| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 23 Dec 2011 01:09:15 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Don Skidmore <donald.c.skidmore@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 7/9] ixgbe: add support functions for gathering thermal data sensor
From: Don Skidmore <donald.c.skidmore@...el.com>
Some 82599 adapters contain thermal data that we can get to via
an i2c interface. These functions provide support to get at that
data. A following patch will export this data.
Signed-off-by: Don Skidmore <donald.c.skidmore@...el.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@...el.com>
Tested-by: Stephen Ko <stephen.s.ko@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 150 +++++++++++++++++++++++
drivers/net/ethernet/intel/ixgbe/ixgbe_common.h | 13 ++
drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 38 ++++++
3 files changed, 201 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index a3aa633..05aa156 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -3526,3 +3526,153 @@ void ixgbe_clear_tx_pending(struct ixgbe_hw *hw)
IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
}
+
+static const u8 ixgbe_emc_temp_data[4] = {
+ IXGBE_EMC_INTERNAL_DATA,
+ IXGBE_EMC_DIODE1_DATA,
+ IXGBE_EMC_DIODE2_DATA,
+ IXGBE_EMC_DIODE3_DATA
+};
+static const u8 ixgbe_emc_therm_limit[4] = {
+ IXGBE_EMC_INTERNAL_THERM_LIMIT,
+ IXGBE_EMC_DIODE1_THERM_LIMIT,
+ IXGBE_EMC_DIODE2_THERM_LIMIT,
+ IXGBE_EMC_DIODE3_THERM_LIMIT
+};
+
+/**
+ * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
+ * @hw: pointer to hardware structure
+ * @data: pointer to the thermal sensor data structure
+ *
+ * Returns the thermal sensor data structure
+ **/
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 i;
+ struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ /* Only support thermal sensors attached to 82599 physical port 0 */
+ if ((hw->mac.type != ixgbe_mac_82599EB) ||
+ (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
+ status = IXGBE_NOT_IMPLEMENTED;
+ goto out;
+ }
+
+ status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, &ets_offset);
+ if (status)
+ goto out;
+
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) {
+ status = IXGBE_NOT_IMPLEMENTED;
+ goto out;
+ }
+
+ status = hw->eeprom.ops.read(hw, ets_offset, &ets_cfg);
+ if (status)
+ goto out;
+
+ if (((ets_cfg & IXGBE_ETS_TYPE_MASK) >> IXGBE_ETS_TYPE_SHIFT)
+ != IXGBE_ETS_TYPE_EMC) {
+ status = IXGBE_NOT_IMPLEMENTED;
+ goto out;
+ }
+
+ num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+ if (num_sensors > IXGBE_MAX_SENSORS)
+ num_sensors = IXGBE_MAX_SENSORS;
+
+ for (i = 0; i < num_sensors; i++) {
+ status = hw->eeprom.ops.read(hw, (ets_offset + 1 + i),
+ &ets_sensor);
+ if (status)
+ goto out;
+
+ sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+ IXGBE_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+ IXGBE_ETS_DATA_LOC_SHIFT);
+
+ if (sensor_location != 0) {
+ status = hw->phy.ops.read_i2c_byte(hw,
+ ixgbe_emc_temp_data[sensor_index],
+ IXGBE_I2C_THERMAL_SENSOR_ADDR,
+ &data->sensor[i].temp);
+ if (status)
+ goto out;
+ }
+ }
+out:
+ return status;
+}
+
+/**
+ * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Inits the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
+ **/
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 low_thresh_delta;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 therm_limit;
+ u8 i;
+ struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data));
+
+ /* Only support thermal sensors attached to 82599 physical port 0 */
+ if ((hw->mac.type != ixgbe_mac_82599EB) ||
+ (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1))
+ return IXGBE_NOT_IMPLEMENTED;
+
+ hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, &ets_offset);
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+ return IXGBE_NOT_IMPLEMENTED;
+
+ hw->eeprom.ops.read(hw, ets_offset, &ets_cfg);
+ if (((ets_cfg & IXGBE_ETS_TYPE_MASK) >> IXGBE_ETS_TYPE_SHIFT)
+ != IXGBE_ETS_TYPE_EMC)
+ return IXGBE_NOT_IMPLEMENTED;
+
+ low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >>
+ IXGBE_ETS_LTHRES_DELTA_SHIFT);
+ num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+
+ for (i = 0; i < num_sensors; i++) {
+ hw->eeprom.ops.read(hw, (ets_offset + 1 + i), &ets_sensor);
+ sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+ IXGBE_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+ IXGBE_ETS_DATA_LOC_SHIFT);
+ therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK;
+
+ hw->phy.ops.write_i2c_byte(hw,
+ ixgbe_emc_therm_limit[sensor_index],
+ IXGBE_I2C_THERMAL_SENSOR_ADDR, therm_limit);
+
+ if ((i < IXGBE_MAX_SENSORS) && (sensor_location != 0)) {
+ data->sensor[i].location = sensor_location;
+ data->sensor[i].caution_thresh = therm_limit;
+ data->sensor[i].max_op_thresh = therm_limit -
+ low_thresh_delta;
+ }
+ }
+ return status;
+}
+
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index 863f9c1..876c7f3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -105,6 +105,19 @@ void ixgbe_clear_tx_pending(struct ixgbe_hw *hw);
void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb,
u32 headroom, int strategy);
+#define IXGBE_I2C_THERMAL_SENSOR_ADDR 0xF8
+#define IXGBE_EMC_INTERNAL_DATA 0x00
+#define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20
+#define IXGBE_EMC_DIODE1_DATA 0x01
+#define IXGBE_EMC_DIODE1_THERM_LIMIT 0x19
+#define IXGBE_EMC_DIODE2_DATA 0x23
+#define IXGBE_EMC_DIODE2_THERM_LIMIT 0x1A
+#define IXGBE_EMC_DIODE3_DATA 0x2A
+#define IXGBE_EMC_DIODE3_THERM_LIMIT 0x30
+
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw);
+
#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
#ifndef writeq
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 7c5817f..c5fba00 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -109,6 +109,26 @@
#define IXGBE_I2C_CLK_OUT 0x00000002
#define IXGBE_I2C_DATA_IN 0x00000004
#define IXGBE_I2C_DATA_OUT 0x00000008
+#define IXGBE_I2C_THERMAL_SENSOR_ADDR 0xF8
+#define IXGBE_EMC_INTERNAL_DATA 0x00
+#define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20
+#define IXGBE_EMC_DIODE1_DATA 0x01
+#define IXGBE_EMC_DIODE1_THERM_LIMIT 0x19
+#define IXGBE_EMC_DIODE2_DATA 0x23
+#define IXGBE_EMC_DIODE2_THERM_LIMIT 0x1A
+
+#define IXGBE_MAX_SENSORS 3
+
+struct ixgbe_thermal_diode_data {
+ u8 location;
+ u8 temp;
+ u8 caution_thresh;
+ u8 max_op_thresh;
+};
+
+struct ixgbe_thermal_sensor_data {
+ struct ixgbe_thermal_diode_data sensor[IXGBE_MAX_SENSORS];
+};
/* Interrupt Registers */
#define IXGBE_EICR 0x00800
@@ -1674,6 +1694,21 @@ enum {
#define IXGBE_PBANUM0_PTR 0x15
#define IXGBE_PBANUM1_PTR 0x16
#define IXGBE_FREE_SPACE_PTR 0X3E
+
+/* External Thermal Sensor Config */
+#define IXGBE_ETS_CFG 0x26
+#define IXGBE_ETS_LTHRES_DELTA_MASK 0x07C0
+#define IXGBE_ETS_LTHRES_DELTA_SHIFT 6
+#define IXGBE_ETS_TYPE_MASK 0x0038
+#define IXGBE_ETS_TYPE_SHIFT 3
+#define IXGBE_ETS_TYPE_EMC 0x000
+#define IXGBE_ETS_NUM_SENSORS_MASK 0x0007
+#define IXGBE_ETS_DATA_LOC_MASK 0x3C00
+#define IXGBE_ETS_DATA_LOC_SHIFT 10
+#define IXGBE_ETS_DATA_INDEX_MASK 0x0300
+#define IXGBE_ETS_DATA_INDEX_SHIFT 8
+#define IXGBE_ETS_DATA_HTHRESH_MASK 0x00FF
+
#define IXGBE_SAN_MAC_ADDR_PTR 0x28
#define IXGBE_DEVICE_CAPS 0x2C
#define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11
@@ -2767,6 +2802,8 @@ struct ixgbe_mac_operations {
/* Manageability interface */
s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
+ s32 (*get_thermal_sensor_data)(struct ixgbe_hw *);
+ s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw);
};
struct ixgbe_phy_operations {
@@ -2824,6 +2861,7 @@ struct ixgbe_mac_info {
bool orig_link_settings_stored;
bool autotry_restart;
u8 flags;
+ struct ixgbe_thermal_sensor_data thermal_sensor_data;
};
struct ixgbe_phy_info {
--
1.7.7.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists