYPE_UDP:
- fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP;
- break;
- case IXGBE_ATR_L4TYPE_SCTP:
- fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP;
+ switch (input->formatted.flow_type) {
+ case IXGBE_ATR_FLOW_TYPE_IPV4:
+ /* use the L4 protocol mask for raw IPv4/IPv6 traffic */
+ fdirm |= IXGBE_FDIRM_L4P;
+ case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+ if (input_masks->dst_port_mask || input_masks->src_port_mask) {
+ hw_dbg(hw, " Error on src/dst port mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+ case IXGBE_ATR_FLOW_TYPE_TCPV4:
+ case IXGBE_ATR_FLOW_TYPE_UDPV4:
break;
default:
- hw_dbg(hw, "Error on l4type input\n");
+ hw_dbg(hw, " Error on flow type input\n");
return IXGBE_ERR_CONFIG;
}
- bucket_hash = ixgbe_atr_compute_hash_82599(input,
- IXGBE_ATR_BUCKET_HASH_KEY);
-
- /* bucket_hash is only 15 bits */
- bucket_hash &= IXGBE_ATR_HASH_MASK;
-
- ixgbe_atr_get_vlan_id_82599(input, &vlan_id);
- ixgbe_atr_get_src_port_82599(input, &src_port);
- ixgbe_atr_get_dst_port_82599(input, &dst_port);
- ixgbe_atr_get_flex_byte_82599(input, &flex_bytes);
-
- fdirhash = soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash;
-
- /* Now figure out if we're IPv4 or IPv6 */
- if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK) {
- /* IPv6 */
- ixgbe_atr_get_src_ipv6_82599(input, &src_ipv6_1, &src_ipv6_2,
- &src_ipv6_3, &src_ipv6_4);
-
- IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(0), src_ipv6_1);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(1), src_ipv6_2);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(2), src_ipv6_3);
- /* The last 4 bytes is the same register as IPv4 */
- IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv6_4);
-
- fdircmd |= IXGBE_FDIRCMD_IPV6;
- fdircmd |= IXGBE_FDIRCMD_IPv6DMATCH;
- } else {
- /* IPv4 */
- ixgbe_atr_get_src_ipv4_82599(input, &src_ipv4);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv4);
- }
-
- ixgbe_atr_get_dst_ipv4_82599(input, &dst_ipv4);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRIPDA, dst_ipv4);
-
- IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, (vlan_id |
- (flex_bytes << IXGBE_FDIRVLAN_FLEX_SHIFT)));
- IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, (src_port |
- (dst_port << IXGBE_FDIRPORT_DESTINATION_SHIFT)));
-
/*
- * Program the relevant mask registers. L4type cannot be
- * masked out in this implementation.
+ * Program the relevant mask registers. If src/dst_port or src/dst_addr
+ * are zero, then assume a full mask for that field. Also assume that
+ * a VLAN of 0 is unspecified, so mask that out as well. L4type
+ * cannot be masked out in this implementation.
*
* This also assumes IPv4 only. IPv6 masking isn't supported at this
* point in time.
*/
- IXGBE_WRITE_REG(hw, IXGBE_FDIRSIP4M, input_masks->src_ip_mask);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRDIP4M, input_masks->dst_ip_mask);
-
- switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
- case IXGBE_ATR_L4TYPE_TCP:
- IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, input_masks->src_port_mask);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM,
- (IXGBE_READ_REG(hw, IXGBE_FDIRTCPM) |
- (input_masks->dst_port_mask << 16)));
+
+ /* Program FDIRM */
+ switch (ntohs(input_masks->vlan_id_mask) & 0xEFFF) {
+ case 0xEFFF:
+ /* Unmask VLAN ID - bit 0 and fall through to unmask prio */
+ fdirm &= ~IXGBE_FDIRM_VLANID;
+ case 0xE000:
+ /* Unmask VLAN prio - bit 1 */
+ fdirm &= ~IXGBE_FDIRM_VLANP;
break;
- case IXGBE_ATR_L4TYPE_UDP:
- IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, input_masks->src_port_mask);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM,
- (IXGBE_READ_REG(hw, IXGBE_FDIRUDPM) |
- (input_masks->src_port_mask << 16)));
+ case 0x0FFF:
+ /* Unmask VLAN ID - bit 0 */
+ fdirm &= ~IXGBE_FDIRM_VLANID;
break;
- default:
- /* this already would have failed above */
+ case 0x0000:
+ /* do nothing, vlans already masked */
break;
+ default:
+ hw_dbg(hw, " Error on VLAN mask\n");
+ return IXGBE_ERR_CONFIG;
}
- /* Program the last mask register, FDIRM */
- if (input_masks->vlan_id_mask)
- /* Mask both VLAN and VLANP - bits 0 and 1 */
- fdirm |= 0x3;
-
- if (input_masks->data_mask)
- /* Flex bytes need masking, so mask the whole thing - bit 4 */
- fdirm |= 0x10;
+ if (input_masks->flex_mask & 0xFFFF) {
+ if ((input_masks->flex_mask & 0xFFFF) != 0xFFFF) {
+ hw_dbg(hw, " Error on flexible byte mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+ /* Unmask Flex Bytes - bit 4 */
+ fdirm &= ~IXGBE_FDIRM_FLEX;
+ }
/* Now mask VM pool and destination IPv6 - bits 5 and 2 */
- fdirm |= 0x24;
-
IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
- fdircmd |= IXGBE_FDIRCMD_CMD_ADD_FLOW;
- fdircmd |= IXGBE_FDIRCMD_FILTER_UPDATE;
- fdircmd |= IXGBE_FDIRCMD_LAST;
- fdircmd |= IXGBE_FDIRCMD_QUEUE_EN;
- fdircmd |= queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+ /* store the TCP/UDP port masks, bit reversed from port layout */
+ fdirtcpm = ixgbe_get_fdirtcpm_82599(input_masks);
+
+ /* write both the same so that UDP and TCP use the same mask */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
+
+ /* store source and destination IP masks (big-enian) */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
+ ~input_masks->src_ip_mask[0]);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
+ ~input_masks->dst_ip_mask[0]);
+
+ /* Apply masks to input data */
+ input->formatted.vlan_id &= input_masks->vlan_id_mask;
+ input->formatted.flex_bytes &= input_masks->flex_mask;
+ input->formatted.src_port &= input_masks->src_port_mask;
+ input->formatted.dst_port &= input_masks->dst_port_mask;
+ input->formatted.src_ip[0] &= input_masks->src_ip_mask[0];
+ input->formatted.dst_ip[0] &= input_masks->dst_ip_mask[0];
+
+ /* record vlan (little-endian) and flex_bytes(big-endian) */
+ fdirvlan =
+ IXGBE_STORE_AS_BE16(ntohs(input->formatted.flex_bytes));
+ fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
+ fdirvlan |= ntohs(input->formatted.vlan_id);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
+
+ /* record source and destination port (little-endian)*/
+ fdirport = ntohs(input->formatted.dst_port);
+ fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
+ fdirport |= ntohs(input->formatted.src_port);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
+
+ /* record the first 32 bits of the destination address (big-endian) */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]);
+
+ /* record the source address (big-endian) */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]);
+
+ /* configure FDIRCMD register */
+ fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+ IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+ fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+ fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+
+ /* we only want the bucket hash so drop the upper 16 bits */
+ fdirhash = ixgbe_atr_compute_hash_82599(input,
+ IXGBE_ATR_BUCKET_HASH_KEY);
+ fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
return 0;
}
+
/**
* ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
* @hw: pointer to hardware structure
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 76e40e2..2002ea8 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -2277,10 +2277,11 @@ static int ixgbe_set_rx_ntuple(struct net_device *dev,
struct ethtool_rx_ntuple *cmd)
{
struct ixgbe_adapter *adapter = netdev_priv(dev);
- struct ethtool_rx_ntuple_flow_spec fs = cmd->fs;
+ struct ethtool_rx_ntuple_flow_spec *fs = &cmd->fs;
union ixgbe_atr_input input_struct;
struct ixgbe_atr_input_masks input_masks;
int target_queue;
+ int err;
if (adapter->hw.mac.type == ixgbe_mac_82598EB)
return -EOPNOTSUPP;
@@ -2289,67 +2290,122 @@ static int ixgbe_set_rx_ntuple(struct net_device *dev,
* Don't allow programming if the action is a queue greater than
* the number of online Tx queues.
*/
- if ((fs.action >= adapter->num_tx_queues) ||
- (fs.action < ETHTOOL_RXNTUPLE_ACTION_DROP))
+ if ((fs->action >= adapter->num_tx_queues) ||
+ (fs->action < ETHTOOL_RXNTUPLE_ACTION_DROP))
return -EINVAL;
memset(&input_struct, 0, sizeof(union ixgbe_atr_input));
memset(&input_masks, 0, sizeof(struct ixgbe_atr_input_masks));
- input_masks.src_ip_mask = fs.m_u.tcp_ip4_spec.ip4src;
- input_masks.dst_ip_mask = fs.m_u.tcp_ip4_spec.ip4dst;
- input_masks.src_port_mask = fs.m_u.tcp_ip4_spec.psrc;
- input_masks.dst_port_mask = fs.m_u.tcp_ip4_spec.pdst;
- input_masks.vlan_id_mask = fs.vlan_tag_mask;
- /* only use the lowest 2 bytes for flex bytes */
- input_masks.data_mask = (fs.data_mask & 0xffff);
-
- switch (fs.flow_type) {
+ /* record flow type */
+ switch (fs->flow_type) {
+ case IPV4_FLOW:
+ input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_IPV4;
+ break;
case TCP_V4_FLOW:
- ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_TCP);
+ input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
break;
case UDP_V4_FLOW:
- ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_UDP);
+ input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4;
break;
case SCTP_V4_FLOW:
- ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_SCTP);
+ input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4;
break;
default:
return -1;
}
- /* Mask bits from the inputs based on user-supplied mask */
- ixgbe_atr_set_src_ipv4_82599(&input_struct,
- (fs.h_u.tcp_ip4_spec.ip4src & ~fs.m_u.tcp_ip4_spec.ip4src));
- ixgbe_atr_set_dst_ipv4_82599(&input_struct,
- (fs.h_u.tcp_ip4_spec.ip4dst & ~fs.m_u.tcp_ip4_spec.ip4dst));
- /* 82599 expects these to be byte-swapped for perfect filtering */
- ixgbe_atr_set_src_port_82599(&input_struct,
- ((ntohs(fs.h_u.tcp_ip4_spec.psrc)) & ~fs.m_u.tcp_ip4_spec.psrc));
- ixgbe_atr_set_dst_port_82599(&input_struct,
- ((ntohs(fs.h_u.tcp_ip4_spec.pdst)) & ~fs.m_u.tcp_ip4_spec.pdst));
-
- /* VLAN and Flex bytes are either completely masked or not */
- if (!fs.vlan_tag_mask)
- ixgbe_atr_set_vlan_id_82599(&input_struct, fs.vlan_tag);
-
- if (!input_masks.data_mask)
- /* make sure we only use the first 2 bytes of user data */
- ixgbe_atr_set_flex_byte_82599(&input_struct,
- (fs.data & 0xffff));
+ /* copy vlan tag minus the CFI bit */
+ if ((fs->vlan_tag & 0xEFFF) || (~fs->vlan_tag_mask & 0xEFFF)) {
+ input_struct.formatted.vlan_id = htons(fs->vlan_tag & 0xEFFF);
+ if (!fs->vlan_tag_mask) {
+ input_masks.vlan_id_mask = htons(0xEFFF);
+ } else {
+ switch (~fs->vlan_tag_mask & 0xEFFF) {
+ /* all of these are valid vlan-mask values */
+ case 0xEFFF:
+ case 0xE000:
+ case 0x0FFF:
+ case 0x0000:
+ input_masks.vlan_id_mask =
+ htons(~fs->vlan_tag_mask);
+ break;
+ /* exit with error if vlan-mask is invalid */
+ default:
+ e_err(drv, "Partial VLAN ID or "
+ "priority mask in vlan-mask is not "
+ "supported by hardware\n");
+ return -1;
+ }
+ }
+ }
+
+ /* make sure we only use the first 2 bytes of user data */
+ if ((fs->data & 0xFFFF) || (~fs->data_mask & 0xFFFF)) {
+ input_struct.formatted.flex_bytes = htons(fs->data & 0xFFFF);
+ if (!(fs->data_mask & 0xFFFF)) {
+ input_masks.flex_mask = 0xFFFF;
+ } else if (~fs->data_mask & 0xFFFF) {
+ e_err(drv, "Partial user-def-mask is not "
+ "supported by hardware\n");
+ return -1;
+ }
+ }
+
+ /*
+ * Copy input into formatted structures
+ *
+ * These assignments are based on the following logic
+ * If neither input or mask are set assume value is masked out.
+ * If input is set, but mask is not mask should default to accept all.
+ * If input is not set, but mask is set then mask likely results in 0.
+ * If input is set and mask is set then assign both.
+ */
+ if (fs->h_u.tcp_ip4_spec.ip4src || ~fs->m_u.tcp_ip4_spec.ip4src) {
+ input_struct.formatted.src_ip[0] = fs->h_u.tcp_ip4_spec.ip4src;
+ if (!fs->m_u.tcp_ip4_spec.ip4src)
+ input_masks.src_ip_mask[0] = 0xFFFFFFFF;
+ else
+ input_masks.src_ip_mask[0] =
+ ~fs->m_u.tcp_ip4_spec.ip4src;
+ }
+ if (fs->h_u.tcp_ip4_spec.ip4dst || ~fs->m_u.tcp_ip4_spec.ip4dst) {
+ input_struct.formatted.dst_ip[0] = fs->h_u.tcp_ip4_spec.ip4dst;
+ if (!fs->m_u.tcp_ip4_spec.ip4dst)
+ input_masks.dst_ip_mask[0] = 0xFFFFFFFF;
+ else
+ input_masks.dst_ip_mask[0] =
+ ~fs->m_u.tcp_ip4_spec.ip4dst;
+ }
+ if (fs->h_u.tcp_ip4_spec.psrc || ~fs->m_u.tcp_ip4_spec.psrc) {
+ input_struct.formatted.src_port = fs->h_u.tcp_ip4_spec.psrc;
+ if (!fs->m_u.tcp_ip4_spec.psrc)
+ input_masks.src_port_mask = 0xFFFF;
+ else
+ input_masks.src_port_mask = ~fs->m_u.tcp_ip4_spec.psrc;
+ }
+ if (fs->h_u.tcp_ip4_spec.pdst || ~fs->m_u.tcp_ip4_spec.pdst) {
+ input_struct.formatted.dst_port = fs->h_u.tcp_ip4_spec.pdst;
+ if (!fs->m_u.tcp_ip4_spec.pdst)
+ input_masks.dst_port_mask = 0xFFFF;
+ else
+ input_masks.dst_port_mask = ~fs->m_u.tcp_ip4_spec.pdst;
+ }
/* determine if we need to drop or route the packet */
- if (fs.action == ETHTOOL_RXNTUPLE_ACTION_DROP)
+ if (fs->action == ETHTOOL_RXNTUPLE_ACTION_DROP)
target_queue = MAX_RX_QUEUES - 1;
else
- target_queue = fs.action;
+ target_queue = fs->action;
spin_lock(&adapter->fdir_perfect_lock);
- ixgbe_fdir_add_perfect_filter_82599(&adapter->hw, &input_struct,
- &input_masks, 0, target_queue);
+ err = ixgbe_fdir_add_perfect_filter_82599(&adapter->hw,
+ &input_struct,
+ &input_masks, 0,
+ target_queue);
spin_unlock(&adapter->fdir_perfect_lock);
- return 0;
+ return err ? -1 : 0;
}
static const struct ethtool_ops ixgbe_ethtool_ops = {
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 490818c..a060610 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -4821,6 +4821,12 @@ static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
+ if (adapter->flags & (IXGBE_FLAG_FDIR_HASH_CAPABLE |
+ IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) {
+ e_err(probe,
+ "Flow Director is not supported while multiple "
+ "queues are disabled. Disabling Flow Director\n");
+ }
adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
adapter->atr_sample_rate = 0;
@@ -5126,16 +5132,11 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM)
adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE;
- if (dev->features & NETIF_F_NTUPLE) {
- /* Flow Director perfect filter enabled */
- adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
- adapter->atr_sample_rate = 0;
- spin_lock_init(&adapter->fdir_perfect_lock);
- } else {
- /* Flow Director hash filters enabled */
- adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
- adapter->atr_sample_rate = 20;
- }
+ /* n-tuple support exists, always init our spinlock */
+ spin_lock_init(&adapter->fdir_perfect_lock);
+ /* Flow Director hash filters enabled */
+ adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+ adapter->atr_sample_rate = 20;
adapter->ring_feature[RING_F_FDIR].indices =
IXGBE_MAX_FDIR_INDICES;
adapter->fdir_pballoc = 0;
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 0d9392d..fd3358f 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -1947,10 +1947,9 @@ enum ixgbe_fdir_pballoc_type {
#define IXGBE_FDIRM_VLANID 0x00000001
#define IXGBE_FDIRM_VLANP 0x00000002
#define IXGBE_FDIRM_POOL 0x00000004
-#define IXGBE_FDIRM_L3P 0x00000008
-#define IXGBE_FDIRM_L4P 0x00000010
-#define IXGBE_FDIRM_FLEX 0x00000020
-#define IXGBE_FDIRM_DIPv6 0x00000040
+#define IXGBE_FDIRM_L4P 0x00000008
+#define IXGBE_FDIRM_FLEX 0x00000010
+#define IXGBE_FDIRM_DIPv6 0x00000020
#define IXGBE_FDIRFREE_FREE_MASK 0xFFFF
#define IXGBE_FDIRFREE_FREE_SHIFT 0
@@ -2215,12 +2214,13 @@ union ixgbe_atr_hash_dword {
};
struct ixgbe_atr_input_masks {
- __be32 src_ip_mask;
- __be32 dst_ip_mask;
+ __be16 rsvd0;
+ __be16 vlan_id_mask;
+ __be32 dst_ip_mask[4];
+ __be32 src_ip_mask[4];
__be16 src_port_mask;
__be16 dst_port_mask;
- __be16 vlan_id_mask;
- __be16 data_mask;
+ __be16 flex_mask;
};
enum ixgbe_eeprom_type {
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists