netdev - Re: [PATCH][RFC] bonding: delete migrated IP addresses from the rlb hash table

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 23 Mar 2012 15:10:15 +0800
From:	WeipingPan <panweiping3@...il.com>
To:	Jiri Bohac <jbohac@...e.cz>
CC:	Jay Vosburgh <fubar@...ibm.com>,
	Andy Gospodarek <andy@...yhouse.net>, netdev@...r.kernel.org
Subject: Re: [PATCH][RFC] bonding: delete migrated IP addresses from the rlb
 hash table

On 02/28/2012 01:34 AM, Jiri Bohac wrote:
> Bonding in balance-alb mode records information from ARP packets
> passing through the bond in a hash table (rx_hashtbl).
>
> At certain situations (e.g. link change of a slave),
> rlb_update_rx_clients() will send out ARP packets to update ARP
> caches of other hosts on the network to achieve RX load balancing.
>
> The problem is that once an IP address is recorded in the hash
> table, it stays there indefinitely [1]. If this IP address is
> migrated to a different host in the network, bonding still sends
> out ARP packets that poison other systems' ARP caches with
> invalid information.
>
> This patch solves this by looking at all incoming ARP packets,
> and checking if the source IP address is one of the source
> addresses stored in the rx_hashtbl. If it is, the corresponding
> hash table entries are removed. Thus, when an IP address is
> migrated, the first ARP broadcast by its new owner will purge the
> offending entries of rx_hashtbl.
>
>    (a simpler approach, where bonding would monitor IP address
>     changes on the local system does not work for setups like:
>     HostA --- NetworkA --- eth0-bond0-br0 --- NetworkB --- hostB
>     and an IP address migrating from HostB to HostA)
Hi, Jiri,
Do "NetworkA" and "NetworkB" mean different subnet ?
How to configure bonding and bridge to make HostA communicate with hostB ?
What is the problem for this setup ?

I will appreciate it if you can elaborate the problem.

thanks
Weiping Pan



--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html