| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 12 Aug 2011 00:32:59 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com,
Sachin Sanap <ssanap@...vell.com>,
Zhangfei Gao <zgao6@...vell.com>,
Philip Rakity <prakity@...vell.com>,
Mark Brown <markb@...vell.com>,
Lennert Buytenhek <buytenh@...vell.com>,
Stephen Hemminger <shemminger@...ux-foundation.org>
Subject: [net-next 05/10] skge/sky2/mv643xx/pxa168: Move the Marvell Ethernet drivers
Move the Marvell Ethernet drivers into drivers/net/ethernet/marvell/
and make the necessary Kconfig and Makefile changes.
CC: Sachin Sanap <ssanap@...vell.com>
CC: Zhangfei Gao <zgao6@...vell.com>
CC: Philip Rakity <prakity@...vell.com>
CC: Mark Brown <markb@...vell.com>
CC: Lennert Buytenhek <buytenh@...vell.com>
CC: Stephen Hemminger <shemminger@...ux-foundation.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
MAINTAINERS | 5 +-
drivers/net/Kconfig | 90 ------------------
drivers/net/Makefile | 4 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/marvell/Kconfig | 110 ++++++++++++++++++++++
drivers/net/ethernet/marvell/Makefile | 8 ++
drivers/net/{ => ethernet/marvell}/mv643xx_eth.c | 0
drivers/net/{ => ethernet/marvell}/pxa168_eth.c | 0
drivers/net/{ => ethernet/marvell}/skge.c | 0
drivers/net/{ => ethernet/marvell}/skge.h | 0
drivers/net/{ => ethernet/marvell}/sky2.c | 0
drivers/net/{ => ethernet/marvell}/sky2.h | 0
13 files changed, 122 insertions(+), 97 deletions(-)
create mode 100644 drivers/net/ethernet/marvell/Kconfig
create mode 100644 drivers/net/ethernet/marvell/Makefile
rename drivers/net/{ => ethernet/marvell}/mv643xx_eth.c (100%)
rename drivers/net/{ => ethernet/marvell}/pxa168_eth.c (100%)
rename drivers/net/{ => ethernet/marvell}/skge.c (100%)
rename drivers/net/{ => ethernet/marvell}/skge.h (100%)
rename drivers/net/{ => ethernet/marvell}/sky2.c (100%)
rename drivers/net/{ => ethernet/marvell}/sky2.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index e986e3e..b9acfde 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4122,7 +4122,7 @@ MARVELL MV643XX ETHERNET DRIVER
M: Lennert Buytenhek <buytenh@...tstofly.org>
L: netdev@...r.kernel.org
S: Maintained
-F: drivers/net/mv643xx_eth.*
+F: drivers/net/ethernet/marvell/mv643xx_eth.*
F: include/linux/mv643xx.h
MARVELL MWIFIEX WIRELESS DRIVER
@@ -5854,8 +5854,7 @@ SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
M: Stephen Hemminger <shemminger@...ux-foundation.org>
L: netdev@...r.kernel.org
S: Maintained
-F: drivers/net/skge.*
-F: drivers/net/sky2.*
+F: drivers/net/ethernet/marvell/sk*
SLAB ALLOCATOR
M: Christoph Lameter <cl@...ux-foundation.org>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 87e7a12..cb6c694 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -313,16 +313,6 @@ config BFIN_MAC_USE_HWSTAMP
help
To support the IEEE 1588 Precision Time Protocol (PTP), select y here
-config PXA168_ETH
- tristate "Marvell pxa168 ethernet support"
- depends on CPU_PXA168
- select PHYLIB
- help
- This driver supports the pxa168 Ethernet ports.
-
- To compile this driver as a module, choose M here. The module
- will be called pxa168_eth.
-
config NET_NETX
tristate "NetX Ethernet support"
select MII
@@ -803,73 +793,6 @@ config SIS190
To compile this driver as a module, choose M here: the module
will be called sis190. This is recommended.
-config SKGE
- tristate "Marvell Yukon Gigabit Ethernet support"
- depends on PCI
- select CRC32
- ---help---
- This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
- and related Gigabit Ethernet adapters. It is a new smaller driver
- with better performance and more complete ethtool support.
-
- It does not support the link failover and network management
- features that "portable" vendor supplied sk98lin driver does.
-
- This driver supports adapters based on the original Yukon chipset:
- Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
- Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
-
- It does not support the newer Yukon2 chipset: a separate driver,
- sky2, is provided for these adapters.
-
- To compile this driver as a module, choose M here: the module
- will be called skge. This is recommended.
-
-config SKGE_DEBUG
- bool "Debugging interface"
- depends on SKGE && DEBUG_FS
- help
- This option adds the ability to dump driver state for debugging.
- The file /sys/kernel/debug/skge/ethX displays the state of the internal
- transmit and receive rings.
-
- If unsure, say N.
-
-config SKGE_GENESIS
- bool "Support for older SysKonnect Genesis boards"
- depends on SKGE
- help
- This enables support for the older and uncommon SysKonnect Genesis
- chips, which support MII via an external transceiver, instead of
- an internal one. Disabling this option will save some memory
- by making code smaller. If unsure say Y.
-
-config SKY2
- tristate "Marvell Yukon 2 support"
- depends on PCI
- select CRC32
- ---help---
- This driver supports Gigabit Ethernet adapters based on the
- Marvell Yukon 2 chipset:
- Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
- 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
-
- There is companion driver for the older Marvell Yukon and
- SysKonnect Genesis based adapters: skge.
-
- To compile this driver as a module, choose M here: the module
- will be called sky2. This is recommended.
-
-config SKY2_DEBUG
- bool "Debugging interface"
- depends on SKY2 && DEBUG_FS
- help
- This option adds the ability to dump driver state for debugging.
- The file /sys/kernel/debug/sky2/ethX displays the state of the internal
- transmit and receive rings.
-
- If unsure, say N.
-
config VIA_VELOCITY
tristate "VIA Velocity support"
depends on PCI
@@ -952,19 +875,6 @@ config UGETH_TX_ON_DEMAND
bool "Transmit on Demand support"
depends on UCC_GETH
-config MV643XX_ETH
- tristate "Marvell Discovery (643XX) and Orion ethernet support"
- depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
- select INET_LRO
- select PHYLIB
- help
- This driver supports the gigabit ethernet MACs in the
- Marvell Discovery PPC/MIPS chipset family (MV643XX) and
- in the Marvell Orion ARM SoC family.
-
- Some boards that use the Discovery chipset are the Momenco
- Ocelot C and Jaguar ATX and Pegasos II.
-
config XILINX_LL_TEMAC
tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
depends on PPC || MICROBLAZE
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 141ed25..69ca6a0 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -46,8 +46,6 @@ obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
obj-$(CONFIG_TC35815) += tc35815.o
-obj-$(CONFIG_SKGE) += skge.o
-obj-$(CONFIG_SKY2) += sky2.o
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_KS8842) += ks8842.o
obj-$(CONFIG_KS8851) += ks8851.o
@@ -75,7 +73,6 @@ endif
obj-$(CONFIG_FORCEDETH) += forcedeth.o
obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
-obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
@@ -111,7 +108,6 @@ obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
obj-$(CONFIG_ENC28J60) += enc28j60.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 0eaf957..1c447d9 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -28,6 +28,7 @@ source "drivers/net/ethernet/ibm/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
source "drivers/net/ethernet/xscale/Kconfig"
+source "drivers/net/ethernet/marvell/Kconfig"
source "drivers/net/ethernet/mellanox/Kconfig"
source "drivers/net/ethernet/myricom/Kconfig"
source "drivers/net/ethernet/natsemi/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index b5ca872..48c8656 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
+obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
new file mode 100644
index 0000000..e525408
--- /dev/null
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -0,0 +1,110 @@
+#
+# Marvell device configuration
+#
+
+config NET_VENDOR_MARVELL
+ bool "Marvell devices"
+ depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Marvell devices. If you say Y, you will be
+ asked for your specific card in the following questions.
+
+if NET_VENDOR_MARVELL
+
+config MV643XX_ETH
+ tristate "Marvell Discovery (643XX) and Orion ethernet support"
+ depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
+ select INET_LRO
+ select PHYLIB
+ ---help---
+ This driver supports the gigabit ethernet MACs in the
+ Marvell Discovery PPC/MIPS chipset family (MV643XX) and
+ in the Marvell Orion ARM SoC family.
+
+ Some boards that use the Discovery chipset are the Momenco
+ Ocelot C and Jaguar ATX and Pegasos II.
+
+config PXA168_ETH
+ tristate "Marvell pxa168 ethernet support"
+ depends on CPU_PXA168
+ select PHYLIB
+ ---help---
+ This driver supports the pxa168 Ethernet ports.
+
+ To compile this driver as a module, choose M here. The module
+ will be called pxa168_eth.
+
+config SKGE
+ tristate "Marvell Yukon Gigabit Ethernet support"
+ depends on PCI
+ select CRC32
+ ---help---
+ This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
+ and related Gigabit Ethernet adapters. It is a new smaller driver
+ with better performance and more complete ethtool support.
+
+ It does not support the link failover and network management
+ features that "portable" vendor supplied sk98lin driver does.
+
+ This driver supports adapters based on the original Yukon chipset:
+ Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
+ Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
+
+ It does not support the newer Yukon2 chipset: a separate driver,
+ sky2, is provided for these adapters.
+
+ To compile this driver as a module, choose M here: the module
+ will be called skge. This is recommended.
+
+config SKGE_DEBUG
+ bool "Debugging interface"
+ depends on SKGE && DEBUG_FS
+ ---help---
+ This option adds the ability to dump driver state for debugging.
+ The file /sys/kernel/debug/skge/ethX displays the state of the internal
+ transmit and receive rings.
+
+ If unsure, say N.
+
+config SKGE_GENESIS
+ bool "Support for older SysKonnect Genesis boards"
+ depends on SKGE
+ ---help---
+ This enables support for the older and uncommon SysKonnect Genesis
+ chips, which support MII via an external transceiver, instead of
+ an internal one. Disabling this option will save some memory
+ by making code smaller. If unsure say Y.
+
+config SKY2
+ tristate "Marvell Yukon 2 support"
+ depends on PCI
+ select CRC32
+ ---help---
+ This driver supports Gigabit Ethernet adapters based on the
+ Marvell Yukon 2 chipset:
+ Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
+ 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
+
+ There is companion driver for the older Marvell Yukon and
+ SysKonnect Genesis based adapters: skge.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sky2. This is recommended.
+
+config SKY2_DEBUG
+ bool "Debugging interface"
+ depends on SKY2 && DEBUG_FS
+ ---help---
+ This option adds the ability to dump driver state for debugging.
+ The file /sys/kernel/debug/sky2/ethX displays the state of the internal
+ transmit and receive rings.
+
+ If unsure, say N.
+
+endif # NET_VENDOR_MARVELL
diff --git a/drivers/net/ethernet/marvell/Makefile b/drivers/net/ethernet/marvell/Makefile
new file mode 100644
index 0000000..57e3234
--- /dev/null
+++ b/drivers/net/ethernet/marvell/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the Marvell device drivers.
+#
+
+obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
+obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
+obj-$(CONFIG_SKGE) += skge.o
+obj-$(CONFIG_SKY2) += sky2.o
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
similarity index 100%
rename from drivers/net/mv643xx_eth.c
rename to drivers/net/ethernet/marvell/mv643xx_eth.c
diff --git a/drivers/net/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
similarity index 100%
rename from drivers/net/pxa168_eth.c
rename to drivers/net/ethernet/marvell/pxa168_eth.c
diff --git a/drivers/net/skge.c b/drivers/net/ethernet/marvell/skge.c
similarity index 100%
rename from drivers/net/skge.c
rename to drivers/net/ethernet/marvell/skge.c
diff --git a/drivers/net/skge.h b/drivers/net/ethernet/marvell/skge.h
similarity index 100%
rename from drivers/net/skge.h
rename to drivers/net/ethernet/marvell/skge.h
diff --git a/drivers/net/sky2.c b/drivers/net/ethernet/marvell/sky2.c
similarity index 100%
rename from drivers/net/sky2.c
rename to drivers/net/ethernet/marvell/sky2.c
diff --git a/drivers/net/sky2.h b/drivers/net/ethernet/marvell/sky2.h
similarity index 100%
rename from drivers/net/sky2.h
rename to drivers/net/ethernet/marvell/sky2.h
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists