| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 18 Sep 2013 11:12:10 +0100
From: Kevin Curtis <Kevin.Curtis@...site.com>
To: "netdev@...r.kernel.org" <netdev@...r.kernel.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"kernel-janitors@...r.kernel.org" <kernel-janitors@...r.kernel.org>,
Dermot Smith <dermot.smith@...site.com>
Subject: [PATCH 004/007] WAN Drivers: Update farsync driver and introduce
fsflex driver
Farsite Communications FarSync driver update
Patch 4 of 7
Note that this patch must be applied with patch 5 (farsync_driver_patch)
Update the existing farsync.h file for the new features of the farsync and
flex drivers.
Signed-off-by: Kevin Curtis <kevin.curtis@...site.com>
---
diff -uprN -X linux-3.10.1/Documentation/dontdiff linux-3.10.1/drivers/net/wan/farsync.h linux-3.10.1_new/drivers/net/wan/farsync.h
--- linux-3.10.1/drivers/net/wan/farsync.h 2013-07-13 19:42:41.000000000 +0100
+++ linux-3.10.1_new/drivers/net/wan/farsync.h 2013-09-16 16:30:06.483104880 +0100
@@ -1,17 +1,15 @@
/*
- * FarSync X21 driver for Linux
+ * FarSync driver for Linux
*
- * Actually sync driver for X.21, V.35 and V.24 on FarSync T-series cards
- *
- * Copyright (C) 2001 FarSite Communications Ltd.
- * www.farsite.co.uk
+ * Copyright (C) 2001-2013 FarSite Communications Ltd.
+ * www.farsite.com
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * Author: R.J.Dunlop <bob.dunlop@...site.co.uk>
+ * Author: R.J.Dunlop <bob.dunlop@...site.com>
*
* For the most part this file only contains structures and information
* that is visible to applications outside the driver. Shared memory
@@ -21,26 +19,9 @@
* this file may not be changed arbitrarily.
*/
-/* What's in a name
- *
- * The project name for this driver is Oscar. The driver is intended to be
- * used with the FarSite T-Series cards (T2P & T4P) running in the high
- * speed frame shifter mode. This is sometimes referred to as X.21 mode
- * which is a complete misnomer as the card continues to support V.24 and
- * V.35 as well as X.21.
- *
- * A short common prefix is useful for routines within the driver to avoid
- * conflict with other similar drivers and I chosen to use "fst_" for this
- * purpose (FarSite T-series).
- *
- * Finally the device driver needs a short network interface name. Since
- * "hdlc" is already in use I've chosen the even less informative "sync"
- * for the present.
- */
-#define FST_NAME "fst" /* In debug/info etc */
-#define FST_NDEV_NAME "sync" /* For net interface */
-#define FST_DEV_NAME "farsync" /* For misc interfaces */
-
+#define FST_NAME "fst" /* In debug/info etc */
+#define FST_NDEV_NAME "sync" /* For net interface */
+#define FST_DEV_NAME "farsync" /* For misc interfaces */
/* User version number
*
@@ -50,34 +31,119 @@
* have individual versions (or IDs) that move much faster than the
* the release version as individual updates are tracked.
*/
-#define FST_USER_VERSION "1.04"
+#define FST_USER_VERSION "2.1.7"
+#define FST_PATCH_LEVEL "00"
+#ifdef __x86_64__
+#define FST_PLATFORM "64bit"
+#else
+#define FST_PLATFORM "32bit"
+#endif
+#define FST_ADDITIONAL FST_BUILD_NO
+
+#define FST_INCLUDES_CHAR
+
+struct fst_device_stats {
+ unsigned long rx_packets; /* total packets received */
+ unsigned long tx_packets; /* total packets transmitted */
+ unsigned long rx_bytes; /* total bytes received */
+ unsigned long tx_bytes; /* total bytes transmitted */
+ unsigned long rx_errors; /* bad packets received */
+ unsigned long tx_errors; /* packet transmit problems */
+ unsigned long rx_dropped; /* no space in linux buffers */
+ unsigned long tx_dropped; /* no space available in linux */
+ unsigned long multicast; /* multicast packets received */
+ unsigned long collisions;
+
+ /* detailed rx_errors: */
+ unsigned long rx_length_errors;
+ unsigned long rx_over_errors; /* receiver ring buff overflow */
+ unsigned long rx_crc_errors; /* recved pkt with crc error */
+ unsigned long rx_frame_errors; /* recv'd frame alignment error */
+ unsigned long rx_fifo_errors; /* recv'r fifo overrun */
+ unsigned long rx_missed_errors; /* receiver missed packet */
+
+ /* detailed tx_errors */
+ unsigned long tx_aborted_errors;
+ unsigned long tx_carrier_errors;
+ unsigned long tx_fifo_errors;
+ unsigned long tx_heartbeat_errors;
+ unsigned long tx_underrun_errors;
+
+ /* for cslip etc */
+ unsigned long rx_compressed;
+ unsigned long tx_compressed;
+};
+#define COM_STOP_BITS_1 0
+#define COM_STOP_BITS_1_5 1
+#define COM_STOP_BITS_2 2
+
+#define COM_NO_PARITY 0
+#define COM_ODD_PARITY 1
+#define COM_EVEN_PARITY 2
+#define COM_FORCE_PARITY_1 3
+#define COM_FORCE_PARITY_0 4
+
+#define COM_FLOW_CONTROL_NONE 1
+#define COM_FLOW_CONTROL_RTSCTS 2
+#define COM_FLOW_CONTROL_XONXOFF 3
+
+struct fstioc_async_conf {
+ unsigned char flow_control;
+ unsigned char stop_bits;
+ unsigned char parity;
+ unsigned char word_length;
+ unsigned char xon_char;
+ unsigned char xoff_char;
+};
/* Ioctl call command values
+ *
+ * The first three private ioctls are used by the sync-PPP module,
+ * allowing a little room for expansion we start our numbering at 10.
*/
-#define FSTWRITE (SIOCDEVPRIVATE+10)
-#define FSTCPURESET (SIOCDEVPRIVATE+11)
-#define FSTCPURELEASE (SIOCDEVPRIVATE+12)
-#define FSTGETCONF (SIOCDEVPRIVATE+13)
-#define FSTSETCONF (SIOCDEVPRIVATE+14)
-
+#define FSTWRITE (SIOCDEVPRIVATE+4)
+#define FSTCPURESET (SIOCDEVPRIVATE+5)
+#define FSTCPURELEASE (SIOCDEVPRIVATE+6)
+#define FSTGETCONF (SIOCDEVPRIVATE+7)
+#define FSTSETCONF (SIOCDEVPRIVATE+8)
+#define FSTSNOTIFY (SIOCDEVPRIVATE+9)
+#define FSTGSTATE (SIOCDEVPRIVATE+10)
+#define FSTSYSREQ (SIOCDEVPRIVATE+11)
+#define FSTGETSHELL (SIOCDEVPRIVATE+12)
+#define FSTSETMON (SIOCDEVPRIVATE+13)
+#define FSTSETPORT (SIOCDEVPRIVATE+14)
+#define FSTCMD (SIOCDEVPRIVATE+15)
/* FSTWRITE
*
* Used to write a block of data (firmware etc) before the card is running
*/
struct fstioc_write {
- unsigned int size;
- unsigned int offset;
- unsigned char data[0];
+ unsigned int size;
+ unsigned int offset;
+ unsigned char data[0];
};
+struct fstioc_control_request {
+#define FSCONTROLREQUEST_VERSION 1
+
+ __u32 u_version; /* Version of this structure */
+ __u8 b_direction; /* 1 ==> HostToDevice, 0 ==> DeviceToHost */
+ __u8 by_request;
+ __u16 w_value;
+ __u16 w_index;
+ __u16 w_data_length;
+ __u8 data[256];
+};
/* FSTCPURESET and FSTCPURELEASE
*
* These take no additional data.
- * FSTCPURESET forces the cards CPU into a reset state and holds it there.
- * FSTCPURELEASE releases the CPU from this reset state allowing it to run,
+ * FSTCPURESET forces the cards CPU into a reset state and holds it
+ * there.
+ * FSTCPURELEASE releases the CPU from this reset state allowing it
+ * to run,
* the reset vector should be setup before this ioctl is run.
*/
@@ -96,156 +162,443 @@ struct fstioc_write {
* might be used to indicate a different (expanded) structure.
*/
struct fstioc_info {
- unsigned int valid; /* Bits of structure that are valid */
- unsigned int nports; /* Number of serial ports */
- unsigned int type; /* Type index of card */
- unsigned int state; /* State of card */
- unsigned int index; /* Index of port ioctl was issued on */
- unsigned int smcFirmwareVersion;
- unsigned long kernelVersion; /* What Kernel version we are working with */
- unsigned short lineInterface; /* Physical interface type */
- unsigned char proto; /* Line protocol */
- unsigned char internalClock; /* 1 => internal clock, 0 => external */
- unsigned int lineSpeed; /* Speed in bps */
- unsigned int v24IpSts; /* V.24 control input status */
- unsigned int v24OpSts; /* V.24 control output status */
- unsigned short clockStatus; /* lsb: 0=> present, 1=> absent */
- unsigned short cableStatus; /* lsb: 0=> present, 1=> absent */
- unsigned short cardMode; /* lsb: LED id mode */
- unsigned short debug; /* Debug flags */
- unsigned char transparentMode; /* Not used always 0 */
- unsigned char invertClock; /* Invert clock feature for syncing */
- unsigned char startingSlot; /* Time slot to use for start of tx */
- unsigned char clockSource; /* External or internal */
- unsigned char framing; /* E1, T1 or J1 */
- unsigned char structure; /* unframed, double, crc4, f4, f12, */
- /* f24 f72 */
- unsigned char interface; /* rj48c or bnc */
- unsigned char coding; /* hdb3 b8zs */
- unsigned char lineBuildOut; /* 0, -7.5, -15, -22 */
- unsigned char equalizer; /* short or lon haul settings */
- unsigned char loopMode; /* various loopbacks */
- unsigned char range; /* cable lengths */
- unsigned char txBufferMode; /* tx elastic buffer depth */
- unsigned char rxBufferMode; /* rx elastic buffer depth */
- unsigned char losThreshold; /* Attenuation on LOS signal */
- unsigned char idleCode; /* Value to send as idle timeslot */
- unsigned int receiveBufferDelay; /* delay thro rx buffer timeslots */
- unsigned int framingErrorCount; /* framing errors */
- unsigned int codeViolationCount; /* code violations */
- unsigned int crcErrorCount; /* CRC errors */
- int lineAttenuation; /* in dB*/
- unsigned short lossOfSignal;
- unsigned short receiveRemoteAlarm;
- unsigned short alarmIndicationSignal;
+ unsigned int valid; /* Bits of structure that are valid */
+ unsigned int nports; /* Number of serial ports */
+ unsigned int type; /* Type index of card */
+ unsigned int state; /* State of card */
+ unsigned int index; /* Index of port ioctl was issued on */
+ unsigned int smc_firmware_version;
+ unsigned long kernel_version; /* Kernel ver we are working with */
+ unsigned short line_interface; /* Physical interface type */
+ unsigned char proto; /* Line protocol */
+ unsigned char internal_clock; /* 1 => internal clock,
+ * 0 => external
+ */
+ unsigned int line_speed; /* Speed in bps */
+ unsigned int est_line_speed; /* Estimated speed in bps */
+ unsigned int v24IpSts; /* V.24 control input status */
+ unsigned int v24OpSts; /* V.24 control output status */
+ unsigned short clock_status; /* lsb: 0=> present, 1=> absent */
+ unsigned short cable_status; /* lsb: 0=> present, 1=> absent */
+ unsigned short card_mode; /* lsb: LED id mode */
+ unsigned short debug; /* Debug flags */
+ unsigned char transparent_mode; /* Not used always 0 */
+ unsigned char invert_clock; /* Invert clock feature for syncing */
+ unsigned char async_ability; /* The ability to do async */
+ unsigned char synth_ability; /* The ability to syth a clock */
+ unsigned char extended_clocking; /* New T4e clock modes */
+ unsigned char starting_slot; /* Time slot to use for start of tx */
+ unsigned char clock_source; /* External or internal */
+ unsigned char framing; /* E1, T1 or J1 */
+ unsigned char structure; /* unframed, double, crc4, f4, f12, */
+ /* f24 f72 */
+ unsigned char interface; /* rj48c or bnc */
+ unsigned char coding; /* hdb3 b8zs */
+ unsigned char line_build_out; /* 0, -7.5, -15, -22 */
+ unsigned char equalizer; /* short or lon haul settings */
+ unsigned char loop_mode; /* various loopbacks */
+ unsigned char range; /* cable lengths */
+ unsigned char tx_buffer_mode; /* tx elastic buffer depth */
+ unsigned char rx_buffer_mode; /* rx elastic buffer depth */
+ unsigned char los_threshold; /* Attenuation on LOS signal */
+ unsigned char idle_code; /* Value to send as idle timeslot */
+ unsigned int receive_buffer_delay; /* delay thro rx buffer timeslots */
+ unsigned int framing_error_count; /* framing errors */
+ unsigned int code_violation_count; /* code violations */
+ unsigned int crc_error_count; /* CRC errors */
+ int line_attenuation; /* in dB */
+ unsigned short loss_of_signal;
+ unsigned short receive_remote_alarm;
+ unsigned short alarm_indication_signal;
+ unsigned short _reserved[64];
+ unsigned char ignore_carrier; /* If set transmit regardless of
+ * carrier state
+ */
+ unsigned char num_tx_buffers; /* No of tx buffers in card window */
+ unsigned char num_rx_buffers; /* No of rx buffers in card window */
+ unsigned int tx_buffer_size; /* Size of tx buffers in card window */
+ unsigned int rx_buffer_size; /* Size of rx buffers in card window */
+ unsigned char terminal_type; /* Additional hdsl */
+ unsigned char annex_type;
+ unsigned char encap;
+ unsigned char test_mode;
+ unsigned char backoff;
+ unsigned char b_line_probing_enable;
+ unsigned char snrth;
+ unsigned char lpath;
+ unsigned short vpi;
+ unsigned short vci;
+ unsigned char activation_status;
+ unsigned char no_common_mode_status;
+ unsigned char transceiverStatus1;
+ unsigned char transceiverStatus2;
+ unsigned char line_loss;
+ char signal_quality;
+ unsigned char near_end_block_error_count;
+ char signal_to_noise_ratio;
+ unsigned char errored_second_count;
+ unsigned char severely_errored_second_count;
+ unsigned char loss_of_sync_word_second_count;
+ unsigned char unavailable_second_count;
+ char frequency_deviation;
+ char negotiated_power_back_off;
+ unsigned char negotiated_psd;
+ unsigned char negotiated_b_channels;
+ unsigned char negotiated_z_bits;
+ unsigned short negotiated_sync_word;
+ unsigned char negotiated_stuff_bits;
+ unsigned char chip_version;
+ unsigned char firmware_version;
+ unsigned char rom_version;
+ unsigned short atm_tx_cell_count;
+ unsigned short atm_rx_cell_count;
+ unsigned short atm_hec_error_count;
+ unsigned int atm_cells_dropped;
+ unsigned char transmit_msb_first;
+ unsigned char receive_msb_first;
+ unsigned char xpld_version;
+ unsigned char farEndCountryCode[2];
+ unsigned char farEndProviderCode[4];
+ unsigned char farEndVendorInfo[2];
+ unsigned char utopia_atm_status;
+ unsigned int termination;
+ unsigned int tx_rx_start;
+ unsigned char enable_nrzi_clocking; /* Ver 1 addition */
+ unsigned char low_latency; /* Ver 1 addition */
+ struct fst_device_stats stats; /* Ver 1 addition */
+ struct fstioc_async_conf async_conf; /* Ver 2 addition */
+ unsigned char iocinfo_version; /* Ver 2 addition */
+ unsigned char ext_sync_clock_enable; /* Ver 3 addition */
+ unsigned char ext_sync_clock_offset; /* Ver 3 addition */
+ unsigned int ext_sync_clock_rate; /* Ver 3 addition */
+ unsigned char pps_enable; /* Ver 3 addition */
+ unsigned char pps_offset; /* Ver 3 addition */
+ unsigned char card_rev_major; /* Ver 4 addition */
+ unsigned char card_rev_minor; /* Ver 4 addition */
+ unsigned char card_rev_build; /* Ver 4 addition */
+ unsigned int features; /* Ver 4 addition */
+};
+
+#define FST_MODE_HDLC 0
+#define FST_MODE_TRANSPARENT 1
+#define FST_MODE_BISYNC 2
+#define FST_MODE_ASYNC 3
+#define LOW_LATENCY_DISABLE 0
+#define LOW_LATENCY_RX 1
+#define LOW_LATENCY_TX 2
+#define LOWOW_LATENCY_RXTC 3
+
+/* FSTSNOTIFY
+ *
+ */
+#define FST_NOTIFY_OFF 0
+#define FST_NOTIFY_ON 1
+#define FST_NOTIFY_EXTENDED 2
+#define FST_NOTIFY_BASIC_SIZE (2*sizeof(int))
+
+/* FSTGSTATE
+ *
+ * Used to query why a state change message has been issued by the driver
+ * It could be because there was a change in line states or that the txq
+ * has reached an empty state
+ */
+struct fstioc_status {
+ int carrier_state;
+ int txq_length;
+ int rxq_length;
+ struct fst_device_stats stats;
+};
+
+/* FSTSYSREQ
+ *
+ * Used to provide a simple transparent command/repsonse interface between
+ * an application and the firmware running on the card
+ */
+struct fstioc_req {
+ unsigned short msg_type;
+ unsigned short msg_len;
+ unsigned short ret_code;
+ unsigned short i_reg_idx;
+ unsigned short value;
+ unsigned char u_msg[16];
+ unsigned char u_msg_reserved[16];
+ unsigned char u_reserved[4];
+};
+
+#define MSG_FIFO_DEF_SLAVE_1X 0x0001
+#define MSG_FIFO_DEF_SLAVE_16X 0x0002
+#define MSG_FIFO_DEF_MASTER 0x0003
+#define MSG_FIFO_EEPROM_RD 0x769b
+#define MSG_FIFO_EEPROM_WR 0xcd4a
+#define RSP_FIFO_SUCCESS 0x0000
+#define RSP_FIFO_FAILURE 0x0001
+
+/* FSTSETMON
+ *
+ * Used to provide a simple monitoring data
+ */
+#define FSTIOC_MON_VERSION 0
+#define FST_MON_RX 0
+#define FST_MON_TX 1
+
+struct fstioc_mon {
+ unsigned char version;
+ unsigned char tx_rx_ind;
+ unsigned int sequence;
+ unsigned long timestamp;
+ unsigned int length;
+};
+
+/* FSTSETPORT
+ *
+ * Used to provide a DSL port control
+ */
+#define FST_DSL_PORT_NORMAL 0
+#define FST_DSL_PORT_ACTIVE 1
+
+/* FSTCMD
+ *
+ * Used to read and write card data
+ */
+#define FSTCMD_GET_SERIAL 0
+#define FSTCMD_SET_V24O 1
+#define FSTCMD_GET_VERSION 2
+#define FSTCMD_SET_VERSION 3
+#define FSTCMD_GET_INTS 4
+#define FSTCMD_RESET_INTS 5
+#define FSTCMD_RESET_STATS 6
+#define FSTCMD_SET_READV 7
+#define FSTCMD_SET_CHAR 8
+#define FSTCMD_GET_PRESERVE_SIGNALS 9
+#define FSTCMD_SET_PRESERVE_SIGNALS 10
+#define FSTCMD_SET_LATENCY 11
+#define FSTCMD_UPDATE_CLOCK 12
+#define FSTCMD_SET_CUSTOM_RATE 13
+
+#ifdef __x86_64__
+#define fstioc_info_sz_old 316
+#define fstioc_info_sz_ver1 504
+#define fstioc_info_sz_ver2 512
+#define fstioc_info_sz_ver3 528
+#define fstioc_info_sz_ver4 536
+#define fstioc_info_sz_current sizeof(struct fstioc_info)
+#else
+#define fstioc_info_sz_old 312
+#define fstioc_info_sz_ver1 408
+#define fstioc_info_sz_ver2 416
+#define fstioc_info_sz_ver3 428
+#define fstioc_info_sz_ver4 436
+#define fstioc_info_sz_current sizeof(struct fstioc_info)
+#endif
+
+#define FST_VERSION 4
+#define FST_VERSION_CURRENT FST_VERSION
+#define FST_VERSION_V3 3
+#define FST_VERSION_V2 2
+#define FST_VERSION_V1 1
+#define FST_VERSION_OLD 0
+
+#define FST_READV_NORMAL 0
+#define FST_READV_SYNC 1
+#define FST_READV_SYNC2 2
+
+struct fstioc_char_data {
+ unsigned char queue_len;
+ unsigned char threshold;
+ unsigned char pad[14];
+};
+
+struct fstioc_latency_data {
+ unsigned int tx_size;
+ unsigned int rx_size;
+ unsigned int rate;
+};
+
+struct fstioc_cmd {
+ unsigned int version;
+ unsigned int command;
+ unsigned int status;
+ unsigned int input_data_len;
+ unsigned int output_data_len;
+ unsigned char *data_ptr;
+};
+
+#define FST_CUSTOM_RATE_CONFIG_VERSION 1
+#define FST_CUSTOM_RATE_CONFIG_LENGTH (33+1)
+#define FST_CUSTOM_RATE_CLOCK_SLAVE 0
+#define FST_CUSTOM_RATE_CLOCK_LOW_SLAVE 1
+#define FST_CUSTOM_RATE_CLOCK_LOW_MASTER 2
+#define FST_CUSTOM_CLOCK_MULTIPLIER_1 1
+#define FST_CUSTOM_CLOCK_MULTIPLIER_16 2
+
+struct fstioc_custom_rate_config {
+ unsigned int version;
+ unsigned int rate;
+ unsigned int permanent;
+ unsigned int multiplier; /* 1 or 16 */
+ unsigned int clock_type; /* slave, low_slave, low_master */
+ char rate_info[FST_CUSTOM_RATE_CONFIG_LENGTH];
};
/* "valid" bitmask */
-#define FSTVAL_NONE 0x00000000 /* Nothing valid (firmware not running).
- * Slight misnomer. In fact nports,
- * type, state and index will be set
- * based on hardware detected.
- */
-#define FSTVAL_OMODEM 0x0000001F /* First 5 bits correspond to the
- * output status bits defined for
- * v24OpSts
- */
-#define FSTVAL_SPEED 0x00000020 /* internalClock, lineSpeed, clockStatus
- */
-#define FSTVAL_CABLE 0x00000040 /* lineInterface, cableStatus */
-#define FSTVAL_IMODEM 0x00000080 /* v24IpSts */
-#define FSTVAL_CARD 0x00000100 /* nports, type, state, index,
- * smcFirmwareVersion
- */
-#define FSTVAL_PROTO 0x00000200 /* proto */
-#define FSTVAL_MODE 0x00000400 /* cardMode */
-#define FSTVAL_PHASE 0x00000800 /* Clock phase */
-#define FSTVAL_TE1 0x00001000 /* T1E1 Configuration */
-#define FSTVAL_DEBUG 0x80000000 /* debug */
-#define FSTVAL_ALL 0x00001FFF /* Note: does not include DEBUG flag */
+#define FSTVAL_NONE 0x00000000 /* Nothing valid (firmware not
+ * running). Slight misnomer. In fact
+ * nports, type, state and index will
+ * be set based on hardware detected.
+ */
+#define FSTVAL_OMODEM 0x0000001F /* First 5 bits correspond to the
+ * output status bits defined for
+ * v24OpSts
+ */
+#define FSTVAL_SPEED 0x00000020 /* internalClock, lineSpeed,
+ * clockStatus
+ */
+#define FSTVAL_CABLE 0x00000040 /* lineInterface, cableStatus */
+#define FSTVAL_IMODEM 0x00000080 /* v24IpSts */
+#define FSTVAL_CARD 0x00000100 /* nports, type, state, index,
+ * smcFirmwareVersion
+ */
+#define FSTVAL_PROTO 0x00000200 /* proto */
+#define FSTVAL_MODE 0x00000400 /* cardMode */
+#define FSTVAL_PHASE 0x00000800 /* Clock phase */
+#define FSTVAL_TE1 0x00001000 /* T1E1 Configuration */
+#define FSTVAL_BUFFERS 0x00002000 /* Tx and Rx buffer settings */
+#define FSTVAL_DSL_S1 0x00004000 /* DSL-S1 Configuration */
+#define FSTVAL_T4E 0x00008000 /* T4E Mk II Configuration */
+#define FSTVAL_FLEX 0x00010000 /* FarSync Flex */
+#define FSTVAL_ASYNC 0x00020000 /* Async config */
+#define FSTVAL_DEBUG 0x80000000 /* debug */
+#define FSTVAL_ALL 0x000FFFFF /* Note: does not include DEBUG flag */
/* "type" */
-#define FST_TYPE_NONE 0 /* Probably should never happen */
-#define FST_TYPE_T2P 1 /* T2P X21 2 port card */
-#define FST_TYPE_T4P 2 /* T4P X21 4 port card */
-#define FST_TYPE_T1U 3 /* T1U X21 1 port card */
-#define FST_TYPE_T2U 4 /* T2U X21 2 port card */
-#define FST_TYPE_T4U 5 /* T4U X21 4 port card */
-#define FST_TYPE_TE1 6 /* T1E1 X21 1 port card */
+#define FST_TYPE_NONE 0 /* Probably should never happen */
+#define FST_TYPE_T2P 1 /* T2P X21 2 port card */
+#define FST_TYPE_T4P 2 /* T4P X21 4 port card */
+#define FST_TYPE_T1U 3 /* T1U X21 1 port card */
+#define FST_TYPE_T2U 4 /* T2U X21 2 port card */
+#define FST_TYPE_T4U 5 /* T4U X21 4 port card */
+#define FST_TYPE_TE1 6 /* T1E1 X21 1 port card */
+#define FST_TYPE_DSL_S1 7 /* DSL-S1 card */
+#define FST_TYPE_T4E 8 /* T4E Mk II */
+#define FST_TYPE_FLEX1 9 /* FarSync Flex 1 port */
+#define FST_TYPE_T4UE 10 /* T4UE 4 port PCI Express */
+#define FST_TYPE_T2UE 11 /* T2UE 2 port PCI Express */
+#define FST_TYPE_T4Ep 12 /* T4E+ 4 port card */
+#define FST_TYPE_T2U_PMC 13 /* T2U_PMC 2 port PCI card */
+#define FST_TYPE_TE1e 14 /* TE1e X21 1 port PCI Express */
+#define FST_TYPE_T2Ee 15 /* T2Ee 2 port PCI Express */
+#define FST_TYPE_T4Ee 16 /* T4Ee 4 port PCI Express */
+#define FST_TYPE_FLEX2 17 /* FarSync Flex 1 port (v2) */
/* "family" */
-#define FST_FAMILY_TXP 0 /* T2P or T4P */
-#define FST_FAMILY_TXU 1 /* T1U or T2U or T4U */
+#define FST_FAMILY_TXP 0 /* T2P or T4P */
+#define FST_FAMILY_TXU 1 /* T1U or T2U or T4U */
/* "state" */
-#define FST_UNINIT 0 /* Raw uninitialised state following
- * system startup */
-#define FST_RESET 1 /* Processor held in reset state */
-#define FST_DOWNLOAD 2 /* Card being downloaded */
-#define FST_STARTING 3 /* Released following download */
-#define FST_RUNNING 4 /* Processor running */
-#define FST_BADVERSION 5 /* Bad shared memory version detected */
-#define FST_HALTED 6 /* Processor flagged a halt */
-#define FST_IFAILED 7 /* Firmware issued initialisation failed
- * interrupt
- */
+#define FST_UNINIT 0 /* Raw uninitialised state following
+ * system startup
+ */
+#define FST_RESET 1 /* Processor held in reset state */
+#define FST_DOWNLOAD 2 /* Card being downloaded */
+#define FST_STARTING 3 /* Released following download */
+#define FST_RUNNING 4 /* Processor running */
+#define FST_BADVERSION 5 /* Bad shared memory version detected */
+#define FST_HALTED 6 /* Processor flagged a halt */
+#define FST_IFAILED 7 /* Firmware issued initialisation failed
+ * interrupt
+ */
/* "lineInterface" */
#define V24 1
#define X21 2
#define V35 3
#define X21D 4
-#define T1 5
-#define E1 6
-#define J1 7
+#define NOCABLE 5
+#define RS530_449 6
+#define T1 7
+#define E1 8
+#define J1 9
+#define SHDSL 10
+#define RS485 11
+#define UX35C 12
+#define RS485_FDX 13
+
+#ifndef IF_IFACE_SHDSL
+#define IF_IFACE_SHDSL 0x1007 /* SHDSL (FarSite) */
+#define IF_IFACE_RS530_449 0x1008 /* RS530_449 (FarSite) */
+#define IF_IFACE_RS485 0x1009 /* RS485 (FarSite) */
+#endif
+#define IF_IFACE_RS485_FDX 0x100A /* RS485 Full Duplex (Farsite) */
+#define IF_IFACE_UX35C 0x100B /* UX35C (Farsite) */
/* "proto" */
-#define FST_RAW 4 /* Two way raw packets */
-#define FST_GEN_HDLC 5 /* Using "Generic HDLC" module */
+#define FST_HDLC 1 /* Cisco compatible HDLC */
+#define FST_PPP 2 /* Sync PPP */
+#define FST_MONITOR 3 /* Monitor only (raw packet reception) */
+#define FST_RAW 4 /* Two way raw packets */
+#define FST_GEN_HDLC 5 /* Using "Generic HDLC" module */
/* "internalClock" */
#define INTCLK 1
#define EXTCLK 0
+/*
+ * The bit pattern for extendedClocking is
+ * 8 4 2 1 |8 4 2 1
+ * ec |ttrx tttx irx itx
+ */
+
+#define EXT_CLOCK_NONE 0x00
+#define EXT_CLOCK_ERX_ETX 0x80
+#define EXT_CLOCK_ERX_ITX 0x81
+#define EXT_CLOCK_IRX_ETX 0x82
+#define EXT_CLOCK_IRX_ITX 0x83
+#define EXT_CLOCK_DTE_TT 0x84
+#define EXT_CLOCK_DCE_TT 0x8B
+
/* "v24IpSts" bitmask */
-#define IPSTS_CTS 0x00000001 /* Clear To Send (Indicate for X.21) */
+#define IPSTS_CTS 0x00000001 /* Clear To Send (Indicate for X.21) */
#define IPSTS_INDICATE IPSTS_CTS
-#define IPSTS_DSR 0x00000002 /* Data Set Ready (T2P Port A) */
-#define IPSTS_DCD 0x00000004 /* Data Carrier Detect */
-#define IPSTS_RI 0x00000008 /* Ring Indicator (T2P Port A) */
-#define IPSTS_TMI 0x00000010 /* Test Mode Indicator (Not Supported)*/
-
+#define IPSTS_DSR 0x00000002 /* Data Set Ready (T2P Port A) */
+#define IPSTS_DCD 0x00000004 /* Data Carrier Detect */
+#define IPSTS_RI 0x00000008 /* Ring Indicator (T2P Port A) */
+#define IPSTS_TMI 0x00000010 /* Test Mode Indicator
+ * (Not Supported)
+ */
/* "v24OpSts" bitmask */
-#define OPSTS_RTS 0x00000001 /* Request To Send (Control for X.21) */
+#define OPSTS_RTS 0x00000001 /* Request To Send (Ctrl for X.21) */
#define OPSTS_CONTROL OPSTS_RTS
-#define OPSTS_DTR 0x00000002 /* Data Terminal Ready */
-#define OPSTS_DSRS 0x00000004 /* Data Signalling Rate Select (Not
- * Supported) */
-#define OPSTS_SS 0x00000008 /* Select Standby (Not Supported) */
-#define OPSTS_LL 0x00000010 /* Maintenance Test (Not Supported) */
+#define OPSTS_DTR 0x00000002 /* Data Terminal Ready */
+#define OPSTS_DSRS 0x00000004 /* Data Signalling Rate Select (Not
+ * Supported)
+ */
+#define OPSTS_SS 0x00000008 /* Select Standby (Not Supported) */
+#define OPSTS_LL 0x00000010 /* Local Loop */
+#define OPSTS_DCD 0x00000020 /* Only when DCD is enabled as an
+ * output
+ */
+#define OPSTS_RL 0x00000040 /* Remote Loop */
/* "cardMode" bitmask */
#define CARD_MODE_IDENTIFY 0x0001
-/*
- * Constants for T1/E1 configuration
- */
+/* TxRx Start Parameters */
+#define START_TX 1
+#define START_RX 2
+#define START_TX_AND_RX (START_TX | START_RX)
+#define START_DEFAULT START_TX_AND_RX
-/*
- * Clock source
- */
+/* Constants for T1/E1 configuration */
+
+/* Clock source */
#define CLOCKING_SLAVE 0
#define CLOCKING_MASTER 1
-/*
- * Framing
- */
+/* Framing */
#define FRAMING_E1 0
#define FRAMING_J1 1
#define FRAMING_T1 2
-/*
- * Structure
- */
+/* Structure */
#define STRUCTURE_UNFRAMED 0
#define STRUCTURE_E1_DOUBLE 1
#define STRUCTURE_E1_CRC4 2
@@ -255,36 +608,32 @@ struct fstioc_info {
#define STRUCTURE_T1_24 6
#define STRUCTURE_T1_72 7
-/*
- * Interface
- */
+/* Interface */
#define INTERFACE_RJ48C 0
#define INTERFACE_BNC 1
-/*
- * Coding
- */
-
-#define CODING_HDB3 0
-#define CODING_NRZ 1
-#define CODING_CMI 2
-#define CODING_CMI_HDB3 3
-#define CODING_CMI_B8ZS 4
-#define CODING_AMI 5
-#define CODING_AMI_ZCS 6
-#define CODING_B8ZS 7
+/* Coding */
+#define CODING_HDB3 0
+#define CODING_NRZ 1
+#define CODING_CMI 2
+#define CODING_CMI_HDB3 3
+#define CODING_CMI_B8ZS 4
+#define CODING_AMI 5
+#define CODING_AMI_ZCS 6
+#define CODING_B8ZS 7
+#define CODING_NRZI 8
+#define CODING_FM0 9
+#define CODING_FM1 10
+#define CODING_MANCHESTER 11
+#define CODING_DIFF_MANCHESTER 12
-/*
- * Line Build Out
- */
+/* Line Build Out */
#define LBO_0dB 0
#define LBO_7dB5 1
#define LBO_15dB 2
#define LBO_22dB5 3
-/*
- * Range for long haul t1 > 655ft
- */
+/* Range for long haul t1 > 655ft */
#define RANGE_0_133_FT 0
#define RANGE_0_40_M RANGE_0_133_FT
#define RANGE_133_266_FT 1
@@ -295,29 +644,52 @@ struct fstioc_info {
#define RANGE_122_162_M RANGE_399_533_FT
#define RANGE_533_655_FT 4
#define RANGE_162_200_M RANGE_533_655_FT
-/*
- * Receive Equaliser
- */
+
+/* Receive Equaliser */
#define EQUALIZER_SHORT 0
#define EQUALIZER_LONG 1
-/*
- * Loop modes
- */
+/* Loop modes */
#define LOOP_NONE 0
#define LOOP_LOCAL 1
#define LOOP_PAYLOAD_EXC_TS0 2
#define LOOP_PAYLOAD_INC_TS0 3
#define LOOP_REMOTE 4
-/*
- * Buffer modes
- */
+/* Buffer modes */
#define BUFFER_2_FRAME 0
#define BUFFER_1_FRAME 1
#define BUFFER_96_BIT 2
#define BUFFER_NONE 3
+/* DSL Equipment types */
+#define EQUIP_TYPE_REMOTE 0
+#define EQUIP_TYPE_CENTRAL 1
+
+/* DSL Operating modes */
+#define ANNEX_A 1 /* US */
+#define ANNEX_B 0 /* EU */
+
+/* DSL ATM Encapsulation methods */
+#define ENCAP_PPP 0
+#define ENCAP_MPOA 1
+#define MPOA_HEADER_LEN 8
+
+/* DSL Test Modes */
+#define TEST_MODE_NONE 0
+#define TEST_MODE_DEFAULT TEST_MODE_NONE
+
+#define TEST_MODE_ALTERNATING_SINGLE_PULSE 1
+#define TEST_MODE_ANALOG_TRANSPARENT_LOOP 4
+#define TEST_MODE_ANALOG_NON_TRANSPARENT_LOOP 8
+#define TEST_MODE_TRANSMIT_SC_SR 9
+#define TEST_MODE_TRANSMIT_TC_PAM_SCRONE 10
+#define TEST_MODE_LINE_DRIVER_NO_SIGNAL 11
+#define TEST_MODE_AGC_TO_LINE_DRIVER_LOOP 12
+
+#define TEST_MODE_LOOP_TDM_TO_LINE 16
+#define TEST_MODE_LOOP_PAYLOAD_TO_LINE 17
+
/* Debug support
*
* These should only be enabled for development kernels, production code
@@ -329,23 +701,26 @@ struct fstioc_info {
#define FST_DEBUG 0x0000
#if FST_DEBUG
-extern int fst_debug_mask; /* Bit mask of actions to debug, bits
- * listed below. Note: Bit 0 is used
- * to trigger the inclusion of this
- * code, without enabling any actions.
- */
-#define DBG_INIT 0x0002 /* Card detection and initialisation */
-#define DBG_OPEN 0x0004 /* Open and close sequences */
-#define DBG_PCI 0x0008 /* PCI config operations */
-#define DBG_IOCTL 0x0010 /* Ioctls and other config */
-#define DBG_INTR 0x0020 /* Interrupt routines (be careful) */
-#define DBG_TX 0x0040 /* Packet transmission */
-#define DBG_RX 0x0080 /* Packet reception */
-#define DBG_CMD 0x0100 /* Port command issuing */
-
-#define DBG_ASS 0xFFFF /* Assert like statements. Code that
- * should never be reached, if you see
- * one of these then I've been an ass
- */
-#endif /* FST_DEBUG */
-
+extern int fst_debug_mask; /* Bit mask of actions to debug, bits
+ * listed below. Note: Bit 0 is used
+ * to trigger the inclusion of this
+ * code, without enabling any actions.
+ */
+#define DBG_INIT 0x0002 /* Card detection and initialisation */
+#define DBG_OPEN 0x0004 /* Open and close sequences */
+#define DBG_PCI 0x0008 /* PCI config operations */
+#define DBG_IOCTL 0x0010 /* Ioctls and other config */
+#define DBG_INTR 0x0020 /* Interrupt routines (be careful) */
+#define DBG_TX 0x0040 /* Packet transmission */
+#define DBG_RX 0x0080 /* Packet reception */
+#define DBG_CMD 0x0100 /* Port command issuing */
+#define DBG_ATM 0x0200 /* ATM processing */
+#define DBG_TTY 0x0400 /* PPPd processing */
+#define DBG_USB 0x0800 /* USB device */
+#define DBG_ASY 0x1000 /* Async functions */
+#define DBG_FIFO 0x2000 /* Fifo functions */
+#define DBG_ASS 0x0001 /* Assert like statements. Code that
+ * should never be reached, if you see
+ * one of these then I've been an ass
+ */
+#endif /* FST_DEBUG */
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists