[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.10.0-rc4-00590-g130d3d6 (kbuild@cairo) (gcc version 4.7.2 (Debian 4.7.2-4) ) #32 Wed Jun 12 14:01:46 CST 2013 [ 0.000000] Command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c21-0611/net-next:master/.vmlinuz-130d3d68b52097c7ae081109f700b02776adcb9c-20130612140227-8-bens branch=net-next/master BOOT_IMAGE=/kernel/x86_64-randconfig-c21-0611/130d3d68b52097c7ae081109f700b02776adcb9c/vmlinuz-3.10.0-rc4-00590-g130d3d6 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000093bff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000093c00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff88000008d000] 8d000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fea000, 0x01feafff] PGTABLE [ 0.000000] BRK [0x01feb000, 0x01febfff] PGTABLE [ 0.000000] BRK [0x01fec000, 0x01fecfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0e600000-0x0e7fffff] [ 0.000000] [mem 0x0e600000-0x0e7fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0e5fffff] [ 0.000000] [mem 0x0c000000-0x0e5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0e800000-0x0fffdfff] [ 0.000000] [mem 0x0e800000-0x0fdfffff] page 2M [ 0.000000] [mem 0x0fe00000-0x0fffdfff] page 4k [ 0.000000] BRK [0x01fed000, 0x01fedfff] PGTABLE [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 128284(97%) [ 0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff] [ 0.000000] ACPI: RSDP 00000000000fd920 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000000fffe550 00038 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000000fffe590 01121 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 000000000fffff40 00040 [ 0.000000] ACPI: SSDT 000000000ffffe40 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 000000000ffffd50 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000000ffffd10 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 000000000ffff6c0 00644 (v01 BXPC BXSSDTPC 00000001 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000) [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x00001000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00092fff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65424 [ 0.000000] DMA32 zone: 1024 pages used for memmap [ 0.000000] DMA32 zone: 21 pages reserved [ 0.000000] DMA32 zone: 65424 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 2, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64379 [ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c21-0611/net-next:master/.vmlinuz-130d3d68b52097c7ae081109f700b02776adcb9c-20130612140227-8-bens branch=net-next/master BOOT_IMAGE=/kernel/x86_64-randconfig-c21-0611/130d3d68b52097c7ae081109f700b02776adcb9c/vmlinuz-3.10.0-rc4-00590-g130d3d6 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 208752k/262136k available (9154k kernel code, 440k absent, 52944k reserved, 4978k data, 776k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] console [ttyS0] enabled [ 0.000000] ------------------------ [ 0.000000] | Locking API testsuite: [ 0.000000] ---------------------------------------------------------------------------- [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] A-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] double unlock: ok | ok |failed| ok |failed|failed| [ 0.000000] initialize held:failed|failed|failed|failed|failed|failed| [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] recursive read-lock: | ok | |failed| [ 0.000000] recursive read-lock #2: | ok | |failed| [ 0.000000] mixed read-write-lock: |failed| |failed| [ 0.000000] mixed write-read-lock: |failed| |failed| [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] hard-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.000000] soft-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.000000] hard-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.000000] soft-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.000000] sirq-safe-A => hirqs-on/12:failed|failed| ok | [ 0.000000] sirq-safe-A => hirqs-on/21:failed|failed| ok | [ 0.000000] hard-safe-A + irqs-on/12:failed|failed| ok | [ 0.000000] soft-safe-A + irqs-on/12:failed|failed| ok | [ 0.000000] hard-safe-A + irqs-on/21:failed|failed| ok | [ 0.000000] soft-safe-A + irqs-on/21:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/123:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/123:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/132:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/132:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/213:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/213:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/231:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/231:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/312:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/312:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/321:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/321:failed|failed| ok | [ 0.000000] hard-irq read-recursion/123: ok | [ 0.000000] soft-irq read-recursion/123: ok | [ 0.000000] hard-irq read-recursion/132: ok | [ 0.000000] soft-irq read-recursion/132: ok | [ 0.000000] hard-irq read-recursion/213: ok | [ 0.000000] soft-irq read-recursion/213: ok | [ 0.000000] hard-irq read-recursion/231: ok | [ 0.000000] soft-irq read-recursion/231: ok | [ 0.000000] hard-irq read-recursion/312: ok | [ 0.000000] soft-irq read-recursion/312: ok | [ 0.000000] hard-irq read-recursion/321: ok | [ 0.000000] soft-irq read-recursion/321: ok | [ 0.000000] -------------------------------------------------------- [ 0.000000] 142 out of 218 testcases failed, as expected. | [ 0.000000] ---------------------------------------------------- [ 0.000000] ODEBUG: 8 of 8 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 2666.615 MHz processor [ 0.010001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5335.44 BogoMIPS (lpj=8888716) [ 0.013840] pid_max: default: 32768 minimum: 301 [ 0.014714] Mount-cache hash table entries: 256 [ 0.015732] Initializing cgroup subsys devices [ 0.016680] Initializing cgroup subsys perf_event [ 0.017621] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.017621] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.017621] tlb_flushall_shift: 6 [ 0.020003] CPU: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.021414] ACPI: Core revision 20130328 [ 0.022857] ACPI: All ACPI Tables successfully acquired [ 0.024174] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.027660] Getting VERSION: 50014 [ 0.028281] Getting VERSION: 50014 [ 0.028902] Getting ID: 0 [ 0.029383] Getting ID: ff000000 [ 0.029970] Getting LVT0: 8700 [ 0.030007] Getting LVT1: 8400 [ 0.030729] enabled ExtINT on CPU#0 [ 0.032396] ENABLING IO-APIC IRQs [ 0.033340] init IO_APIC IRQs [ 0.033875] apic 2 pin 0 not connected [ 0.034571] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.035975] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.036686] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.038080] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.040018] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.041416] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.042805] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.043351] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.044738] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.046684] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.048100] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.050018] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.051442] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.052861] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.053351] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.054769] apic 2 pin 16 not connected [ 0.056668] apic 2 pin 17 not connected [ 0.057366] apic 2 pin 18 not connected [ 0.058055] apic 2 pin 19 not connected [ 0.058750] apic 2 pin 20 not connected [ 0.059445] apic 2 pin 21 not connected [ 0.060002] apic 2 pin 22 not connected [ 0.060695] apic 2 pin 23 not connected [ 0.061535] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.094953] Using local APIC timer interrupts. [ 0.094953] calibrating APIC timer ... [ 0.099999] ... lapic delta = 6249773 [ 0.099999] ... PM-Timer delta = 357926 [ 0.099999] ... PM-Timer result ok [ 0.099999] ..... delta 6249773 [ 0.099999] ..... mult: 268425733 [ 0.099999] ..... calibration result: 3333212 [ 0.099999] ..... CPU clock speed is 2666.2380 MHz. [ 0.099999] ..... host bus clock speed is 1000.0212 MHz. [ 0.100268] devtmpfs: initialized [ 0.102305] xor: measuring software checksum speed [ 0.133338] prefetch64-sse: 10120.800 MB/sec [ 0.166669] generic_sse: 8144.400 MB/sec [ 0.167787] xor: using function: prefetch64-sse (10120.800 MB/sec) [ 0.169419] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.170161] regulator-dummy: no parameters [ 0.171325] NET: Registered protocol family 16 [ 0.173998] ACPI: bus type PCI registered [ 0.175157] PCI: Using configuration type 1 for base access [ 0.181153] bio: create slab at 0 [ 0.236688] raid6: sse2x1 3141 MB/s [ 0.293342] raid6: sse2x2 6660 MB/s [ 0.350010] raid6: sse2x4 7409 MB/s [ 0.350870] raid6: using algorithm sse2x4 (7409 MB/s) [ 0.352023] raid6: using intx1 recovery algorithm [ 0.353205] ACPI: Added _OSI(Module Device) [ 0.353338] ACPI: Added _OSI(Processor Device) [ 0.354355] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.355446] ACPI: Added _OSI(Processor Aggregator Device) [ 0.357382] ACPI: EC: Look up EC in DSDT [ 0.360528] ACPI: Interpreter enabled [ 0.361386] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.363336] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.365475] ACPI: (supports S0 S3 S5) [ 0.366315] ACPI: Using IOAPIC for interrupt routing [ 0.366682] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.372780] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.373352] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.374954] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.376670] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.378435] acpi PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored) [ 0.380003] PCI: root bus 00: using default resources [ 0.381175] PCI host bridge to bus 0000:00 [ 0.382116] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.383336] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.384746] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff] [ 0.386734] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.388616] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.390719] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.394679] pci 0000:00:01.1: reg 20: [io 0xc1e0-0xc1ef] [ 0.396891] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.398837] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.400016] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.401876] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.407191] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 0.410071] pci 0000:00:02.0: reg 14: [mem 0xfebe0000-0xfebe0fff] [ 0.416034] pci 0000:00:02.0: reg 30: [mem 0xfebc0000-0xfebcffff pref] [ 0.417181] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 [ 0.420358] pci 0000:00:03.0: reg 10: [io 0xc1c0-0xc1df] [ 0.422258] pci 0000:00:03.0: reg 14: [mem 0xfebe1000-0xfebe1fff] [ 0.427027] pci 0000:00:03.0: reg 30: [mem 0xfebd0000-0xfebdffff pref] [ 0.428822] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000 [ 0.430722] pci 0000:00:04.0: reg 10: [mem 0xfeb80000-0xfeb9ffff] [ 0.432767] pci 0000:00:04.0: reg 14: [io 0xc000-0xc03f] [ 0.437698] pci 0000:00:04.0: reg 30: [mem 0xfeba0000-0xfebbffff pref] [ 0.439365] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.440769] pci 0000:00:05.0: reg 10: [io 0xc040-0xc07f] [ 0.443336] pci 0000:00:05.0: reg 14: [mem 0xfebe2000-0xfebe2fff] [ 0.448389] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.450718] pci 0000:00:06.0: reg 10: [io 0xc080-0xc0bf] [ 0.452620] pci 0000:00:06.0: reg 14: [mem 0xfebe3000-0xfebe3fff] [ 0.457688] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.459804] pci 0000:00:07.0: reg 10: [io 0xc0c0-0xc0ff] [ 0.460685] pci 0000:00:07.0: reg 14: [mem 0xfebe4000-0xfebe4fff] [ 0.466980] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.469104] pci 0000:00:08.0: reg 10: [io 0xc100-0xc13f] [ 0.470691] pci 0000:00:08.0: reg 14: [mem 0xfebe5000-0xfebe5fff] [ 0.476082] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.477430] pci 0000:00:09.0: reg 10: [io 0xc140-0xc17f] [ 0.480003] pci 0000:00:09.0: reg 14: [mem 0xfebe6000-0xfebe6fff] [ 0.485047] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000 [ 0.487430] pci 0000:00:0a.0: reg 10: [io 0xc180-0xc1bf] [ 0.489329] pci 0000:00:0a.0: reg 14: [mem 0xfebe7000-0xfebe7fff] [ 0.494321] pci 0000:00:0b.0: [8086:25ab] type 00 class 0x088000 [ 0.496070] pci 0000:00:0b.0: reg 10: [mem 0xfebe8000-0xfebe800f] [ 0.500245] pci_bus 0000:00: on NUMA node 0 [ 0.501222] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.502997] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.503798] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.506806] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.508358] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.509907] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.510519] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0 [ 0.512378] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.513342] acpi root: \_SB_.PCI0 notify handler is installed [ 0.514655] Found 1 acpi root devices [ 0.517207] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.519025] vgaarb: loaded [ 0.519648] vgaarb: bridge control possible 0000:00:02.0 [ 0.520411] SCSI subsystem initialized [ 0.521281] ACPI: bus type ATA registered [ 0.522259] libata version 3.00 loaded. [ 0.523394] Linux video capture interface: v2.00 [ 0.524466] pps_core: LinuxPPS API ver. 1 registered [ 0.525590] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.526677] PTP clock support registered [ 0.527805] Advanced Linux Sound Architecture Driver Initialized. [ 0.530022] PCI: Using ACPI for IRQ routing [ 0.530979] PCI: pci_cache_line_size set to 64 bytes [ 0.533384] e820: reserve RAM buffer [mem 0x00093c00-0x0009ffff] [ 0.534740] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 0.536840] Switching to clocksource hpet [ 0.537843] FS-Cache: Loaded [ 0.538532] CacheFiles: Loaded [ 0.539273] pnp: PnP ACPI init [ 0.539979] ACPI: bus type PNP registered [ 0.539979] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.541827] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.543398] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.545207] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.546752] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.548588] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.550135] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.551922] pnp 00:03: [dma 2] [ 0.552640] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.554218] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.556046] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.557619] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.559439] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.561110] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.562738] pnp: PnP ACPI: found 7 devices [ 0.563731] ACPI: bus type PNP unregistered [ 0.564686] INFO_MDMA: LNW DMA Driver Version 1.1.0 [ 0.570776] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.572044] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff] [ 0.573554] NET: Registered protocol family 1 [ 0.574582] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.575929] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.577311] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.578736] pci 0000:00:02.0: Boot video device [ 0.579896] PCI: CLS 0 bytes, default 64 [ 0.580923] Trying to unpack rootfs image as initramfs... [ 1.240161] Freeing initrd memory: 23656k freed [ 1.265863] DMA-API: preallocated 65536 debug entries [ 1.267360] DMA-API: debugging enabled by kernel config [ 1.269278] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1 [ 1.270817] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.273129] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64. [ 1.275528] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64. [ 1.277997] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way. [ 1.280602] cryptomgr_test (19) used greatest stack depth: 7024 bytes left [ 1.282655] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 1.284308] sha256_ssse3: Neither AVX nor SSSE3 is available/usable. [ 1.285943] AVX or AES-NI instructions are not detected. [ 1.287377] AVX instructions are not detected. [ 1.288532] AVX instructions are not detected. [ 1.289685] AVX instructions are not detected. [ 1.290892] AVX instructions are not detected. [ 1.292049] AVX2 instructions are not detected. [ 1.293223] AVX2 or AES-NI instructions are not detected. [ 1.294671] AVX2 instructions are not detected. [ 1.295845] AVX2 instructions are not detected. [ 1.297506] Initializing RT-Tester: OK [ 1.300902] NTFS driver 2.1.30 [Flags: R/O DEBUG]. [ 1.302249] fuse init (API version 7.22) [ 1.303549] JFS: nTxBlock = 1815, nTxLock = 14525 [ 1.306123] NILFS version 2 loaded [ 1.307369] bio: create slab at 1 [ 1.308628] Running btrfs free space cache tests [ 1.309836] Running extent only tests [ 1.310884] Running bitmap only tests [ 1.311849] Running bitmap and extent tests [ 1.312960] Free space cache tests finished [ 1.314112] Btrfs loaded [ 1.315389] GFS2 installed [ 1.316128] msgmni has been set to 453 [ 1.318287] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.320258] io scheduler noop registered [ 1.321290] io scheduler cfq registered (default) [ 1.324477] list_sort_test: start testing list_sort() [ 1.325989] test_string_helpers: Running tests... [ 1.327423] xz_dec_test: module loaded [ 1.328413] xz_dec_test: Create a device node with 'mknod xz_dec_test c 249 0' and write .xz files to it. [ 1.331209] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.332674] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.334602] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.336501] ACPI: Power Button [PWRF] [ 1.338379] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 1.339870] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 1.342107] virtio-pci 0000:00:03.0: setting latency timer to 64 [ 1.344213] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 1.345708] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 1.347903] virtio-pci 0000:00:05.0: setting latency timer to 64 [ 1.350290] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 1.351818] virtio-pci 0000:00:06.0: setting latency timer to 64 [ 1.353970] virtio-pci 0000:00:07.0: setting latency timer to 64 [ 1.356164] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.357748] virtio-pci 0000:00:08.0: setting latency timer to 64 [ 1.359831] virtio-pci 0000:00:09.0: setting latency timer to 64 [ 1.361974] virtio-pci 0000:00:0a.0: setting latency timer to 64 [ 1.371114] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.430076] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.432027] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 1.433924] ac.o: No PCI boards found. [ 1.434907] ac.o: For an ISA board you must supply memory and irq parameters. [ 1.436844] ppdev: user-space parallel port driver [ 1.438113] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 1.439446] parport_pc 00:04: reported by Plug and Play ACPI [ 1.450450] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 1.534031] Floppy drive(s): fd0 is 1.44M [ 1.535975] brd: module loaded [ 1.537183] loop: module loaded [ 1.537876] Compaq SMART2 Driver (v 2.6.0) [ 1.538909] MM: desc_per_page = 128 [ 1.539668] mtip32xx Version 1.2.6os3 [ 1.540650] dummy-irq: no IRQ given. Use irq=N [ 1.541636] lkdtm: No crash points registered, enable through debugfs [ 1.543027] Phantom Linux Driver, version n0.9.8, init OK [ 1.544399] Driver for timberdale has been successfully registered. [ 1.545839] rdac: device handler registered [ 1.546880] emc: device handler registered [ 1.547808] alua: device handler registered [ 1.548698] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 1.552071] FDC 0 is a S82078B [ 1.553721] osst :I: Tape driver with OnStream support version 0.99.4 [ 1.553721] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 1.556545] SCSI Media Changer driver v0.25 [ 1.557665] ata_piix 0000:00:01.1: version 2.13 [ 1.558797] ata_piix 0000:00:01.1: setting latency timer to 64 [ 1.560440] scsi0 : ata_piix [ 1.561173] scsi1 : ata_piix [ 1.561826] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1e0 irq 14 [ 1.563296] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1e8 irq 15 [ 1.565813] HSI/SSI char device loaded [ 1.566959] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.569627] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.570808] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.571942] serio: PARKBD AT adapter on parport0 [ 1.573033] mousedev: PS/2 mouse device common for all mice [ 1.574775] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.576930] I2O subsystem v1.325 [ 1.577682] i2o: max drivers = 8 [ 1.578472] I2O Configuration OSM v1.323 [ 1.579320] I2O Bus Adapter OSM v1.317 [ 1.580196] I2O SCSI Peripheral OSM v1.316 [ 1.581240] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 1.593569] i2c-parport-light: adapter type unspecified [ 1.594778] saa7146: register extension 'hexium HV-PCI6 Orion' [ 1.596060] Zoran MJPEG board driver version 0.10.1 [ 1.597192] Linux video codec intermediate layer: v0.2 [ 1.598307] cx25821: driver version 0.0.106 loaded [ 1.599408] pps pps0: new PPS source ktimer [ 1.600431] pps pps0: ktimer PPS source registered [ 1.673450] w83793: Detection failed at check vendor id [ 1.693439] w83793: Detection failed at check vendor id [ 1.713439] w83793: Detection failed at check vendor id [ 1.717585] ata2.01: NODEV after polling detection [ 1.719019] ata2.00: ATAPI: QEMU DVD-ROM, 1.1.2, max UDMA/100 [ 1.721069] ata2.00: configured for MWDMA2 [ 1.722646] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.1. PQ: 0 ANSI: 5 [ 1.725495] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.726746] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.728145] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.729349] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 1.733444] w83793: Detection failed at check vendor id [ 1.746775] i2c i2c-0: w83795: Detection failed at addr 0x2c, check bank [ 1.760107] i2c i2c-0: w83795: Detection failed at addr 0x2d, check bank [ 1.773440] i2c i2c-0: w83795: Detection failed at addr 0x2e, check bank [ 1.786774] i2c i2c-0: w83795: Detection failed at addr 0x2f, check bank [ 1.800107] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.813439] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.826773] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.840108] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.853440] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.866774] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.880106] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.893441] i2c i2c-0: Detection of w83781d chip failed at step 3 [ 1.966779] i2c i2c-0: Detecting device at 0,0x2c with COMPANY: 0xff and VERSTEP: 0xff [ 1.968503] i2c i2c-0: Autodetecting device at 0,0x2c... [ 1.969623] i2c i2c-0: Autodetection failed [ 1.990108] i2c i2c-0: Detecting device at 0,0x2d with COMPANY: 0xff and VERSTEP: 0xff [ 1.991823] i2c i2c-0: Autodetecting device at 0,0x2d... [ 1.992950] i2c i2c-0: Autodetection failed [ 2.013441] i2c i2c-0: Detecting device at 0,0x2e with COMPANY: 0xff and VERSTEP: 0xff [ 2.015186] i2c i2c-0: Autodetecting device at 0,0x2e... [ 2.016315] i2c i2c-0: Autodetection failed [ 2.270081] tsc: Refined TSC clocksource calibration: 2666.660 MHz [ 2.271489] Switching to clocksource tsc [ 2.366740] i2c i2c-0: detect fail: address match, 0x2c [ 2.380069] i2c i2c-0: detect fail: address match, 0x2d [ 2.393402] i2c i2c-0: detect fail: address match, 0x2e [ 2.406734] i2c i2c-0: detect fail: address match, 0x2f [ 2.420071] (null): Wrong manufacturer ID. Got 255, expected 65 [ 2.433403] (null): Wrong manufacturer ID. Got 255, expected 65 [ 2.446735] (null): Wrong manufacturer ID. Got 255, expected 65 [ 2.578348] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 2.866908] f71882fg: Not a Fintek device [ 2.867842] f71882fg: Not a Fintek device [ 2.973404] (null): Unknown chip type, skipping [ 2.986734] (null): Unknown chip type, skipping [ 3.300080] i2c i2c-0: Unsupported chip (man_id=0xFF, chip_id=0xFF) [ 3.346749] i2c i2c-0: Unsupported chip (man_id=0xFF, chip_id=0xFF) [ 3.393412] i2c i2c-0: Unsupported chip (man_id=0xFF, chip_id=0xFF) [ 8.156769] i2c i2c-0: Unsupported chip at 0x18 (man_id=0xFF, chip_id=0xFF) [ 8.190102] i2c i2c-0: Unsupported chip at 0x19 (man_id=0xFF, chip_id=0xFF) [ 8.223420] i2c i2c-0: Unsupported chip at 0x1a (man_id=0xFF, chip_id=0xFF) [ 8.256734] i2c i2c-0: Unsupported chip at 0x29 (man_id=0xFF, chip_id=0xFF) [ 8.290067] i2c i2c-0: Unsupported chip at 0x2a (man_id=0xFF, chip_id=0xFF) [ 8.323400] i2c i2c-0: Unsupported chip at 0x2b (man_id=0xFF, chip_id=0xFF) [ 8.356732] i2c i2c-0: Unsupported chip at 0x48 (man_id=0xFF, chip_id=0xFF) [ 8.390067] i2c i2c-0: Unsupported chip at 0x49 (man_id=0xFF, chip_id=0xFF) [ 8.423411] i2c i2c-0: Unsupported chip at 0x4a (man_id=0xFF, chip_id=0xFF) [ 8.456732] i2c i2c-0: Unsupported chip at 0x4b (man_id=0xFF, chip_id=0xFF) [ 8.490066] i2c i2c-0: Unsupported chip at 0x4c (man_id=0xFF, chip_id=0xFF) [ 8.523400] i2c i2c-0: Unsupported chip at 0x4d (man_id=0xFF, chip_id=0xFF) [ 8.556733] i2c i2c-0: Unsupported chip at 0x4e (man_id=0xFF, chip_id=0xFF) [ 8.590066] i2c i2c-0: Unsupported chip at 0x4f (man_id=0xFF, chip_id=0xFF) [ 8.603399] i2c i2c-0: detect failed, bad manufacturer id 0xff! [ 8.616732] i2c i2c-0: detect failed, bad manufacturer id 0xff! [ 8.630066] i2c i2c-0: detect failed, bad manufacturer id 0xff! [ 8.736737] i2c i2c-0: MAX1619 detection failed at 0x18 [ 8.763399] i2c i2c-0: MAX1619 detection failed at 0x19 [ 8.790065] i2c i2c-0: MAX1619 detection failed at 0x1a [ 8.816733] i2c i2c-0: MAX1619 detection failed at 0x29 [ 8.843398] i2c i2c-0: MAX1619 detection failed at 0x2a [ 8.870066] i2c i2c-0: MAX1619 detection failed at 0x2b [ 8.896732] i2c i2c-0: MAX1619 detection failed at 0x4c [ 8.923405] i2c i2c-0: MAX1619 detection failed at 0x4d [ 8.950067] i2c i2c-0: MAX1619 detection failed at 0x4e [ 9.236879] pc87360: PC8736x not detected, module not inserted [ 9.238478] sch56xx_common: Unsupported device id: 0xff [ 9.239855] sch56xx_common: Unsupported device id: 0xff [ 9.246732] thmc50: Probing for THMC50 at 0x2C on bus 0 [ 9.273390] thmc50: Probing for THMC50 at 0x2D on bus 0 [ 9.300056] thmc50: Probing for THMC50 at 0x2E on bus 0 [ 9.360276] advantechwdt: WDT driver for Advantech single board computer initialising [ 9.362407] advantechwdt: initialized. timeout=60 sec (nowayout=1) [ 9.364025] alim7101_wdt: Steve Hill [ 9.365418] alim7101_wdt: ALi M7101 PMU not present - WDT not set [ 9.367085] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 9.368587] it87_wdt: no device [ 9.369424] sc1200wdt: build 20020303 [ 9.370410] sc1200wdt: io parameter must be specified [ 9.371722] pc87413_wdt: Version 1.1 at io 0x2E [ 9.372901] pc87413_wdt: cannot register miscdev on minor=130 (err=-16) [ 9.374628] sbc60xxwdt: I/O address 0x0443 already in use [ 9.376029] sbc8360: failed to register misc device [ 9.377324] cpu5wdt: misc_register failed [ 9.378453] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising... [ 9.381558] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 9.383171] w83627hf_wdt: WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising [ 9.385703] w83627hf_wdt: Watchdog already running. Resetting timeout to 60 sec [ 9.387682] w83627hf_wdt: cannot register miscdev on minor=130 (err=-16) [ 9.389400] w83697hf_wdt: WDT driver for W83697HF/HG initializing [ 9.391036] w83697hf_wdt: watchdog not found at address 0x2e [ 9.392494] w83697hf_wdt: No W83697HF/HG could be found [ 9.393860] w83697ug_wdt: WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising [ 9.396148] w83697ug_wdt: No W83697UG/UF could be found [ 9.397647] w83877f_wdt: I/O address 0x0443 already in use [ 9.399079] w83977f_wdt: driver v1.00 [ 9.400055] w83977f_wdt: cannot register miscdev on minor=130 (err=-16) [ 9.401776] machzwd: MachZ ZF-Logic Watchdog driver initializing [ 9.403348] machzwd: no ZF-Logic found [ 9.404327] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16) [ 9.406048] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16). [ 9.408148] watchdog: Software Watchdog: a legacy watchdog module is probably present. [ 9.410231] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1) [ 9.413062] md: linear personality registered for level -1 [ 9.414496] md: raid0 personality registered for level 0 [ 9.415861] md: raid1 personality registered for level 1 [ 9.417252] md: raid10 personality registered for level 10 [ 9.418679] md: multipath personality registered for level -4 [ 9.420187] md: faulty personality registered for level -5 [ 9.421777] cpuidle: using governor ladder [ 9.422863] cpuidle: using governor menu [ 9.423931] sdhci: Secure Digital Host Controller Interface driver [ 9.425523] sdhci: Copyright(c) Pierre Ossman [ 9.426656] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 9.428200] wbsd: Copyright(c) Pierre Ossman [ 9.429345] sdhci-pltfm: SDHCI platform and OF driver helper [ 12.800096] (null): enodev DEV ADDR = 0xFF [ 12.801190] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 12.802797] cs5535-clockevt: Could not allocate MFGPT timer [ 12.804066] parport0: no more devices allowed [ 12.805004] panel: panel_attach: port->number=0 parport=0, parport_register_device() failed [ 12.806778] panel: driver version 0.9.5 not yet registered [ 12.807977] vme_pio2: No cards, skipping registration [ 12.809385] Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98 [ 12.811020] aedsp16: I/O, IRQ and DMA are mandatory [ 12.812057] pss: mss_io, mss_dma, mss_irq and pss_io must be set. [ 12.813334] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 [ 12.814942] ad1848: No ISAPnP cards found, trying standard ones... [ 12.816246] MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996 [ 12.817791] I/O, IRQ, DMA and type are mandatory [ 12.818777] Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996 [ 12.820362] I/O, IRQ, DMA and type are mandatory [ 12.821336] sb: Init: Starting Probe... [ 12.822189] sb: Init: Done [ 12.822797] YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 [ 12.824576] MIDI Loopback device driver [ 12.825615] can't register device seq [ 12.827642] no UART detected at 0x1 [ 12.828513] MTVAP port 0x378 is busy [ 12.829291] snd_mtpav: probe of snd_mtpav failed with error -16 [ 12.830606] parport0: no more devices allowed [ 12.831542] snd_mts64: probe of snd_mts64.0 failed with error -5 [ 12.833060] ASIHPI driver 4.10.01 [ 12.834565] [ 12.834565] printing PIC contents [ 12.835603] ... PIC IMR: ffff [ 12.836267] ... PIC IRR: 9053 [ 12.836954] ... PIC ISR: 0000 [ 12.837610] ... PIC ELCR: 0c00 [ 12.838273] printing local APIC contents on CPU#0/0: [ 12.839319] ... APIC ID: 00000000 (0) [ 12.840192] ... APIC VERSION: 00050014 [ 12.840275] ... APIC TASKPRI: 00000000 (00) [ 12.840275] ... APIC PROCPRI: 00000000 [ 12.840275] ... APIC LDR: 01000000 [ 12.840275] ... APIC DFR: ffffffff [ 12.840275] ... APIC SPIV: 000001ff [ 12.840275] ... APIC ISR field: [ 12.840275] 0000000000000000000000000000000000000000000000000000000000000000 [ 12.840275] ... APIC TMR field: [ 12.840275] 0000000000000000000000000000000000000000000000000000000000000000 [ 12.840275] ... APIC IRR field: [ 12.840275] 0000000000000000000000000000000000000000000000000000000000008000 [ 12.840275] ... APIC ESR: 00000000 [ 12.840275] ... APIC ICR: 00000831 [ 12.840275] ... APIC ICR2: 01000000 [ 12.840275] ... APIC LVTT: 000000ef [ 12.840275] ... APIC LVTPC: 00010000 [ 12.840275] ... APIC LVT0: 00010700 [ 12.840275] ... APIC LVT1: 00000400 [ 12.840275] ... APIC LVTERR: 000000fe [ 12.840275] ... APIC TMICT: 0002e99f [ 12.840275] ... APIC TMCCT: 00000000 [ 12.840275] ... APIC TDCR: 00000003 [ 12.840275] [ 12.863840] number of MP IRQ sources: 15. [ 12.864760] number of IO-APIC #2 registers: 24. [ 12.865724] testing the IO APIC....................... [ 12.866853] IO APIC #2...... [ 12.867477] .... register #00: 00000000 [ 12.868295] ....... : physical APIC id: 00 [ 12.869224] ....... : Delivery Type: 0 [ 12.870109] ....... : LTS : 0 [ 12.870965] .... register #01: 00170011 [ 12.871769] ....... : max redirection entries: 17 [ 12.872874] ....... : PRQ implemented: 0 [ 12.873844] ....... : IO APIC version: 11 [ 12.874832] .... register #02: 00000000 [ 12.875707] ....... : arbitration: 00 [ 12.876624] .... IRQ redirection table: [ 12.877553] 1 0 0 0 0 0 0 00 [ 12.878540] 0 0 0 0 0 1 1 31 [ 12.879514] 0 0 0 0 0 1 1 30 [ 12.880532] 0 0 0 0 0 1 1 33 [ 12.881580] 1 0 0 0 0 1 1 34 [ 12.882644] 1 1 0 0 0 1 1 35 [ 12.883756] 0 0 0 0 0 1 1 36 [ 12.884910] 0 0 0 0 0 1 1 37 [ 12.886124] 0 0 0 0 0 1 1 38 [ 12.887151] 0 1 0 0 0 1 1 39 [ 12.888119] 1 1 0 0 0 1 1 3A [ 12.889088] 1 1 0 0 0 1 1 3B [ 12.890077] 0 0 0 0 0 1 1 3C [ 12.891043] 0 0 0 0 0 1 1 3D [ 12.892005] 0 0 0 0 0 1 1 3E [ 12.892964] 0 0 0 0 0 1 1 3F [ 12.893943] 1 0 0 0 0 0 0 00 [ 12.894909] 1 0 0 0 0 0 0 00 [ 12.895931] 1 0 0 0 0 0 0 00 [ 12.896915] 1 0 0 0 0 0 0 00 [ 12.897890] 1 0 0 0 0 0 0 00 [ 12.898849] 1 0 0 0 0 0 0 00 [ 12.899813] 1 0 0 0 0 0 0 00 [ 12.900789] 1 0 0 0 0 0 0 00 [ 12.901741] IRQ to pin mappings: [ 12.902434] IRQ0 -> 0:2 [ 12.903029] IRQ1 -> 0:1 [ 12.903632] IRQ3 -> 0:3 [ 12.904222] IRQ4 -> 0:4 [ 12.904808] IRQ5 -> 0:5 [ 12.905399] IRQ6 -> 0:6 [ 12.905994] IRQ7 -> 0:7 [ 12.906580] IRQ8 -> 0:8 [ 12.907192] IRQ9 -> 0:9 [ 12.907781] IRQ10 -> 0:10 [ 12.908408] IRQ11 -> 0:11 [ 12.909038] IRQ12 -> 0:12 [ 12.909659] IRQ13 -> 0:13 [ 12.910304] IRQ14 -> 0:14 [ 12.910926] IRQ15 -> 0:15 [ 12.911552] .................................... done. [ 12.913494] dmaengine: __dma_request_channel: fail ((null)) [ 12.914759] hd: no drives specified - use hd=cyl,head,sectors on kernel command line [ 12.916479] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 12.917755] EDD information not available. [ 12.918617] ALSA device list: [ 12.919250] #0: Dummy 1 [ 12.919807] #1: Loopback 1 [ 12.920440] #2: Virtual MIDI Card 1 [ 12.922524] Freeing unused kernel memory: 776k freed [ 12.942549] hostname (104) used greatest stack depth: 5792 bytes left /bin/sh: /proc/self/fd/9: No such file or directory /bin/sh: /proc/self/fd/9: No such file or directory /bin/sh: /proc/self/fd/9: No such file or directory [ 20.859432] warning: process `trinity-child0' used the deprecated sysctl system call with [ 23.885633] trinity-child0 (125) used greatest stack depth: 5488 bytes left [ 31.276698] CPA self-test: [ 31.277284] 4k 1534 large 125 gb 0 x 1[ffff88000008e000-ffff88000008e000] miss 0 [ 31.286544] 4k 63998 large 3 gb 0 x 1[ffff88000008e000-ffff88000008e000] miss 0 [ 31.299047] 4k 63998 large 3 gb 0 x 1[ffff88000008e000-ffff88000008e000] miss 0 [ 31.314928] ok. plymouth-upstart-bridge: ply-event-loop.c:497: ply_event_loop_new: Assertion `loop->epoll_fd >= 0' failed. /etc/lsb-base-logging.sh: line 5: 164 Aborted plymouth --ping > /dev/null 2>&1 * Asking all remaining processes to terminate... killall5[167]: mount returned non-zero exit status killall5[167]: /proc not mounted, failed to mount. /etc/lsb-base-logging.sh: line 5: 169 Aborted plymouth --ping > /dev/null 2>&1 mount: proc has wrong device number or fs type proc not supported killall5[175]: mount returned non-zero exit status killall5[175]: /proc not mounted, failed to mount. /etc/lsb-base-logging.sh: line 5: 185 Aborted plymouth --ping > /dev/null 2>&1 * All processes ended within 1 seconds.... /etc/rc6.d/S40umountfs: line 20: /proc/mounts: No such file or directory cat: /proc/1/maps: No such file or directory cat: /proc/1/maps: No such file or directory [ 75.052517] BUG: unable to handle kernel NULL pointer dereference at (null) [ 75.053342] IP: [< (null)>] (null) [ 75.053342] PGD f015067 PUD f000067 PMD 0 [ 75.053342] Oops: 0010 [#1] [ 75.053342] CPU: 0 PID: 206 Comm: trinity-child0 Not tainted 3.10.0-rc4-00590-g130d3d6 #32 [ 75.053342] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 75.053342] task: ffff88000f0a1840 ti: ffff88000f04c000 task.ti: ffff88000f04c000 [ 75.053342] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [ 75.053342] RSP: 0018:ffff88000f04dc50 EFLAGS: 00010282 [ 75.053342] RAX: ffff88000f1d9438 RBX: ffff88000f1d9400 RCX: 0000000022b5ec40 [ 75.053342] RDX: 0000000000000000 RSI: ffff88000f1d9400 RDI: ffffffff81dab900 [ 75.053342] RBP: ffff88000f04dc78 R08: 0000000000000000 R09: 0000000000000000 [ 75.053342] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800000210d0 [ 75.053342] R13: ffffffff81dab900 R14: 0000000000000000 R15: 0000000000000000 [ 75.053342] FS: 00007fc54dccf700(0000) GS:ffffffff81c9b000(0000) knlGS:0000000000000000 [ 75.053342] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 75.053342] CR2: 0000000000000000 CR3: 0000000006eb0000 CR4: 00000000000006b0 [ 75.053342] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 75.053342] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 75.053342] Stack: [ 75.053342] ffffffff818d304f 0000000000000000 ffff88000f1d9400 ffff88000f007600 [ 75.053342] ffff88000f007600 ffff88000f04dcc8 ffffffff818d48ba 0000000000001000 [ 75.053342] 0000000000f54220 ffff88000f04dfd8 7fffffffffffffff ffff88000f04dd70 [ 75.053342] Call Trace: [ 75.053342] [] ? netlink_lookup+0xaf/0xf0 [ 75.053342] [] netlink_unicast+0xba/0x1d0 [ 75.053342] [] netlink_sendmsg+0x32a/0x3e0 [ 75.053342] [] sock_aio_write+0xfb/0x130 [ 75.053342] [] ? kmem_cache_free+0x32/0x180 [ 75.053342] [] do_sync_write+0x7a/0xb0 [ 75.053342] [] vfs_write+0x16d/0x1d0 [ 75.053342] [] SyS_write+0x4d/0xa0 [ 75.053342] [] system_call_fastpath+0x16/0x1b [ 75.053342] Code: Bad RIP value. [ 75.053342] RIP [< (null)>] (null) [ 75.053342] RSP [ 75.053342] CR2: 0000000000000000 [ 75.099392] ---[ end trace fe29140019c40c80 ]--- [ 75.100379] BUG: sleeping function called from invalid context at /c/kernel-tests/src/tip/kernel/rwsem.c:20 [ 75.102398] in_atomic(): 1, irqs_disabled(): 0, pid: 206, name: trinity-child0 [ 75.103920] CPU: 0 PID: 206 Comm: trinity-child0 Tainted: G D 3.10.0-rc4-00590-g130d3d6 #32 [ 75.105833] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 75.107053] 0000000000000009 ffff88000f04d888 ffffffff818e8da7 ffff88000f04d898 [ 75.108718] ffffffff810a7c0c ffff88000f04d8b8 ffffffff818eca4f 0000000000000092 [ 75.110410] ffff88000f0a1840 ffff88000f04d8e8 ffffffff8109046f ffff88000f04d948 [ 75.112076] Call Trace: [ 75.112606] [] dump_stack+0x19/0x1b [ 75.113708] [] __might_sleep+0xcc/0xf0 [ 75.114853] [] down_read+0x1f/0x40 [ 75.115914] [] exit_signals+0x1f/0x120 [ 75.117048] [] do_exit+0xa4/0x990 [ 75.118096] [] ? printk+0x48/0x4a [ 75.119138] [] oops_end+0x97/0xe0 [ 75.120198] [] no_context+0x25c/0x288 [ 75.121308] [] __bad_area_nosemaphore+0x1c2/0x1e1 [ 75.122630] [] bad_area_nosemaphore+0xe/0x10 [ 75.123888] [] __do_page_fault+0x2b2/0x4d0 [ 75.125090] [] ? __alloc_pages_nodemask+0x13e/0x8b0 [ 75.126445] [] ? __rmqueue+0x78/0x340 [ 75.127571] [] ? mutex_remove_waiter+0x51/0x140 [ 75.128856] [] ? __mutex_lock_slowpath+0x1ba/0x2b0 [ 75.130226] [] ? mutex_remove_waiter+0x51/0x140 [ 75.131518] [] do_page_fault+0x9/0x10 [ 75.132627] [] page_fault+0x1f/0x30 [ 75.133719] [] ? netlink_lookup+0xaf/0xf0 [ 75.134905] [] netlink_unicast+0xba/0x1d0 [ 75.136080] [] netlink_sendmsg+0x32a/0x3e0 [ 75.137274] [] sock_aio_write+0xfb/0x130 [ 75.138440] [] ? kmem_cache_free+0x32/0x180 [ 75.139655] [] do_sync_write+0x7a/0xb0 [ 75.140798] [] vfs_write+0x16d/0x1d0 [ 75.141889] [] SyS_write+0x4d/0xa0 [ 75.142948] [] system_call_fastpath+0x16/0x1b [ 75.144223] note: trinity-child0[206] exited with preempt_count 1 [ 75.146128] trinity-child0 (206) used greatest stack depth: 4352 bytes left cat: /proc/1/maps: No such file or directory cat: /proc/1/maps: No such file or directory cat: /proc/1/maps: No such file or directory cat: /proc/1/maps: No such file or directory umount: /var/run: not mounted umount: /var/lock: not mounted umount: /dev/shm: not mounted mount: / is busy * Will now restart [ 78.457366] Restarting system. [ 78.458190] reboot: machine restart Elapsed time: 100