| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 16 Oct 2012 13:21:59 -0400 From: James Kosin <jkosin@...comgrp.com> To: unlisted-recipients:; (no To-header on input) CC: <netdev@...r.kernel.org> Subject: Re: EG20T and Micrel KSZ9021 Gigabit Ethernet I have to remember to use plain text only.... On 10/16/2012 1:13 PM, James Kosin wrote: > Hmmm... interesting turn of events. > > The problem seems to be in 10 speed support. I hooked the Ethernet > PHY to a100TX port and don't get these errors. > > James > > On 10/5/2012 5:09 PM, Francois Romieu wrote: >> (please don't top post) >> >> James Kosin <jkosin@...comgrp.com> : >>> The driver is always reporting: >>> [...] pch_gbe: Transfer Carrier Sense Error >> You should send more information. Say dmesg, link stats (ip link), >> ethtool information, stats and offload settings. >> >> We have a small Micrel ksz9021 phy driver that the pch_gbe driver does >> not use and the latter pokes into some phy specific register (0x10) that >> the Micrel document does not include in its list of vendor registers... >> >> Does your motherboard vendor offer some linux driver ? >> >> /note to myself: pch_gbe should use standard mii.h registers instead >> of defining its own redundant set of registers. >> >> -- >> Ueimor >> > -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists