| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 13 Apr 2011 16:09:10 -0700
From: Bruce Allan <bruce.w.allan@...el.com>
To: netdev@...r.kernel.org
Cc: Bruce Allan <bruce.w.allan@...el.com>,
Ben Hutchings <bhutchings@...arflare.com>,
Sathya Perla <sathya.perla@...lex.com>,
Subbu Seetharaman <subbu.seetharaman@...lex.com>,
Ajit Khaparde <ajit.khaparde@...lex.com>,
Michael Chan <mchan@...adcom.com>,
Eilon Greenstein <eilong@...adcom.com>,
Divy Le Ray <divy@...lsio.com>,
Don Fry <pcnet32@...ntier.com>, Jon Mason <jdmason@...zu.us>,
Solarflare linux maintainers <linux-net-drivers@...arflare.com>,
Steve Hodgson <shodgson@...arflare.com>,
Stephen Hemminger <shemminger@...ux-foundation.org>,
Matt Carlson <mcarlson@...adcom.com>
Subject: [net-next-2.6 RFC PATCH v3] ethtool: allow custom interval for
physical identification
When physical identification of an adapter is done by toggling the
mechanism on and off through software utilizing the set_phys_id operation,
it is done with a fixed duration for both on and off states. Some drivers
may want to set a custom duration for the on/off intervals. This patch
changes the API so the return code from the driver's entry point when it
is called with ETHTOOL_ID_ACTIVE can specify the frequency at which to
cycle the on/off states, and updates the drivers that have already been
converted to use the new set_phys_id and use the synchronous method for
identifying an adapter.
The physical identification frequency set in the updated drivers is based
on how it was done prior to the introduction of set_phys_id.
Compile tested only. Also fixes a compiler warning in sfc.
v2: drivers do not return -EINVAL for ETHOOL_ID_ACTIVE
v3: fold patchset into single patch and cleanup per Ben's feedback
Signed-off-by: Bruce Allan <bruce.w.allan@...el.com>
Cc: Ben Hutchings <bhutchings@...arflare.com>
Cc: Sathya Perla <sathya.perla@...lex.com>
Cc: Subbu Seetharaman <subbu.seetharaman@...lex.com>
Cc: Ajit Khaparde <ajit.khaparde@...lex.com>
Cc: Michael Chan <mchan@...adcom.com>
Cc: Eilon Greenstein <eilong@...adcom.com>
Cc: Divy Le Ray <divy@...lsio.com>
Cc: Don Fry <pcnet32@...ntier.com>
Cc: Jon Mason <jdmason@...zu.us>
Cc: Solarflare linux maintainers <linux-net-drivers@...arflare.com>
Cc: Steve Hodgson <shodgson@...arflare.com>
Cc: Stephen Hemminger <shemminger@...ux-foundation.org>
Cc: Matt Carlson <mcarlson@...adcom.com>
---
drivers/net/benet/be_ethtool.c | 2 +-
drivers/net/bnx2.c | 2 +-
drivers/net/bnx2x/bnx2x_ethtool.c | 2 +-
drivers/net/cxgb3/cxgb3_main.c | 2 +-
drivers/net/ewrk3.c | 2 +-
drivers/net/niu.c | 2 +-
drivers/net/pcnet32.c | 2 +-
drivers/net/s2io.c | 2 +-
drivers/net/sfc/ethtool.c | 6 +++---
drivers/net/skge.c | 2 +-
drivers/net/sky2.c | 2 +-
drivers/net/tg3.c | 2 +-
include/linux/ethtool.h | 6 ++++--
net/core/ethtool.c | 31 ++++++++++++++++---------------
14 files changed, 34 insertions(+), 31 deletions(-)
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 96f5502..80226e4 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -516,7 +516,7 @@ be_set_phys_id(struct net_device *netdev,
case ETHTOOL_ID_ACTIVE:
be_cmd_get_beacon_state(adapter, adapter->hba_port_num,
&adapter->beacon_state);
- return -EINVAL;
+ return 1; /* cycle on/off once per second */
case ETHTOOL_ID_ON:
be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 0a52079..bf729ee 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7473,7 +7473,7 @@ bnx2_set_phys_id(struct net_device *dev, enum ethtool_phys_id_state state)
bp->leds_save = REG_RD(bp, BNX2_MISC_CFG);
REG_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC);
- return -EINVAL;
+ return 1; /* cycle on/off once per second */
case ETHTOOL_ID_ON:
REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE |
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index ad7d91e..0a5e88d 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -2025,7 +2025,7 @@ static int bnx2x_set_phys_id(struct net_device *dev,
switch (state) {
case ETHTOOL_ID_ACTIVE:
- return -EINVAL;
+ return 1; /* cycle on/off once per second */
case ETHTOOL_ID_ON:
bnx2x_set_led(&bp->link_params, &bp->link_vars,
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 802c7a7..a087e06 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -1757,7 +1757,7 @@ static int set_phys_id(struct net_device *dev,
switch (state) {
case ETHTOOL_ID_ACTIVE:
- return -EINVAL;
+ return 1; /* cycle on/off once per second */
case ETHTOOL_ID_OFF:
t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL, 0);
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c
index c7ce443..17b6027 100644
--- a/drivers/net/ewrk3.c
+++ b/drivers/net/ewrk3.c
@@ -1618,7 +1618,7 @@ static int ewrk3_set_phys_id(struct net_device *dev,
/* Prevent ISR from twiddling the LED */
lp->led_mask = 0;
spin_unlock_irq(&lp->hw_lock);
- return -EINVAL;
+ return 2; /* cycle on/off twice per second */
case ETHTOOL_ID_ON:
cr = inb(EWRK3_CR);
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 3fa1e9c..ea2272f 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -7896,7 +7896,7 @@ static int niu_set_phys_id(struct net_device *dev,
switch (state) {
case ETHTOOL_ID_ACTIVE:
np->orig_led_state = niu_led_state_save(np);
- return -EINVAL;
+ return 1; /* cycle on/off once per second */
case ETHTOOL_ID_ON:
niu_force_led(np, 1);
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index e89afb9..0a1efba 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1038,7 +1038,7 @@ static int pcnet32_set_phys_id(struct net_device *dev,
for (i = 4; i < 8; i++)
lp->save_regs[i - 4] = a->read_bcr(ioaddr, i);
spin_unlock_irqrestore(&lp->lock, flags);
- return -EINVAL;
+ return 2; /* cycle on/off twice per second */
case ETHTOOL_ID_ON:
case ETHTOOL_ID_OFF:
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 2d5cc61..2302d97 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -5541,7 +5541,7 @@ static int s2io_ethtool_set_led(struct net_device *dev,
switch (state) {
case ETHTOOL_ID_ACTIVE:
sp->adapt_ctrl_org = readq(&bar0->gpio_control);
- return -EINVAL;
+ return 1; /* cycle on/off once per second */
case ETHTOOL_ID_ON:
s2io_set_led(sp, true);
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 644f7c1..5d8468f 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -182,7 +182,7 @@ static int efx_ethtool_phys_id(struct net_device *net_dev,
enum ethtool_phys_id_state state)
{
struct efx_nic *efx = netdev_priv(net_dev);
- enum efx_led_mode mode;
+ enum efx_led_mode mode = EFX_LED_DEFAULT;
switch (state) {
case ETHTOOL_ID_ON:
@@ -194,8 +194,8 @@ static int efx_ethtool_phys_id(struct net_device *net_dev,
case ETHTOOL_ID_INACTIVE:
mode = EFX_LED_DEFAULT;
break;
- default:
- return -EINVAL;
+ case ETHTOOL_ID_ACTIVE:
+ return 1; /* cycle on/off once per second */
}
efx->type->set_id_led(efx, mode);
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 310dcbc..176d784 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -753,7 +753,7 @@ static int skge_set_phys_id(struct net_device *dev,
switch (state) {
case ETHTOOL_ID_ACTIVE:
- return -EINVAL;
+ return 2; /* cycle on/off twice per second */
case ETHTOOL_ID_ON:
skge_led(skge, LED_MODE_TST);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index a4b8fe5..c8d0451 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3813,7 +3813,7 @@ static int sky2_set_phys_id(struct net_device *dev,
switch (state) {
case ETHTOOL_ID_ACTIVE:
- return -EINVAL;
+ return 1; /* cycle on/off once per second */
case ETHTOOL_ID_INACTIVE:
sky2_led(sky2, MO_LED_NORM);
break;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 9d7defc..7c1a9dd 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -10292,7 +10292,7 @@ static int tg3_set_phys_id(struct net_device *dev,
switch (state) {
case ETHTOOL_ID_ACTIVE:
- return -EINVAL;
+ return 1; /* cycle on/off once per second */
case ETHTOOL_ID_ON:
tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index ad22a68..9de3127 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -798,8 +798,10 @@ bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported);
* attached to it. The implementation may update the indicator
* asynchronously or synchronously, but in either case it must return
* quickly. It is initially called with the argument %ETHTOOL_ID_ACTIVE,
- * and must either activate asynchronous updates or return -%EINVAL.
- * If it returns -%EINVAL then it will be called again at intervals with
+ * and must either activate asynchronous updates and return zero, return
+ * a negative error or return a positive frequency for synchronous
+ * indication (e.g. 1 for one on/off cycle per second). If it returns
+ * a frequency then it will be called again at intervals with the
* argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
* the indicator accordingly. Finally, it is called with the argument
* %ETHTOOL_ID_INACTIVE and must deactivate the indicator. Returns a
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 41dee2d..13d79f5 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -1669,7 +1669,7 @@ static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
return dev->ethtool_ops->phys_id(dev, id.data);
rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_ACTIVE);
- if (rc && rc != -EINVAL)
+ if (rc < 0)
return rc;
/* Drop the RTNL lock while waiting, but prevent reentry or
@@ -1684,21 +1684,22 @@ static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
schedule_timeout_interruptible(
id.data ? (id.data * HZ) : MAX_SCHEDULE_TIMEOUT);
} else {
- /* Driver expects to be called periodically */
+ /* Driver expects to be called at twice the frequency in rc */
+ int n = rc * 2, i, interval = HZ / n;
+
+ /* Count down seconds */
do {
- rtnl_lock();
- rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_ON);
- rtnl_unlock();
- if (rc)
- break;
- schedule_timeout_interruptible(HZ / 2);
-
- rtnl_lock();
- rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_OFF);
- rtnl_unlock();
- if (rc)
- break;
- schedule_timeout_interruptible(HZ / 2);
+ /* Count down iterations per second */
+ i = n;
+ do {
+ rtnl_lock();
+ rc = dev->ethtool_ops->set_phys_id(dev,
+ (i & 1) ? ETHTOOL_ID_OFF : ETHTOOL_ID_ON);
+ rtnl_unlock();
+ if (rc)
+ break;
+ schedule_timeout_interruptible(interval);
+ } while (!signal_pending(current) && --i != 0);
} while (!signal_pending(current) &&
(id.data == 0 || --id.data != 0));
}
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists