| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 14 Jun 2012 22:53:57 -0700
From: Joe Perches <joe@...ches.com>
To: "John W. Linville" <linville@...driver.com>,
Herton Ronaldo Krzesinski <herton@...onical.com>,
Hin-Tak Leung <htl10@...rs.sourceforge.net>,
Larry Finger <Larry.Finger@...inger.net>
Cc: linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH wireless-next 17/20] rtl818x: Use pr_<level>
Use a more current logging style.
Convert printks to pr_<level>.
Convert printk(KERN_DEBUG to pr_debug(.
Coalesce formats, align arguments.
Signed-off-by: Joe Perches <joe@...ches.com>
---
drivers/net/wireless/rtl818x/rtl8180/dev.c | 35 ++++++++++---------------
drivers/net/wireless/rtl818x/rtl8187/dev.c | 15 +++++-----
drivers/net/wireless/rtl818x/rtl8187/leds.c | 6 +++-
drivers/net/wireless/rtl818x/rtl8187/rfkill.c | 9 +++---
4 files changed, 30 insertions(+), 35 deletions(-)
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 2bebcb7..b0818a9 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -15,6 +15,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
@@ -913,15 +915,13 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
err = pci_enable_device(pdev);
if (err) {
- printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n",
- pci_name(pdev));
+ pr_err("%s: Cannot enable new PCI device\n", pci_name(pdev));
return err;
}
err = pci_request_regions(pdev, KBUILD_MODNAME);
if (err) {
- printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n",
- pci_name(pdev));
+ pr_err("%s: Cannot obtain PCI resources\n", pci_name(pdev));
return err;
}
@@ -932,16 +932,14 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
if (mem_len < sizeof(struct rtl818x_csr) ||
io_len < sizeof(struct rtl818x_csr)) {
- printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n",
- pci_name(pdev));
+ pr_err("%s: Too short PCI resources\n", pci_name(pdev));
err = -ENOMEM;
goto err_free_reg;
}
if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) ||
(err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))) {
- printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n",
- pci_name(pdev));
+ pr_err("%s: No suitable DMA available\n", pci_name(pdev));
goto err_free_reg;
}
@@ -949,8 +947,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops);
if (!dev) {
- printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n",
- pci_name(pdev));
+ pr_err("%s: ieee80211 alloc failed\n", pci_name(pdev));
err = -ENOMEM;
goto err_free_reg;
}
@@ -967,8 +964,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
priv->map = pci_iomap(pdev, 0, io_len);
if (!priv->map) {
- printk(KERN_ERR "%s (rtl8180): Cannot map device memory\n",
- pci_name(pdev));
+ pr_err("%s: Cannot map device memory\n", pci_name(pdev));
goto err_free_dev;
}
@@ -1010,8 +1006,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
chip_name = "RTL8185vD";
break;
default:
- printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
- pci_name(pdev), reg >> 25);
+ pr_err("%s: Unknown chip! (0x%x)\n", pci_name(pdev), reg >> 25);
goto err_iounmap;
}
@@ -1052,13 +1047,12 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
rf_name = "RTL8255";
break;
default:
- printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n",
- pci_name(pdev), eeprom_val);
+ pr_err("%s: Unknown RF! (0x%x)\n", pci_name(pdev), eeprom_val);
goto err_iounmap;
}
if (!priv->rf) {
- printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n",
+ pr_err("%s: %s RF frontend not supported!\n",
pci_name(pdev), rf_name);
goto err_iounmap;
}
@@ -1074,8 +1068,8 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)mac_addr, 3);
if (!is_valid_ether_addr(mac_addr)) {
- printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
- " randomly generated MAC addr\n", pci_name(pdev));
+ pr_warn("%s: Invalid hwaddr! Using randomly generated MAC addr\n",
+ pci_name(pdev));
random_ether_addr(mac_addr);
}
SET_IEEE80211_PERM_ADDR(dev, mac_addr);
@@ -1104,8 +1098,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
err = ieee80211_register_hw(dev);
if (err) {
- printk(KERN_ERR "%s (rtl8180): Cannot register device\n",
- pci_name(pdev));
+ pr_err("%s: Cannot register device\n", pci_name(pdev));
goto err_iounmap;
}
diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
index 4fb1ca1..ae631b4 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -20,6 +20,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/usb.h>
#include <linux/slab.h>
@@ -1425,7 +1427,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
if (!dev) {
- printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n");
+ pr_err("ieee80211 alloc failed\n");
return -ENOMEM;
}
@@ -1484,8 +1486,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR,
(__le16 __force *)mac_addr, 3);
if (!is_valid_ether_addr(mac_addr)) {
- printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly "
- "generated MAC address\n");
+ pr_warn("Invalid hwaddr! Using randomly generated MAC address\n");
random_ether_addr(mac_addr);
}
SET_IEEE80211_PERM_ADDR(dev, mac_addr);
@@ -1540,8 +1541,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
* only uses it in their sources
*/
/*if (priv->asic_rev == 0) {
- printk(KERN_WARNING "rtl8187: Forcing use of USB "
- "requests to write to radio registers\n");
+ pr_warn("Forcing use of USB requests to write to radio registers\n");
priv->asic_rev = 1;
}*/
switch (rtl818x_ioread8(priv, (u8 *)0xFFE1)) {
@@ -1595,8 +1595,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
BIT(NL80211_IFTYPE_ADHOC) ;
if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
- printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
- " info!\n");
+ pr_info("inconsistency between id with OEM info!\n");
priv->rf = rtl8187_detect_rf(dev);
dev->extra_tx_headroom = (!priv->is_rtl8187b) ?
@@ -1609,7 +1608,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
err = ieee80211_register_hw(dev);
if (err) {
- printk(KERN_ERR "rtl8187: Cannot register device\n");
+ pr_err("Cannot register device\n");
goto err_free_dmabuf;
}
mutex_init(&priv->conf_mutex);
diff --git a/drivers/net/wireless/rtl818x/rtl8187/leds.c b/drivers/net/wireless/rtl818x/rtl8187/leds.c
index c2d5b49..ad6bde4 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/leds.c
@@ -15,6 +15,8 @@
#ifdef CONFIG_RTL8187_LEDS
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <net/mac80211.h>
#include <linux/usb.h>
#include <linux/eeprom_93cx6.h>
@@ -154,7 +156,7 @@ static int rtl8187_register_led(struct ieee80211_hw *dev,
err = led_classdev_register(&priv->udev->dev, &led->led_dev);
if (err) {
- printk(KERN_INFO "LEDs: Failed to register %s\n", name);
+ pr_info("Failed to register %s\n", name);
led->dev = NULL;
return err;
}
@@ -181,7 +183,7 @@ void rtl8187_leds_init(struct ieee80211_hw *dev, u16 custid)
/* According to the vendor driver, the LED operation depends on the
* customer ID encoded in the EEPROM
*/
- printk(KERN_INFO "rtl8187: Customer ID is 0x%02X\n", custid);
+ pr_info("Customer ID is 0x%02X\n", custid);
switch (custid) {
case EEPROM_CID_RSVD0:
case EEPROM_CID_RSVD1:
diff --git a/drivers/net/wireless/rtl818x/rtl8187/rfkill.c b/drivers/net/wireless/rtl818x/rtl8187/rfkill.c
index 3411671..cc9223f 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/rfkill.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/rfkill.c
@@ -13,6 +13,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/usb.h>
#include <net/mac80211.h>
@@ -36,8 +38,7 @@ void rtl8187_rfkill_init(struct ieee80211_hw *hw)
struct rtl8187_priv *priv = hw->priv;
priv->rfkill_off = rtl8187_is_radio_enabled(priv);
- printk(KERN_INFO "rtl8187: wireless switch is %s\n",
- priv->rfkill_off ? "on" : "off");
+ pr_info("wireless switch is %s\n", priv->rfkill_off ? "on" : "off");
wiphy_rfkill_set_hw_state(hw->wiphy, !priv->rfkill_off);
wiphy_rfkill_start_polling(hw->wiphy);
}
@@ -51,8 +52,8 @@ void rtl8187_rfkill_poll(struct ieee80211_hw *hw)
enabled = rtl8187_is_radio_enabled(priv);
if (unlikely(enabled != priv->rfkill_off)) {
priv->rfkill_off = enabled;
- printk(KERN_INFO "rtl8187: wireless radio switch turned %s\n",
- enabled ? "on" : "off");
+ pr_info("wireless radio switch turned %s\n",
+ enabled ? "on" : "off");
wiphy_rfkill_set_hw_state(hw->wiphy, !enabled);
}
mutex_unlock(&priv->conf_mutex);
--
1.7.8.111.gad25c.dirty
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists