Date:	Thu, 10 Nov 2011 16:48:43 -0800
From:	David Daney <david.daney@...ium.com>
To:	Tabi Timur-B04825 <B04825@...escale.com>
CC:	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"davem@...emloft.net" <davem@...emloft.net>,
	"linux-mips@...ux-mips.org" <linux-mips@...ux-mips.org>
Subject: Re: [PATCH] netdev/phy: Use mdiobus_read() so that proper locks are
 taken.

On 11/10/2011 04:29 PM, Tabi Timur-B04825 wrote:
> On Fri, Sep 30, 2011 at 4:51 PM, David Daney<david.daney@...ium.com>  wrote:
>> Accesses to the mdio busses must be done with the mdio_lock to ensure
>> proper operation.  Conveniently we have the helper function
>> mdiobus_read() to do that for us.  Lets use it in get_phy_id() instead
>> of accessing the bus without the lock held.
>>
>> Signed-off-by: David Daney<david.daney@...ium.com>
>> ---
>
> This patch is causing me problems, but I'm not exactly certain how.

I think it is because fsl_pq_mdio_probe() is defective.

You are using the bus, by calling fsl_pq_mdio_find_free(), before the 
driver is registered and initialized by calling  of_mdiobus_register().

At least that is my take on it.

David Daney


> The problems only appear when I add some unrelated code to my platform
> file (p1022ds.c), but the trap is definitely in the phy code:
>
> Fixed MDIO Bus: probed
> INFO: trying to register non-static key.
> the code is fine but needs lockdep annotation.
> turning off the locking correctness validator.
> Call Trace:
> [e685dcc0] [c0008c7c] show_stack+0x44/0x154 (unreliable)
> [e685dd00] [c007bf74] __lock_acquire+0x1374/0x1824
> [e685ddb0] [c007c870] lock_acquire+0x4c/0x68
> [e685ddd0] [c0455fe4] mutex_lock_nested+0x6c/0x394
> [e685de30] [c02acc08] mdiobus_read+0x3c/0x78
> [e685de50] [c02abc98] get_phy_id+0x24/0x80
> [e685de70] [c02b1860] fsl_pq_mdio_probe+0x3ac/0x458
> [e685deb0] [c027ba2c] platform_drv_probe+0x20/0x30
> [e685dec0] [c027a4b0] driver_probe_device+0xa4/0x1d4
> [e685dee0] [c027a6a4] __driver_attach+0xc4/0xc8
> [e685df00] [c027939c] bus_for_each_dev+0x60/0x9c
> [e685df30] [c027a0e4] driver_attach+0x24/0x34
> [e685df40] [c0279d30] bus_add_driver+0x1b0/0x278
> [e685df70] [c027aab8] driver_register+0x88/0x154
> [e685df90] [c027bd5c] platform_driver_register+0x68/0x78
> [e685dfa0] [c05d47c8] fsl_pq_mdio_init+0x18/0x28
> [e685dfb0] [c0001eb8] do_one_initcall+0x34/0x1ac
> [e685dfe0] [c05b984c] kernel_init+0xa0/0x13c
> [e685dff0] [c000e588] kernel_thread+0x4c/0x68
> Unable to handle kernel paging request for data at address 0x00000000
> Faulting instruction address: 0xc0456080
> Oops: Kernel access of bad area, sig: 11 [#1]
> SMP NR_CPUS=8 P1022 DS
> Modules linked in:
> NIP: c0456080 LR: c0456068 CTR: 00000000
> REGS: e685dd20 TRAP: 0300   Not tainted  (3.2.0-10b-00092-g66f2305-dirty)
> MSR: 00021000<ME,CE>   CR: 22042044  XER: 20000000
> DEAR: 00000000, ESR: 00800000
> TASK = e6860000[1] 'swapper' THREAD: e685c000 CPU: 0
> GPR00: ffffffff e685ddd0 e6860000 e6e58028 e685ddd8 e685c000 e685dde4 00000002
> GPR08: 00000000 00000000 00000000 00000000 44042022 40401800 00000000 00000000
> GPR16: c0000a00 00000014 3fffffff 03ff9000 00000015 7ff3a68c c061e000 00000000
> GPR24: e6e5804c e685ddd8 e6e5802c 00029000 e6860000 c0620000 e685c000 e6e58028
> NIP [c0456080] mutex_lock_nested+0x108/0x394
> LR [c0456068] mutex_lock_nested+0xf0/0x394
> Call Trace:
> [e685ddd0] [c0456068] mutex_lock_nested+0xf0/0x394 (unreliable)
> [e685de30] [c02acc08] mdiobus_read+0x3c/0x78
> [e685de50] [c02abc98] get_phy_id+0x24/0x80
> [e685de70] [c02b1860] fsl_pq_mdio_probe+0x3ac/0x458
> [e685deb0] [c027ba2c] platform_drv_probe+0x20/0x30
> [e685dec0] [c027a4b0] driver_probe_device+0xa4/0x1d4
> [e685dee0] [c027a6a4] __driver_attach+0xc4/0xc8
> [e685df00] [c027939c] bus_for_each_dev+0x60/0x9c
> [e685df30] [c027a0e4] driver_attach+0x24/0x34
> [e685df40] [c0279d30] bus_add_driver+0x1b0/0x278
> [e685df70] [c027aab8] driver_register+0x88/0x154
> [e685df90] [c027bd5c] platform_driver_register+0x68/0x78
> [e685dfa0] [c05d47c8] fsl_pq_mdio_init+0x18/0x28
> [e685dfb0] [c0001eb8] do_one_initcall+0x34/0x1ac
> [e685dfe0] [c05b984c] kernel_init+0xa0/0x13c
> [e685dff0] [c000e588] kernel_thread+0x4c/0x68
> Instruction dump:
> 7f24cb78 4bc21141 80bc0004 7fe3fb78 7f24cb78 4bc21325 813f0028 3b1f0024
> 933f0028 3800ffff 93010008 9121000c
>   93810010 7c0004ac 7d20f828
> ---[ end trace 7cc8bbd19b132dac ]---
> note: swapper[1] exited with preempt_count 1
> Kernel panic - not syncing: Attempted to kill init!
> Call Trace:
> [e685dc00] [c0008c7c] show_stack+0x44/0x154 (unreliable)
> [e685dc40] [c04583a0] panic+0xb4/0x1f0
> [e685dc90] [c004724c] do_exit+0x5dc/0x684
> [e685dce0] [c000b368] die+0xdc/0x1b4
> [e685dd00] [c00137fc] bad_page_fault+0xb4/0xfc
> [e685dd10] [c000f998] handle_page_fault+0x7c/0x80
> --- Exception: 300 at mutex_lock_nested+0x108/0x394
>      LR = mutex_lock_nested+0xf0/0x394
> [e685de30] [c02acc08] mdiobus_read+0x3c/0x78
> [e685de50] [c02abc98] get_phy_id+0x24/0x80
> [e685de70] [c02b1860] fsl_pq_mdio_probe+0x3ac/0x458
> [e685deb0] [c027ba2c] platform_drv_probe+0x20/0x30
> [e685dec0] [c027a4b0] driver_probe_device+0xa4/0x1d4
> [e685dee0] [c027a6a4] __driver_attach+0xc4/0xc8
> [e685df00] [c027939c] bus_for_each_dev+0x60/0x9c
> [e685df30] [c027a0e4] driver_attach+0x24/0x34
> [e685df40] [c0279d30] bus_add_driver+0x1b0/0x278
> [e685df70] [c027aab8] driver_register+0x88/0x154
> [e685df90] [c027bd5c] platform_driver_register+0x68/0x78
> [e685dfa0] [c05d47c8] fsl_pq_mdio_init+0x18/0x28
> [e685dfb0] [c0001eb8] do_one_initcall+0x34/0x1ac
> [e685dfe0] [c05b984c] kernel_init+0xa0/0x13c
> [e685dff0] [c000e588] kernel_thread+0x4c/0x68
> Rebooting in 1 seconds..
>
> I'm still trying to narrow down what's causing the problem, but when I
> revert this patch, I don't see these traps.
>
> Sometimes, I don't get the trap, but I get a hang on this line:
>
> int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum)
> {
> 	int retval;
>
> 	BUG_ON(in_interrupt());
>
> --->	mutex_lock(&bus->mdio_lock);
>

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists