netdev - Re: [PATCH] bnx2: turn off the network statck during initialization

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 16 Aug 2012 11:57:11 -0700
From:	"Michael Chan" <mchan@...adcom.com>
To:	"Jiang Wang" <Jiang.Wang@...erbed.com>
cc:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	clala@...erbed.com, Francis.St.Amant@...erbed.com,
	"Jiang Wang" <jwang@...erbed.com>
Subject: Re: [PATCH] bnx2: turn off the network statck during
 initialization

On Thu, 2012-08-16 at 11:21 -0700, Jiang Wang wrote: 
> The initialization state of bnx2 driver is wrong. It does not turn
> of the Linux network stack using netif_carrier_off. This may lead to
> inconsistent report from ethtool as the link is up but speed is
> unknown when the cable is not plugged in.
> 
> E.g.
>         Speed: Unknown! (0)<--------------------------------------
>         Duplex: Half       <--------------------------------------
>         MDI: Unknown! (0)
>         Port: Twisted Pair
>         PHYAD: 1
>         Transceiver: internal
>         Auto-negotiation: on
>         Supports Wake-on: g
>         Wake-on: d
>         Link detected: yes <---------------------------------------
> 
> This patches fixed the problem by turning off the network stack
> during initialization.
> 
> Signed-off-by: Jiang Wang <jwang@...erbed.com>
> ---
>  drivers/net/ethernet/broadcom/bnx2.c |    4 ++++
>  1 files changed, 4 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
> index ac7b744..ce4548d 100644
> --- a/drivers/net/ethernet/broadcom/bnx2.c
> +++ b/drivers/net/ethernet/broadcom/bnx2.c
> @@ -8463,6 +8463,10 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
>  	dev->features |= dev->hw_features;
>  	dev->priv_flags |= IFF_UNICAST_FLT;
>  
> +	/* tell the stack to leave us alone until bnx2_open() is called */
> +	netif_carrier_off(dev);

We have tried this before and this didn't work.  netif_carrier_off()
calls linkwatch_fire_event() to schedule the event.  If
register_netdev() fails for whatever reason, the netdev will be freed
but the link_watch event may still be scheduled.

Calling netif_carrier_off() after register_netdev() returns successfully
also may not work as it will race with bnx2_open() which enables IRQ.
An linkup IRQ can happen at time and we may end up with the wrong
carrier state because of the race condition.

> +	netif_stop_queue(dev);
> +
>  	if ((rc = register_netdev(dev))) {
>  		dev_err(&pdev->dev, "Cannot register net device\n");
>  		goto error;



--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html