lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 04 May 2011 11:18:21 -0700
From:	Dimitris Michailidis <dm@...lsio.com>
To:	Alexander Duyck <alexander.h.duyck@...el.com>
CC:	Ben Hutchings <bhutchings@...arflare.com>,
	"davem@...emloft.net" <davem@...emloft.net>,
	"Kirsher, Jeffrey T" <jeffrey.t.kirsher@...el.com>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [ethtool PATCH 4/4] v5 Add RX packet classification interface

On 05/04/2011 10:41 AM, Alexander Duyck wrote:
> On 5/4/2011 10:33 AM, Dimitris Michailidis wrote:
>> On 05/04/2011 10:24 AM, Ben Hutchings wrote:
>>> On Wed, 2011-05-04 at 10:09 -0700, Dimitris Michailidis wrote:
>>>> On 05/03/2011 04:34 PM, Ben Hutchings wrote:
>>>>> On Tue, 2011-05-03 at 16:23 -0700, Dimitris Michailidis wrote:
>>>>>> I think RX_CLS_LOC_UNSPEC should be passed to the driver, where 
>>>>>> there is
>>>>>> enough knowledge to pick an appropriate slot.  So I'd remove the
>>>>>>
>>>>>>       if (loc == RX_CLS_LOC_UNSPEC)
>>>>>>
>>>>>> block above, let the driver pick a slot, and then pass the 
>>>>>> selected location
>>>>>> back for ethtool to report.
>>>>> But first we have to specify this in the ethtool API.  So please 
>>>>> propose
>>>>> a patch to ethtool.h.
>>>> In the past we discussed that being able to specify the first 
>>>> available slot or
>>>> the last available would be useful, so something like the below?
>>>>
>>>> diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
>>>> index 4194a20..909ef79 100644
>>>> --- a/include/linux/ethtool.h
>>>> +++ b/include/linux/ethtool.h
>>>> @@ -442,7 +442,8 @@ struct ethtool_flow_ext {
>>>>     *    includes the %FLOW_EXT flag.
>>>>     * @ring_cookie: RX ring/queue index to deliver to, or 
>>>> %RX_CLS_FLOW_DISC
>>>>     *    if packets should be discarded
>>>> - * @location: Index of filter in hardware table
>>>> + * @location: Index of filter in hardware table, or 
>>>> %RX_CLS_FLOW_FIRST_LOC for
>>>> + *    first available index, or %RX_CLS_FLOW_LAST_LOC for last 
>>>> available
>>> [...]
>>>
>>> I think that's reasonable.  We should also explicitly state that
>>> location determines priority, i.e. if a packet matches two filters then
>>> the one with the lower location wins.
>>
>> Easy and true for a TCAM.  For hashing would you use the location to 
>> decide how
>> to order filters that fall in the same bucket?
>>
> 
> The problem is none of this is backwards compatible.  The niu driver has 
> supported the network flow classifier rules since 2.6.30.  Adding this 
> would cause all rule setups for niu to fail because these locations 
> would have to exist outside of the current rule locations.

Looking at niu it already has a problem with its handling of location because 
it does

	u16 idx;

	idx = nfc->fs.location;

i.e., it disregards the upper 16 bits of location.  With the current code niu 
would return -EINVAL for the two new constants, which seems correct.

> 
> This is why I was suggesting that the best approach would be to update 
> the kernel to add a separate ioctl for letting the driver setup the 
> location.  We can just attempt to make that call and when we get the 
> EOPNOTSUPP errno we know the device driver doesn't support it and can 
> then let the rule manager take over.

The problem with this is the location is dependent on the type of filter being 
added.  I.e., the ioctl would need to get all the information the existing 
ioctl carries making the new ioctl a small superset of the current one.
Additionally, if the driver only allocates a location in a separate ioctl how 
does it know that the app is actually going to use it?
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ