netdev - Network problem with bridge and virtualbox

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 29 Sep 2011 08:49:41 -0400
From:	William Thompson <wt@...ctro-mechanical.com>
To:	netdev@...r.kernel.org
Subject: Network problem with bridge and virtualbox

Please keep me in the CC as I am not subscribed.

I'm using a 64-bit kernel 3.0.0 and virtualbox 4.1.2.

My problem is that I cannot ping the host from a virtual machine.

My bridge is configured as follows:
# brctl addbr br0
# brctl setfd br0 0
# brctl stp br0 off
# ifconfig br0 10.2.3.1 netmask 255.255.255.0

In the virtual machine, it is set to use br0 as it's interface (bridge mode)
and it's IP is 10.2.3.10.

The host gets packets from the vm, but the vm does not receive packets back. 

I have this same setup working on a 32-bit kernel 2.6.38.6 on another
machine with virtualbox 4.0.4.

I had a thought that the bridge on the host wasn't responding due to having
no ports configured so I added one of my spare ethernet cards to it as
follows:
# brctl addif br0 eth1
# ifconfig eth1 up

The card was plugged into a switch.  After doing this, the vm still could not
talk to the host.  I added a physical machine to the switch that eth1 was
connected to and configured it to 10.2.3.2.  I was able to ping 10.2.3.2 but
not 10.2.3.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html