| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 1 Jan 2013 17:22:30 +0200
From: "Ariel Elior" <ariele@...adcom.com>
To: "David Miller" <davem@...emloft.net>
cc: netdev <netdev@...r.kernel.org>, eilong@...adcom.com,
"Ariel Elior" <ariele@...adcom.com>
Subject: [PATCH net-next v5 08/22] bnx2x: VF fastpath
When VF driver is transmitting it must supply the correct mac
address in the parsing BD. This is used for firmware validation
and enforcement and also for tx-switching.
Refactor interrupt ack flow to allow for different BAR addresses of
the hardware in the PF BAR vs the VF BAR.
Signed-off-by: Ariel Elior <ariele@...adcom.com>
Signed-off-by: Eilon Greenstein <eilong@...adcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 20 +++++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 68 +++++++++++-----------
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 13 +----
3 files changed, 50 insertions(+), 51 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 362451d..18baf75 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -3472,8 +3472,18 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
cpu_to_le16(vlan_tx_tag_get(skb));
tx_start_bd->bd_flags.as_bitfield |=
(X_ETH_OUTBAND_VLAN << ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
- } else
- tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod);
+ } else {
+ /* when transmitting in a vf, start bd must hold the ethertype
+ * for fw to enforce it
+ */
+ if (IS_VF(bp)) {
+ tx_start_bd->vlan_or_ethertype =
+ cpu_to_le16(ntohs(eth->h_proto));
+ } else {
+ /* used by FW for packet accounting */
+ tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod);
+ }
+ }
/* turn on parsing and get a BD */
bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
@@ -3489,9 +3499,9 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
hlen = bnx2x_set_pbd_csum_e2(bp, skb,
&pbd_e2_parsing_data,
xmit_type);
- if (IS_MF_SI(bp)) {
- /*
- * fill in the MAC addresses in the PBD - for local
+
+ if (IS_MF_SI(bp) || IS_VF(bp)) {
+ /* fill in the MAC addresses in the PBD - for local
* switching
*/
bnx2x_set_fw_mac_addr(&pbd_e2->src_mac_addr_hi,
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index 91e432d..6b0add2 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -499,6 +499,39 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc);
/* select_queue callback */
u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb);
+static inline void bnx2x_update_rx_prod(struct bnx2x *bp,
+ struct bnx2x_fastpath *fp,
+ u16 bd_prod, u16 rx_comp_prod,
+ u16 rx_sge_prod)
+{
+ struct ustorm_eth_rx_producers rx_prods = {0};
+ u32 i;
+
+ /* Update producers */
+ rx_prods.bd_prod = bd_prod;
+ rx_prods.cqe_prod = rx_comp_prod;
+ rx_prods.sge_prod = rx_sge_prod;
+
+ /* Make sure that the BD and SGE data is updated before updating the
+ * producers since FW might read the BD/SGE right after the producer
+ * is updated.
+ * This is only applicable for weak-ordered memory model archs such
+ * as IA-64. The following barrier is also mandatory since FW will
+ * assumes BDs must have buffers.
+ */
+ wmb();
+
+ for (i = 0; i < sizeof(rx_prods)/4; i++)
+ REG_WR(bp, fp->ustorm_rx_prods_offset + i*4,
+ ((u32 *)&rx_prods)[i]);
+
+ mmiowb(); /* keep prod updates ordered */
+
+ DP(NETIF_MSG_RX_STATUS,
+ "queue[%d]: wrote bd_prod %u cqe_prod %u sge_prod %u\n",
+ fp->index, bd_prod, rx_comp_prod, rx_sge_prod);
+}
+
/* reload helper */
int bnx2x_reload_if_running(struct net_device *dev);
@@ -507,9 +540,6 @@ int bnx2x_change_mac_addr(struct net_device *dev, void *p);
/* NAPI poll Rx part */
int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget);
-void bnx2x_update_rx_prod(struct bnx2x *bp, struct bnx2x_fastpath *fp,
- u16 bd_prod, u16 rx_comp_prod, u16 rx_sge_prod);
-
/* NAPI poll Tx part */
int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata);
@@ -612,38 +642,6 @@ static inline void bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
fp->fp_hc_idx = fp->sb_running_index[SM_RX_ID];
}
-static inline void bnx2x_update_rx_prod_gen(struct bnx2x *bp,
- struct bnx2x_fastpath *fp, u16 bd_prod,
- u16 rx_comp_prod, u16 rx_sge_prod, u32 start)
-{
- struct ustorm_eth_rx_producers rx_prods = {0};
- u32 i;
-
- /* Update producers */
- rx_prods.bd_prod = bd_prod;
- rx_prods.cqe_prod = rx_comp_prod;
- rx_prods.sge_prod = rx_sge_prod;
-
- /*
- * Make sure that the BD and SGE data is updated before updating the
- * producers since FW might read the BD/SGE right after the producer
- * is updated.
- * This is only applicable for weak-ordered memory model archs such
- * as IA-64. The following barrier is also mandatory since FW will
- * assumes BDs must have buffers.
- */
- wmb();
-
- for (i = 0; i < sizeof(rx_prods)/4; i++)
- REG_WR(bp, start + i*4, ((u32 *)&rx_prods)[i]);
-
- mmiowb(); /* keep prod updates ordered */
-
- DP(NETIF_MSG_RX_STATUS,
- "queue[%d]: wrote bd_prod %u cqe_prod %u sge_prod %u\n",
- fp->index, bd_prod, rx_comp_prod, rx_sge_prod);
-}
-
static inline void bnx2x_igu_ack_sb_gen(struct bnx2x *bp, u8 igu_sb_id,
u8 segment, u16 index, u8 op,
u8 update, u32 igu_addr)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index d278205..aafcaf6 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -1697,15 +1697,6 @@ void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe)
return;
}
-void bnx2x_update_rx_prod(struct bnx2x *bp, struct bnx2x_fastpath *fp,
- u16 bd_prod, u16 rx_comp_prod, u16 rx_sge_prod)
-{
- u32 start = BAR_USTRORM_INTMEM + fp->ustorm_rx_prods_offset;
-
- bnx2x_update_rx_prod_gen(bp, fp, bd_prod, rx_comp_prod, rx_sge_prod,
- start);
-}
-
irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
{
struct bnx2x *bp = netdev_priv(dev_instance);
@@ -4620,8 +4611,8 @@ static void bnx2x_attn_int(struct bnx2x *bp)
void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment,
u16 index, u8 op, u8 update)
{
- u32 igu_addr = BAR_IGU_INTMEM + (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8;
-
+ u32 igu_addr = bp->igu_base_addr;
+ igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8;
bnx2x_igu_ack_sb_gen(bp, igu_sb_id, segment, index, op, update,
igu_addr);
}
--
1.7.9.GIT
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists