lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Fri, 30 Sep 2011 10:06:25 +0200
From:	Arkadiusz Miśkiewicz <a.miskiewicz@...il.com>
To:	"Matt Carlson" <mcarlson@...adcom.com>
Cc:	"Michael Chan" <mchan@...adcom.com>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: tg3: BMC stops responding in 3.0

On Friday 30 of September 2011, Matt Carlson wrote:
> On Mon, Sep 26, 2011 at 11:31:33AM -0700, Arkadiusz Mi??kiewicz wrote:
> > On Monday 26 of September 2011, Matt Carlson wrote:
> > > On Fri, Sep 23, 2011 at 12:45:50PM -0700, Arkadiusz Mi??kiewicz wrote:
> > > > Hi,
> > > > 
> > > > I was using 2.6.38.8 and recently tried to switch to 3.0.4 on Tyan
> > > > S2891 platform.
> > > > 
> > > > This platform uses tg3:
> > > > tg3 0000:0a:09.1: eth1: Tigon3 [partno(BCM95704) rev 2003]
> > > > (PCIX:133MHz:64- bit) MAC address 00:e0:81:33:5e:af
> > > > tg3 0000:0a:09.1: eth1: attached PHY is 5704 (10/100/1000Base-T
> > > > Ethernet) (WireSpeed[1], EEE[0])
> > > > tg3 0000:0a:09.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0]
> > > > TSOcap[1] tg3 0000:0a:09.1: eth1: dma_rwctrl[769f4000]
> > > > dma_mask[64-bit]
> > > > 
> > > > With 2.6.38.8 everything was working fine. With 3.0.4 there is a
> > > > problem. As soon as tg3 module is loaded or eth0 configured (can't
> > > > tell which one since the machine is 400km away from me and I have no
> > > > way to play with it other than ipmi or ssh) BMC stops responding (so
> > > > all ipmitool commands over LAN stop working). Normal tg3 activity is
> > > > not affected - I can ssh-in without a problem etc but ipmi over lan
> > > > doesn't work.
> > > > 
> > > > From ssh console "ipmitool lan print" works, shows data but for
> > > > example after "ipmitool mc reset cold" it doesn't recover - ipmitool
> > > > returns "Invalid channel: 255". I have to reboot to 2.6.38.8 and
> > > > then issue "ipmitool mc reset cold" to recover.
> > > > 
> > > > Any idea which tg3 change could break this? Can't bisect this due
> > > > remote access only.
> > > > 
> > > > I was hoping that maybe 9e975cc291d80d5e4562d6bed15ec171e896d69b
> > > > "tg3: Fix io failures after chip reset" will fix things for me but no
> > > > - this doesn't help.
> > > 
> > > What version of the tg3 driver are you working with?
> > 
> > The one in 3.0.4 kernel. I think it's 3.119 (at least modinfo says so).
> 
> Unfortunately there were a lot of changes between 3.117 and 3.119(+).
> Is there any way you can narrow down the gap?

The machines are 400km away from me and it's hard to debug that way then 
ipmi/network conectivity is in stake :-/ I could try some form of bisecting 
but need to know if all git versions between 3.117 and 3.119 were known to be 
safe and working? I don't want to loose any conectivity to this machine.

I was going to try 2.6.39 but it looks like it also uses 3.117 driver.

-- 
Arkadiusz Miśkiewicz        PLD/Linux Team
arekm / maven.pl            http://ftp.pld-linux.org/
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists