| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 11 Sep 2012 08:55:11 +0200
From: Giuseppe CAVALLARO <peppe.cavallaro@...com>
To: netdev@...r.kernel.org
Cc: bhutchings@...arflare.com, davem@...emloft.net,
Giuseppe Cavallaro <peppe.cavallaro@...com>
Subject: [net-next.git 5/8 (V2)] stmmac: get/set coalesce parameters via ethtool
This patch is to get/set the tx/rx coalesce parameters
via ethtool interface.
Tests have been done on several platform with
different GMAC chips w/o w/ RX watchdog feature.
V2: reject coalesce settings that are not supported.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@...com>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 8 ++-
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 +
.../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 85 ++++++++++++++++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 20 +++---
4 files changed, 103 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 02eb2da..b9033cc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -169,7 +169,13 @@ struct stmmac_extra_stats {
#define DMA_HW_FEAT_SAVLANINS 0x08000000 /* Source Addr or VLAN Insertion */
#define DMA_HW_FEAT_ACTPHYIF 0x70000000 /* Active/selected PHY interface */
#define DEFAULT_DMA_PBL 8
-#define DEFAULT_DMA_RIWT 0xff /* Max RI Watchdog Timer count */
+
+/* Coalesce defines */
+#define MAX_DMA_RIWT 0xff /* Max RI Watchdog Timer count */
+#define MIN_DMA_RIWT 0x20
+#define STMMAC_COAL_TX_TIMER 40000
+#define STMMAC_MAX_COAL_TX_TICK 100000
+#define STMMAC_TX_MAX_FRAMES 32
enum rx_frame_status { /* IPC status */
good_frame = 0,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 6901e3c..ad4f6b9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -93,6 +93,7 @@ struct stmmac_priv {
u32 tx_count_frames;
u32 tx_coal_frames;
u32 tx_coal_timer;
+ u32 rx_riwt;
};
extern int phyaddr;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 48ad0bc..d27cc18 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -522,6 +522,89 @@ static int stmmac_ethtool_op_set_eee(struct net_device *dev,
return phy_ethtool_set_eee(priv->phydev, edata);
}
+static u32 stmmac_usec2riwt(u32 usec, struct stmmac_priv *priv)
+{
+ unsigned long clk = clk_get_rate(priv->stmmac_clk);
+
+ if (!clk)
+ return 0;
+
+ return (usec * (clk / 1000000)) / 256;
+}
+
+static u32 stmmac_riwt2usec(u32 riwt, struct stmmac_priv *priv)
+{
+ unsigned long clk = clk_get_rate(priv->stmmac_clk);
+
+ if (!clk)
+ return 0;
+
+ return (riwt * 256) / (clk / 1000000);
+}
+
+static int stmmac_get_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ec)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ ec->tx_coalesce_usecs = priv->tx_coal_timer;
+ ec->tx_max_coalesced_frames = priv->tx_coal_frames;
+
+ if (priv->use_riwt)
+ ec->rx_coalesce_usecs = stmmac_riwt2usec(priv->rx_riwt, priv);
+
+ return 0;
+}
+
+static int stmmac_set_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ec)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned int rx_riwt;
+
+ /* Check not supported parameters */
+ if ((ec->rx_max_coalesced_frames) || (ec->rx_coalesce_usecs_irq) ||
+ (ec->rx_max_coalesced_frames_irq) || (ec->tx_coalesce_usecs_irq) ||
+ (ec->use_adaptive_rx_coalesce) || (ec->use_adaptive_tx_coalesce) ||
+ (ec->pkt_rate_low) || (ec->rx_coalesce_usecs_low) ||
+ (ec->rx_max_coalesced_frames_low) || (ec->tx_coalesce_usecs_high) ||
+ (ec->tx_max_coalesced_frames_low) || (ec->pkt_rate_high) ||
+ (ec->tx_coalesce_usecs_low) || (ec->rx_coalesce_usecs_high) ||
+ (ec->rx_max_coalesced_frames_high) ||
+ (ec->tx_max_coalesced_frames_irq) ||
+ (ec->stats_block_coalesce_usecs) ||
+ (ec->tx_max_coalesced_frames_high) || (ec->rate_sample_interval))
+ return -EOPNOTSUPP;
+
+ /* No rx interrupts will be generated if both are zero */
+ if (ec->rx_coalesce_usecs == 0)
+ return -EINVAL;
+
+ /* No tx interrupts will be generated if both are zero */
+ if ((ec->tx_coalesce_usecs == 0) &&
+ (ec->tx_max_coalesced_frames == 0))
+ return -EINVAL;
+
+ if ((ec->tx_coalesce_usecs > STMMAC_COAL_TX_TIMER) ||
+ (ec->tx_max_coalesced_frames > STMMAC_TX_MAX_FRAMES))
+ return -EINVAL;
+
+ rx_riwt = stmmac_usec2riwt(ec->rx_coalesce_usecs, priv);
+
+ if ((rx_riwt > MAX_DMA_RIWT) || (rx_riwt < MIN_DMA_RIWT))
+ return -EINVAL;
+ else if (!priv->use_riwt)
+ return -EOPNOTSUPP;
+
+ /* Only copy relevant parameters, ignore all others. */
+ priv->tx_coal_frames = ec->tx_max_coalesced_frames;
+ priv->tx_coal_timer = ec->tx_coalesce_usecs;
+ priv->rx_riwt = rx_riwt;
+ priv->hw->dma->rx_watchdog(priv->ioaddr, priv->rx_riwt);
+
+ return 0;
+}
+
static const struct ethtool_ops stmmac_ethtool_ops = {
.begin = stmmac_check_if_running,
.get_drvinfo = stmmac_ethtool_getdrvinfo,
@@ -542,6 +625,8 @@ static const struct ethtool_ops stmmac_ethtool_ops = {
.set_eee = stmmac_ethtool_op_set_eee,
.get_sset_count = stmmac_get_sset_count,
.get_ts_info = ethtool_op_get_ts_info,
+ .get_coalesce = stmmac_get_coalesce,
+ .set_coalesce = stmmac_set_coalesce,
};
void stmmac_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8e610a1..b0731e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -77,8 +77,6 @@
#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
#define JUMBO_LEN 9000
-#define STMMAC_TX_TM 40000
-#define STMMAC_TX_MAX_FRAMES 32 /* Max coalesced frame */
/* Module parameters */
#define TX_TIMEO 5000 /* default 5 seconds */
@@ -140,6 +138,8 @@ static int stmmac_init_fs(struct net_device *dev);
static void stmmac_exit_fs(void);
#endif
+#define STMMAC_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x))
+
/**
* stmmac_verify_args - verify the driver parameters.
* Description: it verifies if some wrong parameter is passed to the driver.
@@ -996,9 +996,9 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv)
{
/* Set Tx coalesce parameters and timers */
priv->tx_coal_frames = STMMAC_TX_MAX_FRAMES;
- priv->tx_coal_timer = jiffies + usecs_to_jiffies(STMMAC_TX_TM);
+ priv->tx_coal_timer = STMMAC_COAL_TX_TIMER;
init_timer(&priv->txtimer);
- priv->txtimer.expires = priv->tx_coal_timer;
+ priv->txtimer.expires = STMMAC_COAL_TIMER(priv->tx_coal_timer);
priv->txtimer.data = (unsigned long)priv;
priv->txtimer.function = stmmac_txtimer;
add_timer(&priv->txtimer);
@@ -1118,11 +1118,10 @@ static int stmmac_open(struct net_device *dev)
stmmac_init_tx_coalesce(priv);
- if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog))
- /* Program RX Watchdog register to the default values
- * FIXME: provide user value for RIWT
- */
- priv->hw->dma->rx_watchdog(priv->ioaddr, DEFAULT_DMA_RIWT);
+ if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) {
+ priv->rx_riwt = MAX_DMA_RIWT;
+ priv->hw->dma->rx_watchdog(priv->ioaddr, MAX_DMA_RIWT);
+ }
napi_enable(&priv->napi);
@@ -1299,7 +1298,8 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
priv->xstats.tx_reset_ic_bit++;
TX_DBG("\t[entry %d]: tx_count_frames %d\n", entry,
priv->tx_count_frames);
- mod_timer(&priv->txtimer, priv->tx_coal_timer);
+ mod_timer(&priv->txtimer,
+ STMMAC_COAL_TIMER(priv->tx_coal_timer));
} else
priv->tx_count_frames = 0;
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists