| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 27 Sep 2013 15:17:58 -0500
From: Ajit Khaparde <ajit.khaparde@...lex.com>
To: <netdev@...r.kernel.org>
Subject: [PATCH net 3/7] be2net: Fix VLAN promiscuous mode programming
When the interface runs out of the allocated entries in VLAN table,
we program the interface in VLAN promiscuous mode.
Use OPCODE_COMMON_NTWK_RX_FILTER to set VLAN Promiscuous mode
instead of OPCODE_COMMON_NTWK_VLAN_CONFIG.
Signed-off-by: Ajit Khaparde <ajit.khaparde@...lex.com>
---
drivers/net/ethernet/emulex/benet/be.h | 1 +
drivers/net/ethernet/emulex/benet/be_cmds.c | 9 ++++++++
drivers/net/ethernet/emulex/benet/be_cmds.h | 2 ++
drivers/net/ethernet/emulex/benet/be_main.c | 34 ++++++++++++++++++++++++-----
4 files changed, 40 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index ace5050..95d303d 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -333,6 +333,7 @@ enum vf_state {
#define BE_FLAGS_LINK_STATUS_INIT 1
#define BE_FLAGS_WORKER_SCHEDULED (1 << 3)
+#define BE_FLAGS_VLAN_PROMISC (1 << 4)
#define BE_FLAGS_NAPI_ENABLED (1 << 9)
#define BE_UC_PMAC_COUNT 30
#define BE_VF_UC_PMAC_COUNT 2
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 1ab5dab..bd0e0c0 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -180,6 +180,9 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
dev_err(&adapter->pdev->dev,
"opcode %d-%d failed:status %d-%d\n",
opcode, subsystem, compl_status, extd_status);
+
+ if (extd_status == MCC_ADDL_STS_INSUFFICIENT_RESOURCES)
+ return extd_status;
}
}
done:
@@ -1812,6 +1815,12 @@ int be_cmd_rx_filter(struct be_adapter *adapter, u32 flags, u32 value)
} else if (flags & IFF_ALLMULTI) {
req->if_flags_mask = req->if_flags =
cpu_to_le32(BE_IF_FLAGS_MCAST_PROMISCUOUS);
+ } else if (flags & BE_FLAGS_VLAN_PROMISC) {
+ req->if_flags_mask = cpu_to_le32(BE_IF_FLAGS_VLAN_PROMISCUOUS);
+
+ if (value == ON)
+ req->if_flags =
+ cpu_to_le32(BE_IF_FLAGS_VLAN_PROMISCUOUS);
} else {
struct netdev_hw_addr *ha;
int i = 0;
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 51a93bd..108ca8a 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -60,6 +60,8 @@ enum {
MCC_STATUS_NOT_SUPPORTED = 66
};
+#define MCC_ADDL_STS_INSUFFICIENT_RESOURCES 0x16
+
#define CQE_STATUS_COMPL_MASK 0xFFFF
#define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */
#define CQE_STATUS_EXTD_MASK 0xFFFF
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 31fa13b..036f583 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1013,18 +1013,40 @@ static int be_vid_config(struct be_adapter *adapter)
status = be_cmd_vlan_config(adapter, adapter->if_handle,
vids, num, 1, 0);
- /* Set to VLAN promisc mode as setting VLAN filter failed */
if (status) {
- dev_info(&adapter->pdev->dev, "Exhausted VLAN HW filters.\n");
- dev_info(&adapter->pdev->dev, "Disabling HW VLAN filtering.\n");
- goto set_vlan_promisc;
+ /* Set to VLAN promisc mode as setting VLAN filter failed */
+ if (status == MCC_ADDL_STS_INSUFFICIENT_RESOURCES)
+ goto set_vlan_promisc;
+ dev_err(&adapter->pdev->dev,
+ "Setting HW VLAN filtering failed.\n");
+ } else {
+ if (adapter->flags & BE_FLAGS_VLAN_PROMISC) {
+ /* hw VLAN filtering re-enabled. */
+ status = be_cmd_rx_filter(adapter,
+ BE_FLAGS_VLAN_PROMISC, OFF);
+ if (!status) {
+ dev_info(&adapter->pdev->dev,
+ "Disabling VLAN Promiscuous mode.\n");
+ adapter->flags &= ~BE_FLAGS_VLAN_PROMISC;
+ dev_info(&adapter->pdev->dev,
+ "Re-Enabling HW VLAN filtering\n");
+ }
+ }
}
return status;
set_vlan_promisc:
- status = be_cmd_vlan_config(adapter, adapter->if_handle,
- NULL, 0, 1, 1);
+ dev_warn(&adapter->pdev->dev, "Exhausted VLAN HW filters.\n");
+
+ status = be_cmd_rx_filter(adapter, BE_FLAGS_VLAN_PROMISC, ON);
+ if (!status) {
+ dev_info(&adapter->pdev->dev, "Enable VLAN Promiscuous mode\n");
+ dev_info(&adapter->pdev->dev, "Disabling HW VLAN filtering\n");
+ adapter->flags |= BE_FLAGS_VLAN_PROMISC;
+ } else
+ dev_err(&adapter->pdev->dev,
+ "Failed to enable VLAN Promiscuous mode.\n");
return status;
}
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists