| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 6 Feb 2012 17:04:23 -0800
From: Stephen Hemminger <shemminger@...tta.com>
To: David Miller <davem@...emloft.net>
Cc: Alban Browaeys <prahal@...oo.com>, netdev@...r.kernel.org,
Guillaume Chazarain <guichaz@...il.com>,
Nick Bowler <nbowler@...iptictech.com>
Subject: PATCH] Revert "skge: check for PCI dma mapping errors"
As reported by several people...
The code in rx_clean was panic'ing so revert
commit d0249e44432aa0ffcf710b64449b8eaa3722547e.
Will redo DMA mapping checks as new patches for a later release.
Signed-off-by: Stephen Hemminger <shemminger@...tta.com>
---
drivers/net/ethernet/marvell/skge.c | 71 ++++++----------------------------
1 files changed, 13 insertions(+), 58 deletions(-)
diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c
index edb9bda..33947ac 100644
--- a/drivers/net/ethernet/marvell/skge.c
+++ b/drivers/net/ethernet/marvell/skge.c
@@ -931,20 +931,17 @@ static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u32 base)
}
/* Allocate and setup a new buffer for receiving */
-static int skge_rx_setup(struct pci_dev *pdev,
- struct skge_element *e,
- struct sk_buff *skb, unsigned int bufsize)
+static void skge_rx_setup(struct skge_port *skge, struct skge_element *e,
+ struct sk_buff *skb, unsigned int bufsize)
{
struct skge_rx_desc *rd = e->desc;
- dma_addr_t map;
+ u64 map;
- map = pci_map_single(pdev, skb->data, bufsize,
+ map = pci_map_single(skge->hw->pdev, skb->data, bufsize,
PCI_DMA_FROMDEVICE);
- if (pci_dma_mapping_error(pdev, map))
- goto mapping_error;
- rd->dma_lo = lower_32_bits(map);
- rd->dma_hi = upper_32_bits(map);
+ rd->dma_lo = map;
+ rd->dma_hi = map >> 32;
e->skb = skb;
rd->csum1_start = ETH_HLEN;
rd->csum2_start = ETH_HLEN;
@@ -956,13 +953,6 @@ static int skge_rx_setup(struct pci_dev *pdev,
rd->control = BMU_OWN | BMU_STF | BMU_IRQ_EOF | BMU_TCP_CHECK | bufsize;
dma_unmap_addr_set(e, mapaddr, map);
dma_unmap_len_set(e, maplen, bufsize);
- return 0;
-
-mapping_error:
- if (net_ratelimit())
- dev_warn(&pdev->dev, "%s: rx mapping error\n",
- skb->dev->name);
- return -EIO;
}
/* Resume receiving using existing skb,
@@ -1024,11 +1014,7 @@ static int skge_rx_fill(struct net_device *dev)
return -ENOMEM;
skb_reserve(skb, NET_IP_ALIGN);
- if (skge_rx_setup(skge->hw->pdev, e, skb, skge->rx_buf_size)) {
- kfree_skb(skb);
- return -ENOMEM;
- }
-
+ skge_rx_setup(skge, e, skb, skge->rx_buf_size);
} while ((e = e->next) != ring->start);
ring->to_clean = ring->start;
@@ -2743,7 +2729,7 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
struct skge_tx_desc *td;
int i;
u32 control, len;
- dma_addr_t map;
+ u64 map;
if (skb_padto(skb, ETH_ZLEN))
return NETDEV_TX_OK;
@@ -2757,14 +2743,11 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
e->skb = skb;
len = skb_headlen(skb);
map = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
- if (pci_dma_mapping_error(hw->pdev, map))
- goto mapping_error;
-
dma_unmap_addr_set(e, mapaddr, map);
dma_unmap_len_set(e, maplen, len);
- td->dma_lo = lower_32_bits(map);
- td->dma_hi = upper_32_bits(map);
+ td->dma_lo = map;
+ td->dma_hi = map >> 32;
if (skb->ip_summed == CHECKSUM_PARTIAL) {
const int offset = skb_checksum_start_offset(skb);
@@ -2795,16 +2778,14 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
map = skb_frag_dma_map(&hw->pdev->dev, frag, 0,
skb_frag_size(frag), DMA_TO_DEVICE);
- if (dma_mapping_error(&hw->pdev->dev, map))
- goto mapping_unwind;
e = e->next;
e->skb = skb;
tf = e->desc;
BUG_ON(tf->control & BMU_OWN);
- tf->dma_lo = lower_32_bits(map);
- tf->dma_hi = upper_32_bits(map);
+ tf->dma_lo = map;
+ tf->dma_hi = (u64) map >> 32;
dma_unmap_addr_set(e, mapaddr, map);
dma_unmap_len_set(e, maplen, skb_frag_size(frag));
@@ -2834,28 +2815,6 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
}
return NETDEV_TX_OK;
-
-mapping_unwind:
- /* unroll any pages that were already mapped. */
- if (e != skge->tx_ring.to_use) {
- struct skge_element *u;
-
- for (u = skge->tx_ring.to_use->next; u != e; u = u->next)
- pci_unmap_page(hw->pdev, dma_unmap_addr(u, mapaddr),
- dma_unmap_len(u, maplen),
- PCI_DMA_TODEVICE);
- e = skge->tx_ring.to_use;
- }
- /* undo the mapping for the skb header */
- pci_unmap_single(hw->pdev, dma_unmap_addr(e, mapaddr),
- dma_unmap_len(e, maplen),
- PCI_DMA_TODEVICE);
-mapping_error:
- /* mapping error causes error message and packet to be discarded. */
- if (net_ratelimit())
- dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name);
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
}
@@ -3099,17 +3058,13 @@ static struct sk_buff *skge_rx_get(struct net_device *dev,
if (!nskb)
goto resubmit;
- if (unlikely(skge_rx_setup(skge->hw->pdev, e, nskb, skge->rx_buf_size))) {
- dev_kfree_skb(nskb);
- goto resubmit;
- }
-
pci_unmap_single(skge->hw->pdev,
dma_unmap_addr(e, mapaddr),
dma_unmap_len(e, maplen),
PCI_DMA_FROMDEVICE);
skb = e->skb;
prefetch(skb->data);
+ skge_rx_setup(skge, e, nskb, skge->rx_buf_size);
}
skb_put(skb, len);
--
1.7.8.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists