| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 5 Jun 2012 07:22:57 +0200
From: Giuseppe CAVALLARO <peppe.cavallaro@...com>
To: netdev@...r.kernel.org
Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>,
Rayagond Kokatanur <rayagond@...avyalabs.com>
Subject: [PATCH (net.git) 3/3 (v3)] stmmac: fix driver Kconfig when built as module
This patches fixes the driver when built as dynamic module.
In fact, the platform part cannot be built and the probe fails
(thanks to Bob Liu that reported this bug).
v2: as D. Miller suggested, it is not necessary to make the
pci and the platform code mutually exclusive.
Having both could also help, at built time ,to verify that
all the code is validated and compiles fine.
v3: removed wrong Reviewed-by from the patch
Reported-by: Bob Liu <lliubbo@...il.com>
cc: Rayagond Kokatanur <rayagond@...avyalabs.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@...com>
---
drivers/net/ethernet/stmicro/stmmac/Kconfig | 5 +--
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 3 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 25 +++++++++++++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 29 +-------------------
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 4 +--
5 files changed, 31 insertions(+), 35 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 0364283..0076f77 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -13,9 +13,8 @@ config STMMAC_ETH
if STMMAC_ETH
config STMMAC_PLATFORM
- tristate "STMMAC platform bus support"
+ bool "STMMAC Platform bus support"
depends on STMMAC_ETH
- default y
---help---
This selects the platform specific bus support for
the stmmac device driver. This is the driver used
@@ -26,7 +25,7 @@ config STMMAC_PLATFORM
If unsure, say N.
config STMMAC_PCI
- tristate "STMMAC support on PCI bus (EXPERIMENTAL)"
+ bool "STMMAC PCI bus support (EXPERIMENTAL)"
depends on STMMAC_ETH && PCI && EXPERIMENTAL
---help---
This is to select the Synopsys DWMAC available on PCI devices,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 6b5d060..6d07ba2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -95,7 +95,8 @@ extern int stmmac_mdio_register(struct net_device *ndev);
extern void stmmac_set_ethtool_ops(struct net_device *netdev);
extern const struct stmmac_desc_ops enh_desc_ops;
extern const struct stmmac_desc_ops ndesc_ops;
-
+extern struct pci_driver stmmac_pci_driver;
+extern struct platform_driver stmmac_pltfr_driver;
int stmmac_freeze(struct net_device *ndev);
int stmmac_restore(struct net_device *ndev);
int stmmac_resume(struct net_device *ndev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index ea33eae..3638569 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -42,6 +42,7 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/prefetch.h>
+#include <linux/pci.h>
#ifdef CONFIG_STMMAC_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
@@ -2093,6 +2094,30 @@ int stmmac_restore(struct net_device *ndev)
}
#endif /* CONFIG_PM */
+static int __init stmmac_init(void)
+{
+ int err = 0;
+
+ err = platform_driver_register(&stmmac_pltfr_driver);
+
+ if (!err) {
+ err = pci_register_driver(&stmmac_pci_driver);
+ if (err)
+ platform_driver_unregister(&stmmac_pltfr_driver);
+ }
+
+ return err;
+}
+
+static void __exit stmmac_exit(void)
+{
+ pci_unregister_driver(&stmmac_pci_driver);
+ platform_driver_unregister(&stmmac_pltfr_driver);
+}
+
+module_init(stmmac_init);
+module_exit(stmmac_exit);
+
#ifndef MODULE
static int __init stmmac_cmdline_opt(char *str)
{
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 58fab53..cf826e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -179,7 +179,7 @@ static DEFINE_PCI_DEVICE_TABLE(stmmac_id_table) = {
MODULE_DEVICE_TABLE(pci, stmmac_id_table);
-static struct pci_driver stmmac_driver = {
+struct pci_driver stmmac_pci_driver = {
.name = STMMAC_RESOURCE_NAME,
.id_table = stmmac_id_table,
.probe = stmmac_pci_probe,
@@ -190,33 +190,6 @@ static struct pci_driver stmmac_driver = {
#endif
};
-/**
- * stmmac_init_module - Entry point for the driver
- * Description: This function is the entry point for the driver.
- */
-static int __init stmmac_init_module(void)
-{
- int ret;
-
- ret = pci_register_driver(&stmmac_driver);
- if (ret < 0)
- pr_err("%s: ERROR: driver registration failed\n", __func__);
-
- return ret;
-}
-
-/**
- * stmmac_cleanup_module - Cleanup routine for the driver
- * Description: This function is the cleanup routine for the driver.
- */
-static void __exit stmmac_cleanup_module(void)
-{
- pci_unregister_driver(&stmmac_driver);
-}
-
-module_init(stmmac_init_module);
-module_exit(stmmac_cleanup_module);
-
MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PCI driver");
MODULE_AUTHOR("Rayagond Kokatanur <rayagond.kokatanur@...avyalabs.com>");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@...com>");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 3dd8f08..680d2b8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -255,7 +255,7 @@ static const struct of_device_id stmmac_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
-static struct platform_driver stmmac_driver = {
+struct platform_driver stmmac_pltfr_driver = {
.probe = stmmac_pltfr_probe,
.remove = stmmac_pltfr_remove,
.driver = {
@@ -266,8 +266,6 @@ static struct platform_driver stmmac_driver = {
},
};
-module_platform_driver(stmmac_driver);
-
MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PLATFORM driver");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@...com>");
MODULE_LICENSE("GPL");
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists