netdev - [net-next-2.6 15/21] ixgbe: DCB during ifup use correct CEE or IEEE mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Sat, 12 Mar 2011 04:20:22 -0800
From:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:	davem@...emloft.net
Cc:	John Fastabend <john.r.fastabend@...el.com>,
	netdev@...r.kernel.org, gospo@...hat.com, bphilips@...ell.com,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next-2.6 15/21] ixgbe: DCB during ifup use correct CEE or IEEE mode

From: John Fastabend <john.r.fastabend@...el.com>

DCB settings are cleared in the hardware across link events
during ifup ixgbe reprograms the hardware for DCB if it is
enabled. Now that we have two modes CEE or IEEE we need to
use the correct set of configuration data.

This patch checks the dcbx_cap bits and then enables the
device in the correct mode.

Signed-off-by: John Fastabend <john.r.fastabend@...el.com>
Tested-by: Ross Brattain <ross.b.brattain@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ixgbe/ixgbe_main.c |   30 ++++++++++++++++++++----------
 1 files changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index be2e145..38f9758 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -3658,15 +3658,6 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
 	if (hw->mac.type == ixgbe_mac_82598EB)
 		netif_set_gso_max_size(adapter->netdev, 32768);
 
-#ifdef CONFIG_FCOE
-	if (adapter->netdev->features & NETIF_F_FCOE_MTU)
-		max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
-#endif
-
-	ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
-					DCB_TX_CONFIG);
-	ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
-					DCB_RX_CONFIG);
 
 	/* Enable VLAN tag insert/strip */
 	adapter->netdev->features |= NETIF_F_HW_VLAN_RX;
@@ -3674,7 +3665,26 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
 	hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true);
 
 	/* reconfigure the hardware */
-	ixgbe_dcb_hw_config(hw, &adapter->dcb_cfg);
+	if (adapter->dcbx_cap & (DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_CEE)) {
+#ifdef CONFIG_FCOE
+		if (adapter->netdev->features & NETIF_F_FCOE_MTU)
+			max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
+#endif
+		ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
+						DCB_TX_CONFIG);
+		ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
+						DCB_RX_CONFIG);
+		ixgbe_dcb_hw_config(hw, &adapter->dcb_cfg);
+	} else {
+		struct net_device *dev = adapter->netdev;
+
+		if (adapter->ixgbe_ieee_ets)
+			dev->dcbnl_ops->ieee_setets(dev,
+						    adapter->ixgbe_ieee_ets);
+		if (adapter->ixgbe_ieee_pfc)
+			dev->dcbnl_ops->ieee_setpfc(dev,
+						    adapter->ixgbe_ieee_pfc);
+	}
 
 	/* Enable RSS Hash per TC */
 	if (hw->mac.type != ixgbe_mac_82598EB) {
-- 
1.7.4

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html