| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 6 Mar 2013 13:53:20 +0530
From: Sathya Perla <sathya.perla@...lex.com>
To: <netdev@...r.kernel.org>
CC: Sathya Perla <sathya.perla@...lex.com>
Subject: [PATCH] be2net: use CSR-BAR SEMAPHORE reg for BE2/BE3
The SLIPORT_SEMAPHORE register shadowed in the
config-space may not reflect the correct POST stage after
an EEH reset in BE2/3; it may return FW_READY state even though
FW is not ready. This causes the driver to prematurely
poll the FW mailbox and fail.
For BE2/3 use the CSR-BAR/0xac instead.
Reported-by: Gavin Shan <shangw@...ux.vnet.ibm.com>
Signed-off-by: Sathya Perla <sathya.perla@...lex.com>
---
drivers/net/ethernet/emulex/benet/be.h | 1 +
drivers/net/ethernet/emulex/benet/be_cmds.c | 15 +++++++++------
drivers/net/ethernet/emulex/benet/be_hw.h | 4 ++--
drivers/net/ethernet/emulex/benet/be_main.c | 10 ++++++++++
4 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 28ceb84..29aff55 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -349,6 +349,7 @@ struct be_adapter {
struct pci_dev *pdev;
struct net_device *netdev;
+ u8 __iomem *csr; /* CSR BAR used only for BE2/3 */
u8 __iomem *db; /* Door Bell */
struct mutex mbox_lock; /* For serializing mbox cmds to BE card */
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 813407f..3c9b4f1 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -473,14 +473,17 @@ static int be_mbox_notify_wait(struct be_adapter *adapter)
return 0;
}
-static void be_POST_stage_get(struct be_adapter *adapter, u16 *stage)
+static u16 be_POST_stage_get(struct be_adapter *adapter)
{
u32 sem;
- u32 reg = skyhawk_chip(adapter) ? SLIPORT_SEMAPHORE_OFFSET_SH :
- SLIPORT_SEMAPHORE_OFFSET_BE;
- pci_read_config_dword(adapter->pdev, reg, &sem);
- *stage = sem & POST_STAGE_MASK;
+ if (BEx_chip(adapter))
+ sem = ioread32(adapter->csr + SLIPORT_SEMAPHORE_OFFSET_BEx);
+ else
+ pci_read_config_dword(adapter->pdev,
+ SLIPORT_SEMAPHORE_OFFSET_SH, &sem);
+
+ return sem & POST_STAGE_MASK;
}
int lancer_wait_ready(struct be_adapter *adapter)
@@ -574,7 +577,7 @@ int be_fw_wait_ready(struct be_adapter *adapter)
}
do {
- be_POST_stage_get(adapter, &stage);
+ stage = be_POST_stage_get(adapter);
if (stage == POST_STAGE_ARMFW_RDY)
return 0;
diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index 541d453..62dc220 100644
--- a/drivers/net/ethernet/emulex/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -32,8 +32,8 @@
#define MPU_EP_CONTROL 0
/********** MPU semphore: used for SH & BE *************/
-#define SLIPORT_SEMAPHORE_OFFSET_BE 0x7c
-#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94
+#define SLIPORT_SEMAPHORE_OFFSET_BEx 0xac /* CSR BAR offset */
+#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94 /* PCI-CFG offset */
#define POST_STAGE_MASK 0x0000FFFF
#define POST_ERR_MASK 0x1
#define POST_ERR_SHIFT 31
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 3860888..08e54f3 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3688,6 +3688,8 @@ static void be_netdev_init(struct net_device *netdev)
static void be_unmap_pci_bars(struct be_adapter *adapter)
{
+ if (adapter->csr)
+ pci_iounmap(adapter->pdev, adapter->csr);
if (adapter->db)
pci_iounmap(adapter->pdev, adapter->db);
}
@@ -3721,6 +3723,12 @@ static int be_map_pci_bars(struct be_adapter *adapter)
adapter->if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >>
SLI_INTF_IF_TYPE_SHIFT;
+ if (BEx_chip(adapter) && be_physfn(adapter)) {
+ adapter->csr = pci_iomap(adapter->pdev, 2, 0);
+ if (adapter->csr == NULL)
+ return -ENOMEM;
+ }
+
addr = pci_iomap(adapter->pdev, db_bar(adapter), 0);
if (addr == NULL)
goto pci_map_err;
@@ -4329,6 +4337,8 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev)
pci_restore_state(pdev);
/* Check if card is ok and fw is ready */
+ dev_info(&adapter->pdev->dev,
+ "Waiting for FW to be ready after EEH reset\n");
status = be_fw_wait_ready(adapter);
if (status)
return PCI_ERS_RESULT_DISCONNECT;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists