| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 4 Sep 2013 06:08:50 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Akeem G Abodunrin <akeem.g.abodunrin@...el.com>,
netdev@...r.kernel.org, gospo@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 3/9] igb: New PHY_ID for i354 device
From: Akeem G Abodunrin <akeem.g.abodunrin@...el.com>
This patch changes PHY_ID for i354 device, now using M88E1543
instead of M88E1545.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/igb/e1000_82575.c | 18 +++++++++---------
drivers/net/ethernet/intel/igb/e1000_defines.h | 8 ++++----
drivers/net/ethernet/intel/igb/e1000_phy.c | 2 +-
3 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index d398fad..b0b33a1 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -176,7 +176,7 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
/* Verify phy id and set remaining function pointers */
switch (phy->id) {
- case M88E1545_E_PHY_ID:
+ case M88E1543_E_PHY_ID:
case I347AT4_E_PHY_ID:
case M88E1112_E_PHY_ID:
case M88E1111_I_PHY_ID:
@@ -1448,7 +1448,7 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
switch (hw->phy.id) {
case I347AT4_E_PHY_ID:
case M88E1112_E_PHY_ID:
- case M88E1545_E_PHY_ID:
+ case M88E1543_E_PHY_ID:
case I210_I_PHY_ID:
ret_val = igb_copper_link_setup_m88_gen2(hw);
break;
@@ -2477,28 +2477,28 @@ s32 igb_set_eee_i354(struct e1000_hw *hw)
u16 phy_data;
if ((hw->phy.media_type != e1000_media_type_copper) ||
- (phy->id != M88E1545_E_PHY_ID))
+ (phy->id != M88E1543_E_PHY_ID))
goto out;
if (!hw->dev_spec._82575.eee_disable) {
/* Switch to PHY page 18. */
- ret_val = phy->ops.write_reg(hw, E1000_M88E1545_PAGE_ADDR, 18);
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 18);
if (ret_val)
goto out;
- ret_val = phy->ops.read_reg(hw, E1000_M88E1545_EEE_CTRL_1,
+ ret_val = phy->ops.read_reg(hw, E1000_M88E1543_EEE_CTRL_1,
&phy_data);
if (ret_val)
goto out;
- phy_data |= E1000_M88E1545_EEE_CTRL_1_MS;
- ret_val = phy->ops.write_reg(hw, E1000_M88E1545_EEE_CTRL_1,
+ phy_data |= E1000_M88E1543_EEE_CTRL_1_MS;
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_EEE_CTRL_1,
phy_data);
if (ret_val)
goto out;
/* Return the PHY to page 0. */
- ret_val = phy->ops.write_reg(hw, E1000_M88E1545_PAGE_ADDR, 0);
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0);
if (ret_val)
goto out;
@@ -2549,7 +2549,7 @@ s32 igb_get_eee_status_i354(struct e1000_hw *hw, bool *status)
/* Check if EEE is supported on this device. */
if ((hw->phy.media_type != e1000_media_type_copper) ||
- (phy->id != M88E1545_E_PHY_ID))
+ (phy->id != M88E1543_E_PHY_ID))
goto out;
ret_val = igb_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354,
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 60559af..978eca3 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -787,7 +787,7 @@
#define I350_I_PHY_ID 0x015403B0
#define M88_VENDOR 0x0141
#define I210_I_PHY_ID 0x01410C00
-#define M88E1545_E_PHY_ID 0x01410EA0
+#define M88E1543_E_PHY_ID 0x01410EA0
/* M88E1000 Specific Registers */
#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
@@ -909,9 +909,9 @@
#define E1000_EEE_LP_ADV_DEV_I210 7 /* EEE LP Adv Device */
#define E1000_EEE_LP_ADV_ADDR_I210 61 /* EEE LP Adv Register */
#define E1000_MMDAC_FUNC_DATA 0x4000 /* Data, no post increment */
-#define E1000_M88E1545_PAGE_ADDR 0x16 /* Page Offset Register */
-#define E1000_M88E1545_EEE_CTRL_1 0x0
-#define E1000_M88E1545_EEE_CTRL_1_MS 0x0001 /* EEE Master/Slave */
+#define E1000_M88E1543_PAGE_ADDR 0x16 /* Page Offset Register */
+#define E1000_M88E1543_EEE_CTRL_1 0x0
+#define E1000_M88E1543_EEE_CTRL_1_MS 0x0001 /* EEE Master/Slave */
#define E1000_EEE_ADV_DEV_I354 7
#define E1000_EEE_ADV_ADDR_I354 60
#define E1000_EEE_ADV_100_SUPPORTED (1 << 1) /* 100BaseTx EEE Supported */
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index 6046194..5adccbc 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -1806,7 +1806,7 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
phy->cable_length = phy_data / (is_cm ? 100 : 1);
break;
- case M88E1545_E_PHY_ID:
+ case M88E1543_E_PHY_ID:
case I347AT4_E_PHY_ID:
/* Remember the original page select and set it to 7 */
ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists